Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

Australia and New Zealand

International

6 credentials, in every rating tool and policy. Clear selection

Climate Active

Where it earns points or counts, rating tool by rating tool. About Climate Active

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Responsible Products Value(credit title not shown under Green Building Council of Australia's terms)
Status
Accepted
Named as
Climate Active Standard for Products & Services
Edition named
Not stated by the tool
Earns
Responsible Products Value 5 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value

NABERS Embodied Carbon v2.1 (pilot)Rating tool

10.3 Claiming carbon neutral materials; 14.8.1
Status
Accepted with conditions
Named as
Climate Active Product Certification (Public Disclosure Statement)
Edition named
Not stated by the tool
On what basis
Carbon offsets, modules A1-A3
Products
Individual building materials
Scope
Carbon Removal Indicator only; does not affect the star rating or emissions intensity
Conditions
- a product-specific emission factor for the Climate Active certified product is used per 9.4.5
- individual building materials only
- covers extraction, processing and manufacture only (A1-A3)
- public disclosure statement for the year the material was purchased
- as-built evidence that the specific material was used
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 67, 94
10.4.2.1; 10.4.2.5 Finding stored biogenic carbon in a Climate Active Public Disclosure Statement; 10.4.3
Status
Accepted with conditions
Named as
Climate Active Product Certification (Public Disclosure Statement)
Edition named
Not stated by the tool
On what basis
Estimated stored biogenic carbon (Formula 10.4.3a)
Products
Timber products
Scope
Carbon Removal Indicator only
Conditions
- timber or paper material only
- the certification confirms the material is from a sustainably managed source
- stored carbon must be calculated with the 10.4.3 method
- water content, moisture content or dry-matter carbon content from the statement are used where published, otherwise the default assumptions apply
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 68, 70, 71
12.3.2.2 Standard for acceptable data (construction and commissioning energy); 14.10.1
Status
Accepted with conditions
Named as
Climate Active Building Certification (Public Disclosure Statement)
Edition named
Not stated by the tool
On what basis
Site construction and commissioning energy use
Products
Construction and commissioning energy (not a product)
Scope
Evidence for replacing the default construction energy rate only
Conditions
- clearly shows the amount of energy use
- clearly shows the date of sale or time period of use
- record from a third party
- for construction and commissioning energy only (12.3.2.2), not for material emissions, where only product certifications count (p. 12)
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 77, 95
9.4.2 a); 9.4.5.1 Conforming Climate Active Public Disclosure Statements; 9.4.5.2
Status
Accepted with conditions
Named as
Climate Active Product Certification (Public Disclosure Statement)
Edition named
Not stated by the tool
On what basis
GHG total emissions, modules A1-A3, entered as GWPT
Products
Any included material
Scope
Product-level certification only; other Climate Active certifications are not considered (definition)
Conditions
Not shown under New South Wales Government (NABERS)'s terms
Reads two ways
SC-006: the tool reads two ways (p. 53 and p. 62); this row follows p. 62
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 12, 53, 62

Australian Government ESP PolicyProcurement policy

Evaluation guidance – Products, Table 1 (row 'Climate Active Carbon Neutral')
Status
Accepted with conditions
Named as
Carbon Neutral (printed as 'Climate Active Carbon Neutral')
Edition named
Not stated by the tool
On what basis
listed as an example in Table 1
Products
All
Scope
Table 1 gives examples and is not exhaustive. Focus area printed: Climate only.
Conditions
- Climate Active Carbon Neutral certification
- certification held for the product
Source
Australian Government ESP Policy · p. 9

Not named by: IS Rating v2.1, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read Climate Active’s requirements →

Declare

Where it earns points or counts, rating tool by rating tool. About Declare

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Counts towards Responsible Products Value

Declare
Status
Accepted
Edition named
Declare 2.0 - Declared
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Declare
Status
Accepted
Edition named
Declare 2.0 - Red List Approved
Earns
Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Declare
Status
Accepted
Edition named
Declare 2.0 - Red List Free
Earns
Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value

Australian Government ESP PolicyProcurement policy

Evaluation guidance – Products, Table 1 (row 'Declare')
Status
Accepted with conditions
Named as
Declare
Edition named
Not stated by the tool
On what basis
listed as an example in Table 1
Products
FFE
Scope
Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
Conditions
FFE products only
Source
Australian Government ESP Policy · p. 9

Homestar v5Rating tool

EN3 Sustainable Materials, means of compliance 'Declare'
Status
Accepted
Named as
Declare
Edition named
Not stated by the tool
Level
0.25 · points per material category
On what basis
material category with at least 50% “compliant” (Homestar’s word) content
Products
not stated by the tool
Source
Homestar v5 · EN3 · EN3 p. 11

Homestar v4.1, supersededRating tool

MAT-1 Table 21 Declare
Status
Accepted
Named as
Declare
Edition named
Not stated by the tool
Level
0.5 · MAT-1 points per material category
On what basis
Declare labelled products
Products
Any MAT-1 material category
Source
Homestar v4.1, superseded · MAT-1 · MAT p. 6

LEED v5 BD+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
version 2.0; v2.0 or later
Edition named
v2.0
Level
- Declare v2.0: 1
- Red List Free or Approved, third-party “verified”: 2
· LEED multi-attribute score (max 5)
Draws on
Human Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
version 2.0; v2.0 or later
Edition named
v2.0
Level
- Declare v2.0: 1
- Red List Free or Approved, third-party “verified”: 2
· LEED multi-attribute score (max 5)
Draws on
Human Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 ID+C product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 ID+C · MRc4 · p. 5

LEED v4.1 BD+CRating tool

Counts towards MR Credit

Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Red List Free, LBC Red List Free, or Declared · Declare label designation
On what basis
per product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 100
Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
LBC Red List Approved or LBC Compliant · Declare label designation
On what basis
per product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 100
Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Red List Free or LBC Red List Free · Declare label designation
On what basis
valued as 1 product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 102

LEED v4.1 ID+CRating tool

Counts towards MR Credit

Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Red List Free, LBC Red List Free, or Declared · Declare label designation
On what basis
per product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 48
Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
LBC Red List Approved or LBC Compliant · Declare label designation
On what basis
per product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 48
Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Red List Free or LBC Red List Free · Declare label designation
On what basis
per product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 50

WELL v2Rating tool

X07 Materials Transparency, Part 1 Select Products With Disclosed Ingredients
Status
Accepted
Named as
Declare label
Edition named
Not stated by the tool
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 25 distinct products.
Source
WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 2 Select Products With Enhanced Ingredient Disclosure
Status
Accepted with conditions
Named as
Declare label
Edition named
Not stated by the tool
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 15 distinct products.
Conditions
- All ingredients disclosed down to 100 ppm
- All ingredients publicly disclosed
Source
WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 3 Select Products With Third-Party Verified Ingredients
Status
Accepted with conditions
Named as
Declare label
Edition named
Not stated by the tool
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 15 distinct products.
Conditions
Ingredient disclosure “verified” (WELL’s word) by a third party not affiliated with the manufacturer or the certificate
Source
WELL v2 · X07 (materials/feature/7)

Living Building Challenge 4.1Rating tool · 4.1 Program Manual (January 2026)

I12 Responsible Materials (Core Imperative) · Declare Labels Requirement
Status
Accepted with conditions
Named as
Declare label
Edition named
Not stated by the tool
Conditions
Not shown under International Living Future Institute (ILFI)'s terms
I12 Responsible Materials (Core Imperative) · Definition of Multipliers
Status
Accepted with conditions
Named as
Declare label
Edition named
Not stated by the tool
Conditions
Not shown under International Living Future Institute (ILFI)'s terms
I14-3 Responsible Sourcing · Declare Product Requirement
Status
Accepted with conditions
Named as
Declare label
Edition named
Not stated by the tool
Conditions
Not shown under International Living Future Institute (ILFI)'s terms

Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, EnviroDevelopment v4, EarthCheck BPDS v5, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read Declare’s requirements →

Health Product Declaration

Where it earns points or counts, rating tool by rating tool. About Health Product Declaration

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

LEED v5 BD+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
Health Product Declaration
Edition named
Not stated by the tool
Level
- pre-checked, 1,000 ppm: 1
- third-party “verified”, 100 ppm: 2
· LEED multi-attribute score (max 5)
Draws on
Human Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
Health Product Declaration
Edition named
Not stated by the tool
Level
- pre-checked, 1,000 ppm: 1
- third-party “verified”, 100 ppm: 2
· LEED multi-attribute score (max 5)
Draws on
Human Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 ID+C product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 ID+C · MRc4 · p. 5

LEED v4.1 BD+CRating tool

Counts towards MR Credit

Health Product Declaration
Status
Accepted with conditions
Edition named
Not stated by the tool
On what basis
per end use product
Products
permanently installed products (end use product)
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 101
Health Product Declaration
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1 product · products counted toward credit achievement
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 102
Health Product Declaration
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 102

LEED v4.1 ID+CRating tool

Counts towards MR Credit

Health Product Declaration
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
complete HPD, hazards disclosed · disclosure completeness
On what basis
end use product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 48
Health Product Declaration
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1 product · products (credit achievement calculation)
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 50
Health Product Declaration
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1.5 products · products (credit achievement calculation)
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 50

WELL v2Rating tool

X07 Materials Transparency, Part 1 Select Products With Disclosed Ingredients
Status
Accepted with conditions
Named as
Health Product Declaration
Edition named
Not stated by the tool
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 25 distinct products.
Conditions
Not shown under International WELL Building Institute pbc's terms
Source
WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 2 Select Products With Enhanced Ingredient Disclosure
Status
Accepted with conditions
Named as
Health Product Declaration
Edition named
Not stated by the tool
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 15 distinct products.
Conditions
Not shown under International WELL Building Institute pbc's terms
Source
WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 3 Select Products With Third-Party Verified Ingredients
Status
Accepted with conditions
Named as
Health Product Declaration
Edition named
Not stated by the tool
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 15 distinct products.
Conditions
Not shown under International WELL Building Institute pbc's terms
Source
WELL v2 · X07 (materials/feature/7)

Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, Australian Government ESP Policy, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read Health Product Declaration’s requirements →

International EPD System

Where it earns points or counts, rating tool by rating tool. About International EPD System

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

NABERS Embodied Carbon v2.1 (pilot)Rating tool

9.4.3.1 d) Conforming EPDs
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
Products
Any included material with a product-specific EPD
Scope
Same scope as the EPD rows
The rule
Not shown under New South Wales Government (NABERS)'s terms
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 59

IS Rating v2.1Rating tool

Counts towards Rso-7

International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
0.75 · Sustainability Factor (SF)
On what basis
Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
Products
materials and products (any category)
Scope
Not shown under Infrastructure Sustainability Council's terms
The rule
Not shown under Infrastructure Sustainability Council's terms
Source
IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57, 59
International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
0.50 · Sustainability Factor (SF)
On what basis
Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
Products
materials and products (any category)
Scope
Not shown under Infrastructure Sustainability Council's terms
The rule
Not shown under Infrastructure Sustainability Council's terms
Source
IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57, 59

Australian Government ESP PolicyProcurement policy

SESP Template – Products, 'Products have a lower environmental footprint'; Evaluation guidance – Products, 'Evidence of product sustainability'
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
Products
FFE, ICT Goods, Textiles
Scope
The rule is on the EPD; class membership is on the programme.
The rule
- EPD “verified” (the ESP Policy’s word) by a third party
- EPD to ISO 14025
Source
Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5, 6

Homestar v5Rating tool

EN3 Sustainable Materials, EPD industry-wide; Additional Guidance on EPDs
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
Level
0.75 point · points per material category
On what basis
industry-wide EPD format
Products
not stated by the tool
The rule
Not shown under New Zealand Green Building Council's terms
Source
Homestar v5 · EN3 · EN3 p. 10, 12
EN3 Sustainable Materials, EPD product-specific; Additional Guidance on EPDs
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
Level
1.25 points · points per material category
On what basis
product-specific EPD format
Products
not stated by the tool
The rule
- product-specific EPD that Homestar calls “third-party verified”
- independently audited
- cradle-to-gate scope as a minimum
Source
Homestar v5 · EN3 · EN3 p. 10, 12

Homestar v4.1, supersededRating tool

MAT-1 Table 21 Environmental product Declaration; industry-wide EPD
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
Level
1 · MAT-1 points per material category
On what basis
Industry wide EPD
Products
Any MAT-1 material category
The rule
- industry-wide EPD
- independently audited
- cradle-to-gate scope at minimum
- manufacturer recognised as a participant in the EPD
Source
Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7
MAT-1 Table 21 Environmental product Declaration; product-specific EPD
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
Level
1.5 · MAT-1 points per material category
On what basis
Product Specific EPD
Products
Any MAT-1 material category
The rule
- product-specific EPD
- independently audited
- cradle-to-gate scope at minimum
Source
Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7

EnviroDevelopment v4Rating tool

Materials 4.2.5(b), (e), (f) Structure: EPD to EN15804 options for non-structural steel, structural timber and bricks. All ten typology sections.
Status
Accepted as a kind of credential
Named as
International EPD System
Edition named
Not stated by the tool
Products
non-structural steel; structural timber; bricks
The rule
Not recorded
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.9 Alternative compliance (4.2.8 in Commercial). All ten typology sections.
Status
Accepted as a kind of credential
Named as
International EPD System
Edition named
Not stated by the tool
Products
procured materials (any)
The rule
Not recorded
Source
EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

EarthCheck BPDS v5Rating tool

30.1 Guidance: fallback where no formal rating is available for a material
Status
Accepted as an owner ruling
Named as
International EPD System
Edition named
Not stated by the tool
Level
4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
Products
Material categories listed in the 30.1 guidance
Scope
Not shown under EarthCheck Pty Ltd's terms
The rule
Not shown under EarthCheck Pty Ltd's terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
Source
EarthCheck BPDS v5 · p. 75

LEED v5 BD+CRating tool

MRc2(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
Level
1–3 POINTS · points
On what basis
project GWP reduction against industry averages (Table 1)
Products
structure, enclosure and hardscape materials
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc2 · p. 2, 3
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
· LEED multi-attribute score (max 5)
Draws on
Climate Health, Ecosystem Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
· LEED multi-attribute score (max 5)
Draws on
Climate Health, Ecosystem Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 ID+C product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 ID+C · MRc4 · p. 5

LEED v4.1 BD+CRating tool

Counts towards MR Credit

International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per permanently installed product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 96
International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
one whole product · products counted toward credit achievement
On what basis
per permanently installed product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 96
International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
½ product · products counted toward credit achievement
On what basis
per product with an action plan
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
1 product · products counted toward credit achievement
On what basis
per product with an optimization report
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per product with an optimization report
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
2 products · products counted toward credit achievement
On what basis
per product with an optimization report
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per product
Products
products under the Furniture and Medical Furnishings credit
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 106
International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
one whole product · products counted toward credit achievement
On what basis
per product
Products
products under the Furniture and Medical Furnishings credit
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 106

LEED v4.1 ID+CRating tool

Counts towards MR Credit

International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
valued as one whole product · products (credit achievement calculation)
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 44
International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
valued as 1.5 products · products (credit achievement calculation)
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 44
International EPD System
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
½ product; 1 product; 1.5 products; 2 products · products (credit achievement calculation)
On what basis
per product, by report type
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
Source
LEED v4.1 ID+C · MR Credit · p. 45

BREEAM International NC v7.1Rating tool

Mat 02 Environmental product declarations, Table 74 Validity
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
Level
0.5 (EPD for more than one product in the same product category, more than one manufacturer) / 0.75 (more than one product, single manufacturer) / 1.5 (single product or colour/pattern variations, single manufacturer) · EPD points
On what basis
Per EPD, by EPD type (0.5 / 0.75 / 1.5, see EPD rows)
Products
Construction products
The rule
- EPD unexpired at the point of specification
- Product installed in the building by the end of construction
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- EPD not pending verification at the time of specification (CN2)
Source
BREEAM International NC v7.1 · Mat 02 · p. 304

BREEAM International NC v6.0, supersededRating tool

Mat 01 Life cycle impacts, criterion 5; CN3.2; Relevant definitions
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
On what basis
per product covered by an EPD that BREEAM calls “verified”
Products
construction products, classified by Mat 03 Table 46 material categories
Scope
Only two EPDs per classification group may be counted.
The rule
Not shown under BRE Global Ltd's terms
Source
BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
Mat 01 Life cycle impacts, exemplary level criterion 7; CN3.2
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
International EPD System
Edition named
Not stated by the tool
On what basis
per product covered by a manufacturer specific EPD that BREEAM calls “verified”
Products
construction products, classified by Mat 03 Table 46 material categories
Scope
Exemplary level only. Only two EPDs per classification group may be counted.
The rule
Not shown under BRE Global Ltd's terms
Source
BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279

Not named by: WELL v2.

Read International EPD System’s requirements →

PEFC

Where it earns points or counts, rating tool by rating tool. About PEFC

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Responsible Products Value(credit title not shown under Green Building Council of Australia's terms)
Status
Accepted
Named as
PEFC
Edition named
PEFC ST 1003: 2018
Earns
Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value

NABERS Embodied Carbon v2.1 (pilot)Rating tool

10.4.1; 10.4.4; 14.8.2
Status
Accepted with conditions
Named as
PEFC
Edition named
Not stated by the tool
Products
Timber and paper materials
Scope
Stored biogenic carbon in the Carbon Removal Indicator only
Conditions
- timber or paper material only
- certified by Responsible Wood as part of PEFC (per 10.4.1)
- retain certification details including licence number
- where an EPD states the certified share, at least 95 % is acceptable
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94

IS Rating v2.1Rating tool

Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
Status
Klar Cite hasn't checked this yet
Named as
PEFC
Edition named
Not stated by the tool
Source
IS Rating v2.1 · Rso-7 · p. 54

Homestar v5Rating tool

EN2 Embodied Carbon, Assessment, Biogenic carbon
Status
Accepted with conditions
Named as
PEFC
Edition named
Not stated by the tool
On what basis
biogenic carbon sequestration may be counted in the modules A-D lifecycle footprint
Products
Timber and engineered wood products
Scope
No sequestration in A1-A5 emissions used for points 2-6.
Conditions
- the timber or engineered wood must have achieved EN3 points for PEFC
- sequestration counts only in the overall A-D footprint, not in A1-A5
- evidence of responsible sourcing in the materials specification
Source
Homestar v5 · EN2 · EN2 p. 4
EN3 Sustainable Materials, means of compliance 'Programme for the Endorsement of Forest Certification (PEFC)'
Status
Accepted
Named as
PEFC
Edition named
Not stated by the tool
Level
1.5 · points per material category
On what basis
material category with at least 50% “compliant” (Homestar’s word) content
Products
Structural and framing timber, other solid timber, engineered wood, timber cladding, flooring
Scope
The list shows 'PEFC Certified' in the EWP & Timber and Flooring EN3 columns only. List note d: final-product certificates only.
Source
Homestar v5 · EN3 · EN3 p. 9; List p. 1

Homestar v4.1, supersededRating tool

MAT-1 Table 21 Programme for the Endorsement of Forest Certification; list columns EWP & Timber and Flooring / Product Sustainability
Status
Accepted with conditions
Named as
PEFC
Edition named
Not stated by the tool
Level
2 · MAT-1 points per material category
On what basis
material is PEFC certified
Products
Engineered wood products and timber; flooring
Scope
List shows 'PEFC Certified' only in the EWP & Timber and Flooring columns
Conditions
- PEFC certified
- certificate for the final product
Source
Homestar v4.1, superseded · MAT-1 · MAT p. 4; List p. 1

EnviroDevelopment v4Rating tool

Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. All ten typology sections.
Status
Accepted with conditions
Named as
PEFC
Edition named
Not stated by the tool
Level
certified
On what basis
certified to a PEFC standard
Products
structural timber
Scope
Built form structure option. It is an alternative to FSC or an EPD to EN15804.
Conditions
product is structural timber
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.6(a) Envelope / linings: timber window frames. All ten typology sections.
Status
Accepted with conditions
Named as
PEFC
Edition named
Not stated by the tool
Level
accredited/endorsed
Products
timber window frames
Scope
Building envelope option.
Conditions
product is timber window frames
Source
EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307
Materials 4.2.8(c) Furniture, fixtures, equipment and finishes: joinery. Lettered 4.2.8(f) in Mixed Use. All ten typology sections.
Status
Accepted with conditions
Named as
PEFC
Edition named
Not stated by the tool
Level
certified/endorsed
Products
joinery
Scope
Furniture, fixtures, equipment and finishes option.
Conditions
product is joinery
Source
EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307

LEED v5 BD+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
PEFC
Edition named
Not stated by the tool
Level
- Legal sourcing with disclosure: 1
- PEFC Recycled: 2
- PEFC Certified: 3
· LEED multi-attribute score (max 5)
Draws on
Ecosystem Health, Social Health & Equity, Circular Economy
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
wood products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
PEFC
Edition named
Not stated by the tool
Level
- Legal sourcing with disclosure: 1
- PEFC Recycled: 2
- PEFC Certified: 3
· LEED multi-attribute score (max 5)
Draws on
Ecosystem Health, Social Health & Equity, Circular Economy
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
wood products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 ID+C · MRc4 · p. 5

BREEAM International NC v7.1Rating tool

Man 03 Responsible construction, legally harvested and traded timber evidence table
Status
Accepted
Named as
PEFC certification (includes products labelled PEFC mixed sources)
Edition named
Not stated by the tool
Level
Yes / Yes · Demonstrates timber is legally harvested / Demonstrates timber is legally traded
On what basis
Evidence type for the legally harvested and traded timber requirement
Products
Timber
Scope
Applies only to new formwork, scaffolding boards or other new temporary site timber purchased for the project. Reused timber that can be “verified” (BREEAM’s word) is excluded.
Source
BREEAM International NC v7.1 · p. 66
Mat 03 Responsible sourcing, GN18 Table 1
Status
Accepted
Named as
'PEFC Certified', 'PEFC Recycled'
Edition named
Not stated by the tool
Level
5 · RSCS summary score level (scale 1 to 10)
On what basis
Per label, used in the Mat 03 calculator tool
Products
not stated by the tool
Source
BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
Mat 03 Responsible sourcing, GN18 Table 1
Status
Accepted
Named as
PEFC
Edition named
'PEFC Certified - 100% PEFC Origin'
Level
7 · RSCS summary score level (scale 1 to 10)
On what basis
Per label, used in the Mat 03 calculator tool
Products
not stated by the tool
Source
BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

BREEAM International NC v6.0, supersededRating tool

Mat 03 criterion 1 (legally harvested and traded timber), evidence table
Status
Accepted with conditions
Named as
PEFC
Edition named
Not stated by the tool
Products
timber and timber-based products
Scope
Prerequisite evidence only, not scored.
Conditions
- named as an example of certification for legally harvested and traded timber
- evidence listed for the interim design stage
- final post-construction stage needs documentary evidence that all timber used is legally harvested and traded
Source
BREEAM International NC v6.0, superseded · Mat 03 · p. 291
Mat 03 criterion 5 (Step 1.3); GN18 Table 1
Status
Accepted with conditions
Named as
'PEFC Certified' 'PEFC Recycled'
Edition named
Not stated by the tool
Level
5 · RSCS summary score level (scale 1 to 10)
On what basis
per construction product, entered in the BREEAM International Mat 03 tool
Products
timber and timber-based products
Scope
In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
Conditions
PEFC Certified or PEFC Recycled label
Source
BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)
Mat 03 criterion 5 (Step 1.3); GN18 Table 1
Status
Accepted with conditions
Named as
PEFC
Edition named
'PEFC Certified - 100% PEFC Origin'
Level
7 · RSCS summary score level (scale 1 to 10)
On what basis
per construction product, entered in the BREEAM International Mat 03 tool
Products
timber and timber-based products
Scope
In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
Conditions
PEFC Certified - 100% PEFC Origin label
Source
BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 7 (GN18)

Not named by: Australian Government ESP Policy, EarthCheck BPDS v5, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2.

Read PEFC’s requirements →

Steel Sustainability Australia

Where it earns points or counts, rating tool by rating tool. About Steel Sustainability Australia

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Counts towards Responsible Products Value

Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.1 - Level 1
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.2 - Level 1
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.3 - Level 1
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.4 - Level 1
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.0 - Level 1
Earns
Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.0 - Level 2B
Earns
Responsible Products Value 6 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.5 - Level 1
Earns
Responsible Products Value 9 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.0 - Level 2A
Earns
Responsible Products Value 12 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.0 - Level 3
Earns
Responsible Products Value 13 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.1 - Level 2A
Earns
Responsible Products Value 13 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.1 - Level 2B
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.2 - Level 2A
Earns
Responsible Products Value 13 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.2 - Level 2B
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.3 - Level 2A
Earns
Responsible Products Value 13 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.3 - Level 2B
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.4 - Level 2A
Earns
Responsible Products Value 13 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.4 - Level 2B
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.1 - Level 3
Earns
Responsible Products Value 17 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.2 - Level 3
Earns
Responsible Products Value 17 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.3 - Level 3
Earns
Responsible Products Value 17 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.4 - Level 3
Earns
Responsible Products Value 17 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.5 - Level 2A
Earns
Responsible Products Value 17 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.5 - Level 2B
Earns
Responsible Products Value 15 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.5 - Level 3
Earns
Responsible Products Value 21 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value

Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, Australian Government ESP Policy, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read Steel Sustainability Australia’s requirements →