Ratings & Policy
Find where a product credential earns points or counts, and what each rating tool or policy accepts.
Pick any rating tools or policies and any credentials. The results narrow to what you pick.
Australia and New Zealand
Which credential?
- Aluminium Stewardship Initiative
- BEP PVC
- BES 6001
- Blue Angel
- CARES Sustainable Constructional Steel
- Carpet Institute
- Climate Active
- Concrete Sustainability Council
- Cradle to Cradle Certified
- Declare
- Eco Choice Aotearoa
- EMICODE
- EPD
- EPD Australasia
- EU Ecolabel
- FSC
- GECA
- Global GreenTag
- Global Organic Textile Standard
- Global Responsible Textile Standard
- Green Seal
- Health Product Declaration
- International EPD System
- Living Product Challenge
- Nordic Swan
- PEFC
- Product Carbon Footprint
- Responsible Steel
- Responsible Wood
- SCS Standards
- Steel Sustainability Australia
- Sustainable Forestry Initiative
- UL GREENGUARD
- AFRDI Green Tick
- CDPH Standard Method
- CEN
- ISO
- LEVEL
- NaturePlus (GreenCollar)
- PACT
4 credentials, in every rating tool and policy. Clear selection
CEN
Where it earns points or counts, rating tool by rating tool. About CEN
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
No rating tool or policy in Klar Cite names CEN. That is not a statement that none accepts it.
Green Seal
Where it earns points or counts, rating tool by rating tool. About Green Seal
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
IS Rating v2.1Rating tool
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
- Status
- Klar Cite hasn't checked this yet
- Named as
- Green Seal
- Edition named
- Not stated by the tool
- Source
- IS Rating v2.1 · Rso-7 · p. 54
Australian Government ESP PolicyProcurement policy
SESP Template – Products, 'Products have a lower environmental footprint'; Evaluation guidance – Products, 'Evidence of product sustainability'
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Named as
- Green Seal
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- The rule
- third-party “verified” (the ESP Policy’s word)
- ecolabel to ISO 14024
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5
EarthCheck BPDS v5Rating tool
30 Sustainable Materials Selection and Arrangement, 30.1 Green rating/eco-label schemes
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Named as
- Green Seal
- Edition named
- Not stated by the tool
- Level
- 4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
- On what basis
- Not shown under EarthCheck Pty Ltd's terms
- Products
- Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
- Scope
- Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
- The rule
- Not shown under EarthCheck Pty Ltd's terms
- Source
- EarthCheck BPDS v5 · p. 75
LEED v5 BD+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Green Seal
- Edition named
- Not stated by the tool
- Level
- GS-11: 2 · LEED multi-attribute score (max 5)
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- products in GS-11 scope (standard scope not stated by the tool)
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
LEED v5 ID+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Green Seal
- Edition named
- Not stated by the tool
- Level
- GS-11: 2 · LEED multi-attribute score (max 5)
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 ID+C product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 ID+C · MRc4 · p. 5
LEED v4.1 BD+CRating tool
MR Credit(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Green Seal
- Edition named
- GS-11, Edition 4.0
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product
- Products
- paints, coatings, stains and sealers
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
LEED v4.1 ID+CRating tool
MR Credit(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Green Seal
- Edition named
- GS-11, Edition 4.0
- Level
- GS-11, Edition 4.0 · standard and edition
- On what basis
- per product
- Products
- paints, coatings, stains and sealers
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
WELL v2Rating tool
X01 Material Restrictions, Part 3 Restrict Lead, 1: Paints and electronics (paints)
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Named as
- Green Seal
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- Scope
- Paint path only.
- The rule
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X01 (materials/feature/1)
X11 Cleaning Products and Protocols, Part 1 Option 2; Part 2
- Status
- Outside this credit's scope
- Named as
- Green Seal
- Edition named
- GS-42 (Standard for Commercial and Institutional Cleaning Services)
- Products
- Cleaning services and cleaning products
- Scope
- Cleaning services and products, not construction products.
- Source
- WELL v2 · X11 (materials/feature/11)
Not named by: NABERS Embodied Carbon v2.1 (pilot), Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.
Health Product Declaration
Where it earns points or counts, rating tool by rating tool. About Health Product Declaration
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
LEED v5 BD+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Health Product Declaration
- Edition named
- Not stated by the tool
- Level
- pre-checked, 1,000 ppm: 1
- third-party “verified”, 100 ppm: 2
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
LEED v5 ID+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Health Product Declaration
- Edition named
- Not stated by the tool
- Level
- pre-checked, 1,000 ppm: 1
- third-party “verified”, 100 ppm: 2
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 ID+C product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 ID+C · MRc4 · p. 5
LEED v4.1 BD+CRating tool
Counts towards MR Credit
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- per end use product
- Products
- permanently installed products (end use product)
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 101
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
LEED v4.1 ID+CRating tool
Counts towards MR Credit
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- complete HPD, hazards disclosed · disclosure completeness
- On what basis
- end use product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 product · products (credit achievement calculation)
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products (credit achievement calculation)
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
WELL v2Rating tool
X07 Materials Transparency, Part 1 Select Products With Disclosed Ingredients
- Status
- Accepted with conditions
- Named as
- Health Product Declaration
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 25 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 2 Select Products With Enhanced Ingredient Disclosure
- Status
- Accepted with conditions
- Named as
- Health Product Declaration
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 3 Select Products With Third-Party Verified Ingredients
- Status
- Accepted with conditions
- Named as
- Health Product Declaration
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X07 (materials/feature/7)
Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, Australian Government ESP Policy, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.
ISO
Where it earns points or counts, rating tool by rating tool. About ISO
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
No rating tool or policy in Klar Cite names ISO. That is not a statement that none accepts it.