Klar Cite
Menu
ScheduleProduct pagesCredentialsRatings & PolicyCompare standardsSearch
PricingSign in

Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

Australia and New Zealand

International

Which credential?

5 credentials, in every rating tool and policy. Clear selection

CDPH Standard Method

Where it earns points or counts, rating tool by rating tool. About CDPH Standard Method

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

No rating tool or policy in Klar Cite names CDPH Standard Method. That is not a statement that none accepts it.

Read CDPH Standard Method’s requirements →

CEN

Where it earns points or counts, rating tool by rating tool. About CEN

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

No rating tool or policy in Klar Cite names CEN. That is not a statement that none accepts it.

Read CEN’s requirements →

Health Product Declaration

Where it earns points or counts, rating tool by rating tool. About Health Product Declaration

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

LEED v5 BD+CRating tool

  • MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)

    Status
    Accepted with conditions
    Named as
    Health Product Declaration
    Edition named
    Not stated by the tool
    Level
    • pre-checked, 1,000 ppm: 1
    • third-party “verified”, 100 ppm: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

  • MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)

    Status
    Accepted with conditions
    Named as
    Health Product Declaration
    Edition named
    Not stated by the tool
    Level
    • pre-checked, 1,000 ppm: 1
    • third-party “verified”, 100 ppm: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5

LEED v4.1 BD+CRating tool

Counts towards MR Credit

  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    per end use product
    Products
    permanently installed products (end use product)
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 BD+C · MR Credit · p. 101

  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1 product · products counted toward credit achievement
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 BD+C · MR Credit · p. 102

  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1.5 products · products counted toward credit achievement
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 BD+C · MR Credit · p. 102

LEED v4.1 ID+CRating tool

Counts towards MR Credit

  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    complete HPD, hazards disclosed · disclosure completeness
    On what basis
    end use product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 48

  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1 product · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50

  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1.5 products · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50

WELL v2Rating tool

  • X07 Materials Transparency, Part 1 Select Products With Disclosed Ingredients

    Status
    Accepted with conditions
    Named as
    Health Product Declaration
    Edition named
    Not stated by the tool
    Products
    Permanently installed products, furniture, task and floor lamps
    Scope
    Project threshold: at least 25 distinct products.
    Conditions
    Not shown under International WELL Building Institute pbc's terms
    Source
    WELL v2 · X07 (materials/feature/7)

  • X07 Materials Transparency, Part 2 Select Products With Enhanced Ingredient Disclosure

    Status
    Accepted with conditions
    Named as
    Health Product Declaration
    Edition named
    Not stated by the tool
    Products
    Permanently installed products, furniture, task and floor lamps
    Scope
    Project threshold: at least 15 distinct products.
    Conditions
    Not shown under International WELL Building Institute pbc's terms
    Source
    WELL v2 · X07 (materials/feature/7)

  • X07 Materials Transparency, Part 3 Select Products With Third-Party Verified Ingredients

    Status
    Accepted with conditions
    Named as
    Health Product Declaration
    Edition named
    Not stated by the tool
    Products
    Permanently installed products, furniture, task and floor lamps
    Scope
    Project threshold: at least 15 distinct products.
    Conditions
    Not shown under International WELL Building Institute pbc's terms
    Source
    WELL v2 · X07 (materials/feature/7)

Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, Australian Government ESP Policy, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read Health Product Declaration’s requirements →

International EPD System

Where it earns points or counts, rating tool by rating tool. About International EPD System

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

NABERS Embodied Carbon v2.1 (pilot)Rating tool

  • 9.4.3.1 d) Conforming EPDs

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Products
    Any included material with a product-specific EPD
    Scope
    Same scope as the EPD rows
    The rule
    Not shown under New South Wales Government (NABERS)'s terms
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 59

IS Rating v2.1Rating tool

Counts towards Rso-7

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    0.75 · Sustainability Factor (SF)
    On what basis
    Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
    Products
    materials and products (any category)
    Scope
    Not shown under Infrastructure Sustainability Council's terms
    The rule
    Not shown under Infrastructure Sustainability Council's terms
    Source
    IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57, 59

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    0.50 · Sustainability Factor (SF)
    On what basis
    Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
    Products
    materials and products (any category)
    Scope
    Not shown under Infrastructure Sustainability Council's terms
    The rule
    Not shown under Infrastructure Sustainability Council's terms
    Source
    IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57, 59

Australian Government ESP PolicyProcurement policy

  • SESP Template – Products, 'Products have a lower environmental footprint'; Evaluation guidance – Products, 'Evidence of product sustainability'

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Products
    FFE, ICT Goods, Textiles
    Scope
    The rule is on the EPD; class membership is on the programme.
    The rule
    • EPD “verified” (the ESP Policy’s word) by a third party
    • EPD to ISO 14025
    Source
    Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5, 6

Homestar v5Rating tool

  • EN3 Sustainable Materials, EPD industry-wide; Additional Guidance on EPDs

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Level
    0.75 point · points per material category
    On what basis
    industry-wide EPD format
    Products
    not stated by the tool
    The rule
    Not shown under New Zealand Green Building Council's terms
    Source
    Homestar v5 · EN3 · EN3 p. 10, 12

  • EN3 Sustainable Materials, EPD product-specific; Additional Guidance on EPDs

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Level
    1.25 points · points per material category
    On what basis
    product-specific EPD format
    Products
    not stated by the tool
    The rule
    • product-specific EPD that Homestar calls “third-party verified”
    • independently audited
    • cradle-to-gate scope as a minimum
    Source
    Homestar v5 · EN3 · EN3 p. 10, 12

Homestar v4.1, supersededRating tool

  • MAT-1 Table 21 Environmental product Declaration; industry-wide EPD

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Level
    1 · MAT-1 points per material category
    On what basis
    Industry wide EPD
    Products
    Any MAT-1 material category
    The rule
    • industry-wide EPD
    • independently audited
    • cradle-to-gate scope at minimum
    • manufacturer recognised as a participant in the EPD
    Source
    Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7

  • MAT-1 Table 21 Environmental product Declaration; product-specific EPD

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Level
    1.5 · MAT-1 points per material category
    On what basis
    Product Specific EPD
    Products
    Any MAT-1 material category
    The rule
    • product-specific EPD
    • independently audited
    • cradle-to-gate scope at minimum
    Source
    Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7

EnviroDevelopment v4Rating tool

  • Materials 4.2.5(b), (e), (f) Structure: EPD to EN15804 options for non-structural steel, structural timber and bricks. All ten typology sections.

    Status
    Accepted as a kind of credential
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Products
    non-structural steel; structural timber; bricks
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

  • Materials 4.2.9 Alternative compliance (4.2.8 in Commercial). All ten typology sections.

    Status
    Accepted as a kind of credential
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Products
    procured materials (any)
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

EarthCheck BPDS v5Rating tool

  • 30.1 Guidance: fallback where no formal rating is available for a material

    Status
    Accepted as an owner ruling
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Not shown under EarthCheck Pty Ltd's terms
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75

LEED v5 BD+CRating tool

  • MRc2(credit title not shown under U.S. Green Building Council, Inc.'s terms)

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Level
    1–3 POINTS · points
    On what basis
    project GWP reduction against industry averages (Table 1)
    Products
    structure, enclosure and hardscape materials
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc2 · p. 2, 3

  • MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

  • MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5

LEED v4.1 BD+CRating tool

Counts towards MR Credit

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    1.5 products · products counted toward credit achievement
    On what basis
    per permanently installed product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 BD+C · MR Credit · p. 96

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    one whole product · products counted toward credit achievement
    On what basis
    per permanently installed product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 BD+C · MR Credit · p. 96

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    ½ product · products counted toward credit achievement
    On what basis
    per product with an action plan
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
    Source
    LEED v4.1 BD+C · MR Credit · p. 97

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    1 product · products counted toward credit achievement
    On what basis
    per product with an optimization report
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
    Source
    LEED v4.1 BD+C · MR Credit · p. 97

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    1.5 products · products counted toward credit achievement
    On what basis
    per product with an optimization report
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
    Source
    LEED v4.1 BD+C · MR Credit · p. 97

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    2 products · products counted toward credit achievement
    On what basis
    per product with an optimization report
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
    Source
    LEED v4.1 BD+C · MR Credit · p. 97

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    1.5 products · products counted toward credit achievement
    On what basis
    per product
    Products
    products under the Furniture and Medical Furnishings credit
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 BD+C · MR Credit · p. 106

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    one whole product · products counted toward credit achievement
    On what basis
    per product
    Products
    products under the Furniture and Medical Furnishings credit
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 BD+C · MR Credit · p. 106

LEED v4.1 ID+CRating tool

Counts towards MR Credit

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    valued as one whole product · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 44

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    valued as 1.5 products · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 44

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    ½ product; 1 product; 1.5 products; 2 products · products (credit achievement calculation)
    On what basis
    per product, by report type
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
    Source
    LEED v4.1 ID+C · MR Credit · p. 45

BREEAM International NC v7.1Rating tool

  • Mat 02 Environmental product declarations, Table 74 Validity

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    Level
    0.5 (EPD for more than one product in the same product category, more than one manufacturer) / 0.75 (more than one product, single manufacturer) / 1.5 (single product or colour/pattern variations, single manufacturer) · EPD points
    On what basis
    Per EPD, by EPD type (0.5 / 0.75 / 1.5, see EPD rows)
    Products
    Construction products
    The rule
    • EPD unexpired at the point of specification
    • Product installed in the building by the end of construction
    • For products under the Construction Product Regulations: product category rules based on BS EN 15804
    • EPD not pending verification at the time of specification (CN2)
    Source
    BREEAM International NC v7.1 · Mat 02 · p. 304

BREEAM International NC v6.0, supersededRating tool

  • Mat 01 Life cycle impacts, criterion 5; CN3.2; Relevant definitions

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    On what basis
    per product covered by an EPD that BREEAM calls “verified”
    Products
    construction products, classified by Mat 03 Table 46 material categories
    Scope
    Only two EPDs per classification group may be counted.
    The rule
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279

  • Mat 01 Life cycle impacts, exemplary level criterion 7; CN3.2

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    International EPD System
    Edition named
    Not stated by the tool
    On what basis
    per product covered by a manufacturer specific EPD that BREEAM calls “verified”
    Products
    construction products, classified by Mat 03 Table 46 material categories
    Scope
    Exemplary level only. Only two EPDs per classification group may be counted.
    The rule
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279

Not named by: WELL v2.

Read International EPD System’s requirements →

Sustainable Forestry Initiative

Where it earns points or counts, rating tool by rating tool. About Sustainable Forestry Initiative

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

IS Rating v2.1Rating tool

  • Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)

    Status
    Klar Cite hasn't checked this yet
    Named as
    Sustainable Forestry Initiative
    Edition named
    Not stated by the tool
    Source
    IS Rating v2.1 · Rso-7 · p. 54

LEED v5 BD+CRating tool

  • MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)

    Status
    Accepted with conditions
    Named as
    Sustainable Forestry Initiative
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • 100% recycled: 2
    • forestry and recycled: 2
    • forestry: 3
    • 100% certified forest: 4
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-004: the tool reads two ways (p. 15 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026); SC-005: the tool reads two ways (p. 19, 20 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
    Source
    LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

  • MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)

    Status
    Accepted with conditions
    Named as
    Sustainable Forestry Initiative
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • 100% recycled: 2
    • forestry and recycled: 2
    • forestry: 3
    • 100% certified forest: 4
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-004: the tool reads two ways (p. 15 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026); SC-005: the tool reads two ways (p. 19, 20 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
    Source
    LEED v5 ID+C · MRc4 · p. 5

BREEAM International NC v7.1Rating tool

  • Man 03 Responsible construction, legally harvested and traded timber evidence table

    Status
    Accepted
    Named as
    Sustainable Forestry Initiative
    Edition named
    Not stated by the tool
    Level
    Yes / Yes · Demonstrates timber is legally harvested / Demonstrates timber is legally traded
    On what basis
    Evidence type for the legally harvested and traded timber requirement
    Products
    Timber
    Scope
    Applies only to new formwork, scaffolding boards or other new temporary site timber purchased for the project. Reused timber that can be “verified” (BREEAM’s word) is excluded.
    Source
    BREEAM International NC v7.1 · p. 66

  • Mat 03 Responsible sourcing, GN18 Table 1

    Status
    Accepted with conditions
    Named as
    'SFI Certified Chain of Custody, Promoting Sustainable Forestry'
    Edition named
    Not stated by the tool
    Level
    6 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per label plus additional requirement, used in the Mat 03 calculator tool
    Products
    not stated by the tool
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3

  • Mat 03 Responsible sourcing, GN18 Table 1

    Status
    Accepted with conditions
    Named as
    'SFI Certified Chain of Custody, Promoting Sustainable Forestry'
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per label plus additional requirement, used in the Mat 03 calculator tool
    Products
    not stated by the tool
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3

BREEAM International NC v6.0, supersededRating tool

Counts towards Mat 03 criterion 5 (Step 1.3); GN18 Table 1

  • 'SFI Certified Chain of Custody, Promoting Sustainable Forestry'

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    6 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    timber and timber-based products
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 3 (GN18)

  • 'SFI Certified Chain of Custody, Promoting Sustainable Forestry'

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    timber and timber-based products
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 3 (GN18)

Not named by: NABERS Embodied Carbon v2.1 (pilot), Australian Government ESP Policy, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2.

Read Sustainable Forestry Initiative’s requirements →