Ratings & Policy
Find where a product credential earns points or counts, and what each rating tool or policy accepts.
Pick any rating tools or policies and any credentials. The results narrow to what you pick.
Australia and New Zealand
Which credential?
- Aluminium Stewardship Initiative
- BEP PVC
- BES 6001
- Blue Angel
- CARES Sustainable Constructional Steel
- Carpet Institute
- Climate Active
- Concrete Sustainability Council
- Cradle to Cradle Certified
- Declare
- Eco Choice Aotearoa
- EMICODE
- EPD
- EPD Australasia
- EU Ecolabel
- FSC
- GECA
- Global GreenTag
- Global Organic Textile Standard
- Global Responsible Textile Standard
- Green Seal
- Health Product Declaration
- International EPD System
- Living Product Challenge
- Nordic Swan
- PEFC
- Product Carbon Footprint
- Responsible Steel
- Responsible Wood
- SCS Standards
- Steel Sustainability Australia
- Sustainable Forestry Initiative
- UL GREENGUARD
- AFRDI Green Tick
- CDPH Standard Method
- CEN
- ISO
- LEVEL
- NaturePlus (GreenCollar)
- PACT
What NABERS Embodied Carbon v2.1 (pilot), Australian Government ESP Policy and LEED v4.1 ID+C accept. Pick credentials to narrow it. Clear selection
NABERS Embodied Carbon v2.1 (pilot)
Rating tool · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
9.4.2 a); 9.4.3.1 Conforming EPDs; 9.4.3.2; 9.4.3.3; 9.4.3.5 (product-specific emission factor, specific-product EPD)
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017
- On what basis
- GWPT, modules A1-A3
- Products
- Any included material with a product-specific EPD
- Scope
- Overrides the default emission factor for that material only; cannot be used for similar products from other manufacturers; modules A1-A3 only
- Conditions
- Not shown under New South Wales Government (NABERS)'s terms
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.2 a); 9.4.4.1 Conforming carbon footprint declarations; 9.4.4.2
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
ISO 14067 or PAS 2050 (Related documents list ISO 14067:2018)
- Status
- Accepted with conditions
- Edition named
- Related documents list ISO 14067:2018
- On what basis
- GHG total emissions, modules A1-A3, entered as GWPT
- Products
- Any included material
- Scope
- Overrides the default emission factor for that material; modules A1-A3
- Conditions
- follows ISO 14067 or PAS 2050
- system boundary matches the EN 15804 or ISO 21930 boundary
- names the material by unique product name or code
- independently “verified” (NABERS’s word) by a verifier not involved in defining the scope or conducting the LCA study
- dated within five years before the last delivery of the product to site
- unit matches the unit selected in the input form
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 9, 53, 61, 62
9.4.2 a); 9.4.5.1 Conforming Climate Active Public Disclosure Statements; 9.4.5.2
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
Climate Active Product Certification (Public Disclosure Statement)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- GHG total emissions, modules A1-A3, entered as GWPT
- Products
- Any included material
- Scope
- Product-level certification only; other Climate Active certifications are not considered (definition)
- Conditions
- Not shown under New South Wales Government (NABERS)'s terms
- Reads two ways
- SC-006: the tool reads two ways (p. 53 and p. 62); this row follows p. 62
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 12, 53, 62
9.4.2 b); 9.4.3.1 f); 9.4.3.4 Industry average EPDs
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017 (industry average EPD)
- On what basis
- Worst-case GWPT, modules A1-A3 (average multiplied by maximum variation)
- Products
- Materials covered by an industry average EPD
- Scope
- Second priority after product-specific data (9.4.2 b))
- Conditions
- Not shown under New South Wales Government (NABERS)'s terms
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.3.1 Conforming EPDs (example)
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- GWPT, modules A1-A3
- Products
- Any included material with a product-specific EPD
- Scope
- Same scope as the EPD rows (emission factor, industry average, stored carbon)
- Conditions
- each EPD “meets” (NABERS’s word) the 9.4.3.1 conditions
- use the EPD version valid at the time of delivery to site, obtained from the manufacturer if the online version is newer
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 59
9.4.3.1 d) Conforming EPDs
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Products
- Any included material with a product-specific EPD
- Scope
- Same scope as the EPD rows
- The rule
- Not shown under New South Wales Government (NABERS)'s terms
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 59
9.4.3.5; 10.4.1; 10.4.2.3 (stored biogenic carbon from older EPDs)
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- EN 15804+A1 and ISO 21930 (as printed)
- On what basis
- Stored biogenic carbon in product
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only
- Conditions
- EPD conforms to Section 9.4.3.1
- timber or paper material only
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a stored carbon value given in text or a diagram may be used only if the EPD clearly states it is stored in the product
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- if unsure or not reported, estimate using 10.4.3
- GWPB must not be used
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 61, 68, 69, 94
9.7.2 Vertical transport services (lift EPDs)
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Modules A1-A3
- Products
- Lifts
- Scope
- Replaces default vertical transport emission factors
- Conditions
- conforming EPD as per Section 9.4
- multiply the per-tkm factor by the total transportation performance over the service life per ISO 25745-2
- where several usage categories are published, select the most appropriate one as detailed in the EPD and confirmed by the lift manufacturer or developer
- enter the mass of the lift
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 65
10.3 Claiming carbon neutral materials; 14.8.1
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
Climate Active Product Certification (Public Disclosure Statement)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Carbon offsets, modules A1-A3
- Products
- Individual building materials
- Scope
- Carbon Removal Indicator only; does not affect the star rating or emissions intensity
- Conditions
- a product-specific emission factor for the Climate Active certified product is used per 9.4.5
- individual building materials only
- covers extraction, processing and manufacture only (A1-A3)
- public disclosure statement for the year the material was purchased
- as-built evidence that the specific material was used
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 67, 94
10.4.1; 10.4.2.1; 10.4.2.3; 14.8.2 (stored biogenic carbon in timber, Carbon Removal Indicator)
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- EN 15804+A2:2019
- On what basis
- Stored biogenic carbon in product (BCC-prod)
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only; does not affect the star rating or emissions intensity; not for repurposed materials (10.6) or non-timber biomass (10.5)
- Conditions
- timber or paper material only
- applies when a product-specific emission factor per Section 9.4 (conforming EPD) is used
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a statement that at least 95 % of the timber is certified is acceptable
- use BCC-prod; exclude BCC-pack
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- GWPB must not be used to find stored biogenic carbon
- if stored carbon cannot be found, use the default estimate in 10.4.3
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 69, 94
10.4.1; 10.4.4 (default emission factor); 14.8.2
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Timber and paper materials
- Scope
- Stored biogenic carbon in the Carbon Removal Indicator only; not repurposed materials; non-timber biomass is referred to the National Administrator (10.5)
- Conditions
- timber or paper material only
- retain FSC certification details including licence number
- where an EPD states the certified share, at least 95 % is acceptable
- with a default emission factor, select 'sustainable forest certified' in the input form
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Timber and paper materials
- Scope
- Stored biogenic carbon in the Carbon Removal Indicator only
- Conditions
- timber or paper material only
- Responsible Wood certification as part of PEFC
- retain certification details including licence number
- where an EPD states the certified share, at least 95 % is acceptable
- with a default emission factor, select 'sustainable forest certified' in the input form
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94
10.4.1; 10.4.4; 14.8.2
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Timber and paper materials
- Scope
- Stored biogenic carbon in the Carbon Removal Indicator only
- Conditions
- timber or paper material only
- certified by Responsible Wood as part of PEFC (per 10.4.1)
- retain certification details including licence number
- where an EPD states the certified share, at least 95 % is acceptable
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94
10.4.2.1; 10.4.2.4 Finding stored biogenic carbon in a carbon footprint; 14.8.2
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- ISO 14067 or PAS 2050
- On what basis
- GHG biogenic removals
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only
- Conditions
- carbon footprint conforms to 9.4.4.1 (“compliant” (NABERS’s word) with ISO 14067 or PAS 2050; system boundary “equivalent” to EN 15804 or ISO 21930; refers directly to the material by unique product name or code; independently “verified”, verifier not involved in defining scope or conducting the LCA; dated within five years before the last delivery of the product to site)
- timber or paper material only
- confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- use the GHG biogenic removals value
- if not reported separately, estimate using 10.4.3
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 70, 94
10.4.2.1; 10.4.2.5 Finding stored biogenic carbon in a Climate Active Public Disclosure Statement; 10.4.3
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
Climate Active Product Certification (Public Disclosure Statement)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Estimated stored biogenic carbon (Formula 10.4.3a)
- Products
- Timber products
- Scope
- Carbon Removal Indicator only
- Conditions
- timber or paper material only
- the certification confirms the material is from a sustainably managed source
- stored carbon must be calculated with the 10.4.3 method
- water content, moisture content or dry-matter carbon content from the statement are used where published, otherwise the default assumptions apply
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 70, 71
11.4.4 Source location as defined by an EPD; 14.9.1
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Source location for transport emissions
- Products
- Materials entered with an EPD
- Scope
- Transport emissions (A4) source location only
- Conditions
- source location is the manufacturing exit gate stated in the EPD
- where the EPD lists several production sites, use the site closest to the rated premises unless the actual site used is known
- not available for default assemblies
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 74, 95
12.3.2.2 Standard for acceptable data (construction and commissioning energy); 14.10.1
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
Climate Active Building Certification (Public Disclosure Statement)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Site construction and commissioning energy use
- Products
- Construction and commissioning energy (not a product)
- Scope
- Evidence for replacing the default construction energy rate only
- Conditions
- clearly shows the amount of energy use
- clearly shows the date of sale or time period of use
- record from a third party
- for construction and commissioning energy only (12.3.2.2), not for material emissions, where only product certifications count (p. 12)
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 77, 95
Australian Government ESP Policy
Procurement policy · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Evaluation guidance – Products, 'Evidence of product sustainability' and 'Environmental Product Declarations'; SESP Template – Products, 'Products have a lower environmental footprint'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- ISO 14025 (or EN 15804 for construction products)
- On what basis
- named way to verify; 'Gold standard verification includes third-party EPDs' (p. 5)
- Products
- FFE, ICT Goods, Textiles
- Scope
- The tool says EPDs do not show environmental preferability unless compared with other robust EPDs (p. 5).
- Conditions
- Not shown under Commonwealth of Australia (Department of Finance)'s terms
- Source
- Australian Government ESP Policy · p. 5, 6, 16, 17; SESP Template (unpaginated)
Evaluation guidance – Products, 'Evidence of product sustainability' and 'Product Carbon Footprint'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- ISO 14067
- On what basis
- listed as a way to verify sustainability
- Products
- FFE, ICT Goods, Textiles
- Scope
- Not named as gold standard (p. 5). The tool says a product with an EPD would be preferable (p. 6).
- Conditions
- “verified” (the ESP Policy’s word) by a third party
- measured to ISO 14067
- product footprint, not organisational footprint (not ISO 14064-1)
- Source
- Australian Government ESP Policy · p. 5, 6, 16
Evaluation guidance – Products, Table 1
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
Carbon Neutral (printed as 'Climate Active Carbon Neutral')
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- All
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Climate only.
- Conditions
- Climate Active Carbon Neutral certification
- certification held for the product
- Source
- Australian Government ESP Policy · p. 9
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Platinum to Bronze · tiered rating
- On what basis
- tiers printed with no minimum stated; Platinum described as world's best practice
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Circularity, Climate.
- Conditions
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 9
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- FFE products only
- Source
- Australian Government ESP Policy · p. 9
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- FFE products only
- Source
- Australian Government ESP Policy · p. 9
Green Rate (printed 'Global Green Tag Green Rate')
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- described as multi-level; no minimum stated
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
- Conditions
- GreenRate certification
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 10
HealthRATE (printed 'Global Green Tag HealthRATE')
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- described as tiered; no minimum stated
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment only.
- Conditions
- HealthRATE certification
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 10
LCA Rate (printed 'Global Green Tag LCA Rate')
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
- Conditions
- LCARate certification
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 10
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
- Conditions
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 11
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- FFE products only
- Source
- Australian Government ESP Policy · p. 11
Evaluation guidance – Products, Table 1 (row 'FSC (Forest Stewardship Council)')
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Recycled; 100% sustainable; Mixed (sustainable/recycled) · certification option
- On what basis
- 3 options of certification listed; none preferred
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Circularity.
- Conditions
- FFE products only
- one of the three certification options: Recycled, 100% sustainable, Mixed
- Source
- Australian Government ESP Policy · p. 10
Evaluation guidance – Products, Table 1 (row 'GECA (Good Environmental Choice Australia)')
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
- Conditions
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 10
Evaluation guidance – Products, Table 1 (row 'Global Organic Textiles Standard (GOTS)')
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
Global Organic Textile Standard
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- Textiles products only
- Source
- Australian Government ESP Policy · p. 10
Evaluation guidance – Products, Table 1: Examples of good practice product ecolabels and sustainability certifications
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- All
- Scope
- Table 1 gives examples and is not exhaustive (p. 5). Focus areas printed: Environment, Circularity, Climate.
- Source
- Australian Government ESP Policy · p. 9
Evaluation guidance – Products, Table 3 Product sustainability considerations, 'Goods contain recycled content/recycled materials are used'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- FSC Recycled label · label
- On what basis
- named as an ecolabel that certifies recycled content
- Products
- FFE, ICT Goods, Textiles (Table 3 covers ESP products)
- Scope
- Recycled content consideration only; given as an example ('e.g.').
- Conditions
- FSC Recycled label only
- used as evidence of recycled content
- Source
- Australian Government ESP Policy · p. 17
Evaluation guidance – Products, Table 3, 'Goods contain recycled content/recycled materials are used'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
GECA Recycled Products standard
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- GECA Recycled Products standard · standard
- On what basis
- named as an ecolabel that certifies recycled content
- Products
- FFE, ICT Goods, Textiles (Table 3 covers ESP products)
- Scope
- Recycled content consideration only; given as an example ('e.g.').
- Conditions
- certification to the GECA Recycled Products standard
- used as evidence of recycled content
- Source
- Australian Government ESP Policy · p. 17
SESP Guidance for tender evaluation – Construction Services, 'Evidence'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- on the indicative list of evidence
- Products
- Construction materials
- Scope
- Indicative evidence list. Evaluators are told not all businesses can obtain EPDs.
- Conditions
- applicable to the region in which the procurement is delivered
- Source
- Australian Government ESP Policy · p. 5
SESP Template – Products, 'Products have a lower environmental footprint'; Evaluation guidance – Products, 'Evidence of product sustainability'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- Scope
- The rule is on the EPD; class membership is on the programme.
- The rule
- EPD “verified” (the ESP Policy’s word) by a third party
- EPD to ISO 14025
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5, 6
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- The rule
- third-party “verified” (the ESP Policy’s word)
- ecolabel to ISO 14024
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- The rule
- third-party “verified” (the ESP Policy’s word)
- ecolabel to ISO 14024
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- Scope
- The rule is on the EPD; class membership is on the programme.
- The rule
- EPD “verified” (the ESP Policy’s word) by a third party
- EPD to ISO 14025
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5, 6
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- The rule
- third-party “verified” (the ESP Policy’s word)
- ecolabel to ISO 14024
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5
LEED v4.1 ID+C
Rating tool · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
MR Credit
LEED v4.1 ID+C · LEED v4.1 ID+C (no date printed on the supplied pages; file name gives v4.1, 2024-02-01)
- Status
- Accepted with conditions
- Edition named
- v3
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 45
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
- Source
- LEED v4.1 ID+C · MR Credit · p. 45
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
- Source
- LEED v4.1 ID+C · MR Credit · p. 45
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 46
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
- Status
- Accepted with conditions
- Edition named
- GS-11, Edition 4.0
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- paints, coatings, stains and sealers
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
- Source
- LEED v4.1 ID+C · MR Credit · p. 45
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50