Ratings & Policy
Find where a product credential earns points or counts, and what each rating tool or policy accepts.
Pick any rating tools or policies and any credentials. The results narrow to what you pick.
Australia and New Zealand
Which credential?
- Aluminium Stewardship Initiative
- BEP PVC
- BES 6001
- Blue Angel
- CARES Sustainable Constructional Steel
- Carpet Institute
- Climate Active
- Concrete Sustainability Council
- Cradle to Cradle Certified
- Declare
- Eco Choice Aotearoa
- EMICODE
- EPD
- EPD Australasia
- EU Ecolabel
- FSC
- GECA
- Global GreenTag
- Global Organic Textile Standard
- Global Responsible Textile Standard
- Green Seal
- Health Product Declaration
- International EPD System
- Living Product Challenge
- Nordic Swan
- PEFC
- Product Carbon Footprint
- Responsible Steel
- Responsible Wood
- SCS Standards
- Steel Sustainability Australia
- Sustainable Forestry Initiative
- UL GREENGUARD
- AFRDI Green Tick
- CDPH Standard Method
- CEN
- ISO
- LEVEL
- NaturePlus (GreenCollar)
- PACT
What NABERS Embodied Carbon v2.1 (pilot), EnviroDevelopment v4, WELL v2 and BREEAM International NC v7.1 accept. Pick credentials to narrow it. Clear selection
NABERS Embodied Carbon v2.1 (pilot)
Rating tool · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
9.4.2 a); 9.4.3.1 Conforming EPDs; 9.4.3.2; 9.4.3.3; 9.4.3.5 (product-specific emission factor, specific-product EPD)
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017
- On what basis
- GWPT, modules A1-A3
- Products
- Any included material with a product-specific EPD
- Scope
- Overrides the default emission factor for that material only; cannot be used for similar products from other manufacturers; modules A1-A3 only
- Conditions
- Not shown under New South Wales Government (NABERS)'s terms
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.2 a); 9.4.4.1 Conforming carbon footprint declarations; 9.4.4.2
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
ISO 14067 or PAS 2050 (Related documents list ISO 14067:2018)
- Status
- Accepted with conditions
- Edition named
- Related documents list ISO 14067:2018
- On what basis
- GHG total emissions, modules A1-A3, entered as GWPT
- Products
- Any included material
- Scope
- Overrides the default emission factor for that material; modules A1-A3
- Conditions
- follows ISO 14067 or PAS 2050
- system boundary matches the EN 15804 or ISO 21930 boundary
- names the material by unique product name or code
- independently “verified” (NABERS’s word) by a verifier not involved in defining the scope or conducting the LCA study
- dated within five years before the last delivery of the product to site
- unit matches the unit selected in the input form
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 9, 53, 61, 62
9.4.2 a); 9.4.5.1 Conforming Climate Active Public Disclosure Statements; 9.4.5.2
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
Climate Active Product Certification (Public Disclosure Statement)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- GHG total emissions, modules A1-A3, entered as GWPT
- Products
- Any included material
- Scope
- Product-level certification only; other Climate Active certifications are not considered (definition)
- Conditions
- Not shown under New South Wales Government (NABERS)'s terms
- Reads two ways
- SC-006: the tool reads two ways (p. 53 and p. 62); this row follows p. 62
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 12, 53, 62
9.4.2 b); 9.4.3.1 f); 9.4.3.4 Industry average EPDs
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017 (industry average EPD)
- On what basis
- Worst-case GWPT, modules A1-A3 (average multiplied by maximum variation)
- Products
- Materials covered by an industry average EPD
- Scope
- Second priority after product-specific data (9.4.2 b))
- Conditions
- Not shown under New South Wales Government (NABERS)'s terms
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.3.1 Conforming EPDs (example)
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- GWPT, modules A1-A3
- Products
- Any included material with a product-specific EPD
- Scope
- Same scope as the EPD rows (emission factor, industry average, stored carbon)
- Conditions
- each EPD “meets” (NABERS’s word) the 9.4.3.1 conditions
- use the EPD version valid at the time of delivery to site, obtained from the manufacturer if the online version is newer
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 59
9.4.3.1 d) Conforming EPDs
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Products
- Any included material with a product-specific EPD
- Scope
- Same scope as the EPD rows
- The rule
- Not shown under New South Wales Government (NABERS)'s terms
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 59
9.4.3.5; 10.4.1; 10.4.2.3 (stored biogenic carbon from older EPDs)
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- EN 15804+A1 and ISO 21930 (as printed)
- On what basis
- Stored biogenic carbon in product
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only
- Conditions
- EPD conforms to Section 9.4.3.1
- timber or paper material only
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a stored carbon value given in text or a diagram may be used only if the EPD clearly states it is stored in the product
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- if unsure or not reported, estimate using 10.4.3
- GWPB must not be used
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 61, 68, 69, 94
9.7.2 Vertical transport services (lift EPDs)
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Modules A1-A3
- Products
- Lifts
- Scope
- Replaces default vertical transport emission factors
- Conditions
- conforming EPD as per Section 9.4
- multiply the per-tkm factor by the total transportation performance over the service life per ISO 25745-2
- where several usage categories are published, select the most appropriate one as detailed in the EPD and confirmed by the lift manufacturer or developer
- enter the mass of the lift
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 65
10.3 Claiming carbon neutral materials; 14.8.1
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
Climate Active Product Certification (Public Disclosure Statement)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Carbon offsets, modules A1-A3
- Products
- Individual building materials
- Scope
- Carbon Removal Indicator only; does not affect the star rating or emissions intensity
- Conditions
- a product-specific emission factor for the Climate Active certified product is used per 9.4.5
- individual building materials only
- covers extraction, processing and manufacture only (A1-A3)
- public disclosure statement for the year the material was purchased
- as-built evidence that the specific material was used
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 67, 94
10.4.1; 10.4.2.1; 10.4.2.3; 14.8.2 (stored biogenic carbon in timber, Carbon Removal Indicator)
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- EN 15804+A2:2019
- On what basis
- Stored biogenic carbon in product (BCC-prod)
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only; does not affect the star rating or emissions intensity; not for repurposed materials (10.6) or non-timber biomass (10.5)
- Conditions
- timber or paper material only
- applies when a product-specific emission factor per Section 9.4 (conforming EPD) is used
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a statement that at least 95 % of the timber is certified is acceptable
- use BCC-prod; exclude BCC-pack
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- GWPB must not be used to find stored biogenic carbon
- if stored carbon cannot be found, use the default estimate in 10.4.3
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 69, 94
10.4.1; 10.4.4 (default emission factor); 14.8.2
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Timber and paper materials
- Scope
- Stored biogenic carbon in the Carbon Removal Indicator only; not repurposed materials; non-timber biomass is referred to the National Administrator (10.5)
- Conditions
- timber or paper material only
- retain FSC certification details including licence number
- where an EPD states the certified share, at least 95 % is acceptable
- with a default emission factor, select 'sustainable forest certified' in the input form
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Timber and paper materials
- Scope
- Stored biogenic carbon in the Carbon Removal Indicator only
- Conditions
- timber or paper material only
- Responsible Wood certification as part of PEFC
- retain certification details including licence number
- where an EPD states the certified share, at least 95 % is acceptable
- with a default emission factor, select 'sustainable forest certified' in the input form
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94
10.4.1; 10.4.4; 14.8.2
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Timber and paper materials
- Scope
- Stored biogenic carbon in the Carbon Removal Indicator only
- Conditions
- timber or paper material only
- certified by Responsible Wood as part of PEFC (per 10.4.1)
- retain certification details including licence number
- where an EPD states the certified share, at least 95 % is acceptable
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94
10.4.2.1; 10.4.2.4 Finding stored biogenic carbon in a carbon footprint; 14.8.2
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- ISO 14067 or PAS 2050
- On what basis
- GHG biogenic removals
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only
- Conditions
- carbon footprint conforms to 9.4.4.1 (“compliant” (NABERS’s word) with ISO 14067 or PAS 2050; system boundary “equivalent” to EN 15804 or ISO 21930; refers directly to the material by unique product name or code; independently “verified”, verifier not involved in defining scope or conducting the LCA; dated within five years before the last delivery of the product to site)
- timber or paper material only
- confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- use the GHG biogenic removals value
- if not reported separately, estimate using 10.4.3
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 70, 94
10.4.2.1; 10.4.2.5 Finding stored biogenic carbon in a Climate Active Public Disclosure Statement; 10.4.3
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
Climate Active Product Certification (Public Disclosure Statement)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Estimated stored biogenic carbon (Formula 10.4.3a)
- Products
- Timber products
- Scope
- Carbon Removal Indicator only
- Conditions
- timber or paper material only
- the certification confirms the material is from a sustainably managed source
- stored carbon must be calculated with the 10.4.3 method
- water content, moisture content or dry-matter carbon content from the statement are used where published, otherwise the default assumptions apply
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 70, 71
11.4.4 Source location as defined by an EPD; 14.9.1
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Source location for transport emissions
- Products
- Materials entered with an EPD
- Scope
- Transport emissions (A4) source location only
- Conditions
- source location is the manufacturing exit gate stated in the EPD
- where the EPD lists several production sites, use the site closest to the rated premises unless the actual site used is known
- not available for default assemblies
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 74, 95
12.3.2.2 Standard for acceptable data (construction and commissioning energy); 14.10.1
NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)
Climate Active Building Certification (Public Disclosure Statement)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Site construction and commissioning energy use
- Products
- Construction and commissioning energy (not a product)
- Scope
- Evidence for replacing the default construction energy rate only
- Conditions
- clearly shows the amount of energy use
- clearly shows the date of sale or time period of use
- record from a third party
- for construction and commissioning energy only (12.3.2.2), not for material emissions, where only product certifications count (p. 12)
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 77, 95
EnviroDevelopment v4
Rating tool · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Materials 4.2.5(b) Structure: non-structural steel. Same clause in all ten typology sections: Masterplanned Communities, Residential Subdivision, Seniors Living, Multi-Unit Residential, Mixed Use, Industrial, Retail, Education, Health and Aged Care, Commercial
EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- non-structural steel
- Scope
- Built form structure option. It is an alternative to recycled content ≥15%. It applies to 80% of non-structural steel, a project quantity.
- Conditions
- EPD to EN15804
- product is non-structural steel
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(b), (e), (f) Structure: EPD to EN15804 options for non-structural steel, structural timber and bricks. All ten typology sections.
EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages
- Status
- Accepted as a kind of credential
- Edition named
- Not stated by the tool
- Products
- non-structural steel; structural timber; bricks
- The rule
- Not recorded
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
- Status
- Accepted as a kind of credential
- Edition named
- Not stated by the tool
- Products
- non-structural steel; structural timber; bricks
- The rule
- Not recorded
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. All ten typology sections.
EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- certified
- On what basis
- certified to FSC (Forest Stewardship Council) standard
- Products
- structural timber
- Scope
- Built form structure option. It is an alternative to PEFC/AFS or an EPD to EN15804.
- Conditions
- product is structural timber
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- certified
- On what basis
- certified to a PEFC standard
- Products
- structural timber
- Scope
- Built form structure option. It is an alternative to FSC or an EPD to EN15804.
- Conditions
- product is structural timber
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- certified
- On what basis
- certified to AFS (Australian Forestry Standard), named as an example of a PEFC standard
- Products
- structural timber
- Scope
- Built form structure option.
- Conditions
- product is structural timber
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307, 317
Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. Same treatment in all ten typology sections.
EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- structural timber
- Scope
- Built form structure option. It is an alternative or addition to PEFC/AFS/FSC certification.
- Conditions
- EPD to EN15804
- product is structural timber
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(f) Structure: bricks. Lettered 4.2.5(e) in Residential Subdivision. Same treatment in all ten typology sections.
EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- bricks
- Scope
- Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
- Conditions
- EPD to EN15804
- product is bricks
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.6(a) Envelope / linings: timber window frames. All ten typology sections.
EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- accredited/endorsed
- Products
- timber window frames
- Scope
- Building envelope option.
- Conditions
- product is timber window frames
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- accredited/endorsed
- Products
- timber window frames
- Scope
- Building envelope option.
- Conditions
- product is timber window frames
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- accredited/endorsed
- On what basis
- AFS given as an example of PEFC
- Products
- timber window frames
- Scope
- Building envelope option.
- Conditions
- product is timber window frames
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307
Materials 4.2.8(b) Furniture, fixtures, equipment and finishes: carpet. Lettered 4.2.8(e) in Mixed Use. All ten typology sections.
EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- level 2 or greater · level
- On what basis
- Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
- Products
- carpet
- Scope
- Furniture, fixtures, equipment and finishes option. Minimum 50% of the carpet is a project threshold.
- Conditions
- Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307).
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307
Materials 4.2.8(c) Furniture, fixtures, equipment and finishes: joinery. Lettered 4.2.8(f) in Mixed Use. All ten typology sections.
EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- certified/endorsed
- Products
- joinery
- Scope
- Furniture, fixtures, equipment and finishes option.
- Conditions
- product is joinery
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- certified/endorsed
- Products
- joinery
- Scope
- Furniture, fixtures, equipment and finishes option.
- Conditions
- product is joinery
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- certified/endorsed
- On what basis
- AFS given as an example of PEFC
- Products
- joinery
- Scope
- Furniture, fixtures, equipment and finishes option.
- Conditions
- product is joinery
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307
Materials 4.2.9 Alternative compliance (4.2.8 in Commercial). All ten typology sections.
EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages
- Status
- Accepted as a kind of credential
- Edition named
- Not stated by the tool
- Products
- procured materials (any)
- The rule
- Not recorded
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308
- Status
- Accepted as a kind of credential
- Edition named
- Not stated by the tool
- Products
- procured materials (any)
- The rule
- Not recorded
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308
Materials 4.2.9 Alternative compliance (EPDs and/or certifications). Printed as 4.2.8 in Commercial. Same treatment in all ten typology sections.
EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages
- Status
- Accepted
- Edition named
- Not stated by the tool
- Products
- procured materials (any)
- Scope
- Alternative “compliance” (EnviroDevelopment’s word) route. 80% of procured materials is a project threshold. No EN15804 requirement is stated in this option.
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308
WELL v2
Rating tool · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
X01 Material Restrictions, Part 3 Restrict Lead, 1: Paints and electronics (paints)
WELL v2 · WELL v2, Q2 2025
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- Scope
- Paint path only. Not the electronics or drinking-water pipe parts of X01 Part 3.
- The rule
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X01 (materials/feature/1)
- Status
- Outside this credit's scope
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. X01 (materials/feature/1)).
- Source
- WELL v2 · X01 (materials/feature/1)
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- Scope
- Paint path only.
- The rule
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X01 (materials/feature/1)
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- Scope
- Paint path only.
- The rule
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X01 (materials/feature/1)
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- Scope
- Paint path only.
- The rule
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X01 (materials/feature/1)
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- Scope
- Paint path only.
- The rule
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X01 (materials/feature/1)
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- Scope
- Paint path only.
- The rule
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X01 (materials/feature/1)
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- Scope
- Paint path only.
- The rule
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X01 (materials/feature/1)
X06 VOC Restrictions, Part 1 Limit VOCs From Wet-Applied Products (VOC content)
WELL v2 · WELL v2, Q2 2025
EU Ecolabel for indoor and outdoor paints and varnishes
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- VOC content
- Products
- Interior wet-applied paints and varnishes
- Scope
- Does not cover adhesives or sealants. Does not satisfy the separate VOC emissions requirement: at least 75% of products need third-party lab testing to CDPH v1.2, AgBB, EU LCI/EN 16516-1 or a LEED v4.1 path. Not listed in X06 Part 2.
- Conditions
- Product is an indoor or outdoor paint or varnish
- Counts for the VOC content requirement only
- Source
- WELL v2 · X06 (materials/feature/6)
X07 Materials Transparency, Part 1 Select Products With Disclosed Ingredients
WELL v2 · WELL v2, Q2 2025
- Status
- Accepted
- Edition named
- Cradle-to-Cradle Certified™ product; C2C Certified® Circularity product; Material Health Certificate
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 25 distinct products.
- Source
- WELL v2 · X07 (materials/feature/7)
- Status
- Accepted
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 25 distinct products.
- Source
- WELL v2 · X07 (materials/feature/7)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- GreenRate and LCARate are not named. Project threshold: at least 25 distinct products.
- Conditions
- Must be a Global GreenTag Product Health Declaration
- Source
- WELL v2 · X07 (materials/feature/7)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 25 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 2 Select Products With Enhanced Ingredient Disclosure
WELL v2 · WELL v2, Q2 2025
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- All ingredients disclosed down to 100 ppm
- All ingredients publicly disclosed
- Source
- WELL v2 · X07 (materials/feature/7)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 3 Select Products With Third-Party Verified Ingredients
WELL v2 · WELL v2, Q2 2025
- Status
- Accepted with conditions
- Edition named
- Cradle-to-Cradle Certified™ product; C2C Certified® Circularity product; Material Health Certificate
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Ingredient disclosure “verified” (WELL’s word) by a third party not affiliated with the manufacturer or the certificate
- Source
- WELL v2 · X07 (materials/feature/7)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Ingredient disclosure “verified” (WELL’s word) by a third party not affiliated with the manufacturer or the certificate
- Source
- WELL v2 · X07 (materials/feature/7)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Must be a Global GreenTag Product Health Declaration
- Ingredient disclosure “verified” (WELL’s word) by a third party not affiliated with the manufacturer or the certificate
- Source
- WELL v2 · X07 (materials/feature/7)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X07 (materials/feature/7)
X08 Materials Optimization, Part 1 Option 1 Materials selection
WELL v2 · WELL v2, Q2 2025
Cradle to Cradle Basic Level Restricted Substances List, version 4
- Status
- Accepted with conditions
- Edition named
- v4
- Level
- 1 Point · points
- Products
- Permanently installed products, furniture, task and floor lamps
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X08 (materials/feature/8)
X08 Materials Optimization, Part 2 Select Optimized Products
WELL v2 · WELL v2, Q2 2025
Cradle to Cradle Certified™ product; Material Health Certificate
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Material Health Silver, Gold or Platinum · C2C level
- On what basis
- Material Health category of the certification, or Material Health Certificate level
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- C2C Certified Circularity is not named here. Project threshold: at least 15 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X08 (materials/feature/8)
Product Health Declaration with GreenTag HealthRATE™ mark
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- SilverHEALTH, GoldHEALTH or PlatinumHEALTH level · HealthRATE mark level
- On what basis
- GreenTag HealthRATE™ mark on the Product Health Declaration
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X08 (materials/feature/8)
Living Product Challenge, Materials and Health & Happiness Petals
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Materials and Health & Happiness Petals · Petals
- On what basis
- Living Product Challenge petals
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Materials Petal and Health & Happiness Petal achieved
- Source
- WELL v2 · X08 (materials/feature/8)
Living Product Challenge (Materials and Health & Happiness Petals) or Living Product Certification
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 Point · points
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Counts toward at least 15 distinct permanently installed products, furniture and task and floor lamps certified under a listed program
- Living Product Challenge route requires the Materials and Health & Happiness Petals
- Source
- WELL v2 · X08 (materials/feature/8)
X11 Cleaning Products and Protocols, Part 1 Option 2; Part 2
WELL v2 · WELL v2, Q2 2025
- Status
- Outside this credit's scope
- Edition named
- GS-42 (Standard for Commercial and Institutional Cleaning Services)
- Products
- Cleaning services and cleaning products
- Scope
- Cleaning services and products, not construction products.
- Source
- WELL v2 · X11 (materials/feature/11)
Nordic Swan Ecolabelling for Cleaning Services criteria
- Status
- Outside this credit's scope
- Edition named
- Not stated by the tool
- Products
- Cleaning services and cleaning products
- Scope
- Cleaning services and products, not construction products.
- Source
- WELL v2 · X11 (materials/feature/11)
X11 Cleaning Products and Protocols, Part 2 Select Preferred Cleaning Products
WELL v2 · WELL v2, Q2 2025
- Status
- Outside this credit's scope
- Edition named
- Not stated by the tool
- Products
- Cleaning products
- Scope
- Cleaning products, not construction products.
- Source
- WELL v2 · X11 (materials/feature/11)
- Status
- Outside this credit's scope
- Edition named
- Not stated by the tool
- Products
- Cleaning products
- Scope
- Cleaning products, not construction products.
- Source
- WELL v2 · X11 (materials/feature/11)
- Status
- Outside this credit's scope
- Edition named
- Not stated by the tool
- Products
- Cleaning products
- Scope
- Cleaning products, not construction products.
- Source
- WELL v2 · X11 (materials/feature/11)
- Status
- Outside this credit's scope
- Edition named
- Not stated by the tool
- Products
- Cleaning products
- Scope
- Cleaning products, not construction products.
- Source
- WELL v2 · X11 (materials/feature/11)
- Status
- Outside this credit's scope
- Edition named
- Not stated by the tool
- Products
- Cleaning products
- Scope
- Cleaning products, not construction products.
- Source
- WELL v2 · X11 (materials/feature/11)
BREEAM International NC v7.1
Rating tool · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Evidence requirements, Table 8 Evidence types: Certificates of compliance (third party)
BREEAM International NC v7.1 · BREEAM International New Construction Technical Manual 7.1.0, 26/08/2026, SD6073
- Status
- Outside this credit's scope
- Edition named
- Not stated by the tool
- Scope
- General list of evidence document types, not a credit
- Source
- BREEAM International NC v7.1 · p. 34
- Status
- Outside this credit's scope
- Edition named
- Not stated by the tool
- Scope
- General list of evidence document types, not a credit
- Source
- BREEAM International NC v7.1 · p. 34
- Status
- Outside this credit's scope
- Edition named
- Not stated by the tool
- Scope
- General list of evidence document types, not a credit
- Source
- BREEAM International NC v7.1 · p. 34
Man 03 Responsible construction, legally harvested and traded timber
BREEAM International NC v7.1 · BREEAM International New Construction Technical Manual 7.1.0, 26/08/2026, SD6073
- Status
- Excluded by the tool under this credit
- Edition named
- Not stated by the tool
- Products
- Timber
- Scope
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v7.1 · p. 66
Man 03 Responsible construction, legally harvested and traded timber evidence table
BREEAM International NC v7.1 · BREEAM International New Construction Technical Manual 7.1.0, 26/08/2026, SD6073
FSC certification (includes products labelled FSC Mix)
- Status
- Accepted
- Edition named
- Not stated by the tool
- Level
- Yes / Yes · Demonstrates timber is legally harvested / Demonstrates timber is legally traded
- On what basis
- Evidence type for the legally harvested and traded timber requirement
- Products
- Timber
- Scope
- Applies only to new formwork, scaffolding boards or other new temporary site timber purchased for the project. Reused timber that can be “verified” (BREEAM’s word) is excluded. FSC Controlled Wood only is excluded (separate row).
- Source
- BREEAM International NC v7.1 · p. 66
PEFC certification (includes products labelled PEFC mixed sources)
- Status
- Accepted
- Edition named
- Not stated by the tool
- Level
- Yes / Yes · Demonstrates timber is legally harvested / Demonstrates timber is legally traded
- On what basis
- Evidence type for the legally harvested and traded timber requirement
- Products
- Timber
- Scope
- Applies only to new formwork, scaffolding boards or other new temporary site timber purchased for the project. Reused timber that can be “verified” (BREEAM’s word) is excluded.
- Source
- BREEAM International NC v7.1 · p. 66
Sustainable Forestry Initiative
- Status
- Accepted
- Edition named
- Not stated by the tool
- Level
- Yes / Yes · Demonstrates timber is legally harvested / Demonstrates timber is legally traded
- On what basis
- Evidence type for the legally harvested and traded timber requirement
- Products
- Timber
- Scope
- Applies only to new formwork, scaffolding boards or other new temporary site timber purchased for the project. Reused timber that can be “verified” (BREEAM’s word) is excluded.
- Source
- BREEAM International NC v7.1 · p. 66
Mat 01
BREEAM International NC v7.1 · BREEAM International New Construction Technical Manual 7.1.0, 26/08/2026, SD6073
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- first choice: product-specific EPD · Order of preference for LCA data
- On what basis
- LCA quality requirement checked by the third-party verifier for the exemplary verification credit (technical design phase)
- Products
- Construction products in the building LCA
- Scope
- Technical design and post-construction phases put a product EPD first and generic data second. Early design accepts generic or manufacturer-specific data.
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v7.1 · Mat 01 · p. 298, 299, 301
Mat 02
BREEAM International NC v7.1 · BREEAM International New Construction Technical Manual 7.1.0, 26/08/2026, SD6073
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 0.5 · EPD points
- On what basis
- Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
- Products
- Construction products (Table 75 material classes)
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 0.75 · EPD points
- On what basis
- Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
- Products
- Construction products (Table 75 material classes)
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 · EPD points
- On what basis
- Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
- Products
- Construction products (Table 75 material classes)
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 0.5 (EPD for more than one product in the same product category, more than one manufacturer) / 0.75 (more than one product, single manufacturer) / 1.5 (single product or colour/pattern variations, single manufacturer) · EPD points
- On what basis
- Per EPD, by EPD type (0.5 / 0.75 / 1.5, see EPD rows)
- Products
- Construction products
- The rule
- EPD unexpired at the point of specification
- Product installed in the building by the end of construction
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- EPD not pending verification at the time of specification (CN2)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 304
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 0.5 (EPD for more than one product in the same product category, more than one manufacturer) / 0.75 (more than one product, single manufacturer) / 1.5 (single product or colour/pattern variations, single manufacturer) · EPD points
- On what basis
- Per EPD, by EPD type (0.5 / 0.75 / 1.5, see EPD rows)
- Products
- Construction products
- The rule
- EPD unexpired at the point of specification
- Product installed in the building by the end of construction
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- EPD not pending verification at the time of specification (CN2)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 304
Mat 03
BREEAM International NC v7.1 · GN18 V3.7 May 2023 (released 31/05/2023), applied to BREEAM International NC Technical Manual 7.1.0, 26/08/2026
'ASI Certified Performance', with 'ASI Certified Chain of Custody'
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per scheme label, used in the Mat 03 calculator tool
- Products
- Aluminium
- Conditions
- Both ASI Certified Performance and ASI Certified Chain of Custody held
- Provisional certification not accepted
- Aluminium originates from a casthouse that is a certified ASI Member, and/or a later supplier of that aluminium is a certified ASI Member
- Requirement included in project documents and evidenced for installed products (Table 1 note 4)
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3
- Status
- Accepted
- Edition named
- All (Issue 3)
- Level
- 5 (Baseline score3) · RSCS summary score level (scale 1 to 10)
- On what basis
- Minimum awarded to all products certified to the scheme (note 3)
- Products
- not stated by the tool
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3
- Status
- Accepted
- Edition named
- All (Issue 4)
- Level
- 6 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per scheme version, used in the Mat 03 calculator tool
- Products
- not stated by the tool
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
- Status
- Accepted with conditions
- Edition named
- All (Issue 4)
- Level
- 7 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per scheme version plus additional requirements, used in the Mat 03 calculator tool
- Products
- not stated by the tool
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3
- Status
- Accepted
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per scheme, used in the Mat 03 calculator tool
- Products
- Constructional steel (scheme name)
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
Certified concrete (bronze level)
- Status
- Accepted
- Edition named
- Not stated by the tool
- Level
- 4 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per scheme level, used in the Mat 03 calculator tool
- Products
- Concrete
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
Certified concrete (silver level)
- Status
- Accepted
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per scheme level, used in the Mat 03 calculator tool
- Products
- Concrete
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
Certified concrete (gold level)
- Status
- Accepted
- Edition named
- Not stated by the tool
- Level
- 6 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per scheme level, used in the Mat 03 calculator tool
- Products
- Concrete
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
Certified concrete (platinum level)
- Status
- Accepted
- Edition named
- Not stated by the tool
- Level
- 7 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per scheme level, used in the Mat 03 calculator tool
- Products
- Concrete
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
- Status
- Accepted
- Edition named
- 'FSC 100%'
- Level
- 7 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per label, used in the Mat 03 calculator tool
- Products
- not stated by the tool
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
- Status
- Accepted
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per label, used in the Mat 03 calculator tool
- Products
- not stated by the tool
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
- Status
- Accepted
- Edition named
- 'PEFC Certified - 100% PEFC Origin'
- Level
- 7 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per label, used in the Mat 03 calculator tool
- Products
- not stated by the tool
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
'PEFC Certified', 'PEFC Recycled'
- Status
- Accepted
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per label, used in the Mat 03 calculator tool
- Products
- not stated by the tool
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2
'SFI Certified Chain of Custody, Promoting Sustainable Forestry'
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 6 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per label plus additional requirement, used in the Mat 03 calculator tool
- Products
- not stated by the tool
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3
'SFI Certified Chain of Custody, Promoting Sustainable Forestry'
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per label plus additional requirement, used in the Mat 03 calculator tool
- Products
- not stated by the tool
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3