Klar Cite
Menu
ScheduleProduct pagesCredentialsRatings & PolicyCompare standardsSearch
PricingSign in

Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

Australia and New Zealand

International

Which credential?

What NABERS Embodied Carbon v2.1 (pilot) and BREEAM International NC v7.1 accept. Pick credentials to narrow it. Clear selection

NABERS Embodied Carbon v2.1 (pilot)

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

9.4.2 a); 9.4.3.1 Conforming EPDs; 9.4.3.2; 9.4.3.3; 9.4.3.5 (product-specific emission factor, specific-product EPD)

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • EPD

    Status
    Accepted with conditions
    Edition named
    ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017
    On what basis
    GWPT, modules A1-A3
    Products
    Any included material with a product-specific EPD
    Scope
    Overrides the default emission factor for that material only; cannot be used for similar products from other manufacturers; modules A1-A3 only
    Conditions
    Not shown under New South Wales Government (NABERS)'s terms
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61

9.4.2 a); 9.4.4.1 Conforming carbon footprint declarations; 9.4.4.2

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • ISO 14067 or PAS 2050 (Related documents list ISO 14067:2018)

    Status
    Accepted with conditions
    Edition named
    Related documents list ISO 14067:2018
    On what basis
    GHG total emissions, modules A1-A3, entered as GWPT
    Products
    Any included material
    Scope
    Overrides the default emission factor for that material; modules A1-A3
    Conditions
    • follows ISO 14067 or PAS 2050
    • system boundary matches the EN 15804 or ISO 21930 boundary
    • names the material by unique product name or code
    • independently “verified” (NABERS’s word) by a verifier not involved in defining the scope or conducting the LCA study
    • dated within five years before the last delivery of the product to site
    • unit matches the unit selected in the input form
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 9, 53, 61, 62

9.4.2 a); 9.4.5.1 Conforming Climate Active Public Disclosure Statements; 9.4.5.2

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • Climate Active Product Certification (Public Disclosure Statement)

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    GHG total emissions, modules A1-A3, entered as GWPT
    Products
    Any included material
    Scope
    Product-level certification only; other Climate Active certifications are not considered (definition)
    Conditions
    Not shown under New South Wales Government (NABERS)'s terms
    Reads two ways
    SC-006: the tool reads two ways (p. 53 and p. 62); this row follows p. 62
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 12, 53, 62

9.4.2 b); 9.4.3.1 f); 9.4.3.4 Industry average EPDs

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • EPD

    Status
    Accepted with conditions
    Edition named
    ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017 (industry average EPD)
    On what basis
    Worst-case GWPT, modules A1-A3 (average multiplied by maximum variation)
    Products
    Materials covered by an industry average EPD
    Scope
    Second priority after product-specific data (9.4.2 b))
    Conditions
    Not shown under New South Wales Government (NABERS)'s terms
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61

9.4.3.1 Conforming EPDs (example)

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • EPD Australasia

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    GWPT, modules A1-A3
    Products
    Any included material with a product-specific EPD
    Scope
    Same scope as the EPD rows (emission factor, industry average, stored carbon)
    Conditions
    • each EPD “meets” (NABERS’s word) the 9.4.3.1 conditions
    • use the EPD version valid at the time of delivery to site, obtained from the manufacturer if the online version is newer
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 59

9.4.3.1 d) Conforming EPDs

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Products
    Any included material with a product-specific EPD
    Scope
    Same scope as the EPD rows
    The rule
    Not shown under New South Wales Government (NABERS)'s terms
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 59

9.4.3.5; 10.4.1; 10.4.2.3 (stored biogenic carbon from older EPDs)

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • EPD

    Status
    Accepted with conditions
    Edition named
    EN 15804+A1 and ISO 21930 (as printed)
    On what basis
    Stored biogenic carbon in product
    Products
    Timber and paper materials
    Scope
    Counts toward the Carbon Removal Indicator only
    Conditions
    • EPD conforms to Section 9.4.3.1
    • timber or paper material only
    • EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
    • a stored carbon value given in text or a diagram may be used only if the EPD clearly states it is stored in the product
    • stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
    • if unsure or not reported, estimate using 10.4.3
    • GWPB must not be used
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 61, 68, 69, 94

9.7.2 Vertical transport services (lift EPDs)

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Modules A1-A3
    Products
    Lifts
    Scope
    Replaces default vertical transport emission factors
    Conditions
    • conforming EPD as per Section 9.4
    • multiply the per-tkm factor by the total transportation performance over the service life per ISO 25745-2
    • where several usage categories are published, select the most appropriate one as detailed in the EPD and confirmed by the lift manufacturer or developer
    • enter the mass of the lift
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 65

10.3 Claiming carbon neutral materials; 14.8.1

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • Climate Active Product Certification (Public Disclosure Statement)

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Carbon offsets, modules A1-A3
    Products
    Individual building materials
    Scope
    Carbon Removal Indicator only; does not affect the star rating or emissions intensity
    Conditions
    • a product-specific emission factor for the Climate Active certified product is used per 9.4.5
    • individual building materials only
    • covers extraction, processing and manufacture only (A1-A3)
    • public disclosure statement for the year the material was purchased
    • as-built evidence that the specific material was used
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 67, 94

10.4.1; 10.4.2.1; 10.4.2.3; 14.8.2 (stored biogenic carbon in timber, Carbon Removal Indicator)

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • EPD

    Status
    Accepted with conditions
    Edition named
    EN 15804+A2:2019
    On what basis
    Stored biogenic carbon in product (BCC-prod)
    Products
    Timber and paper materials
    Scope
    Counts toward the Carbon Removal Indicator only; does not affect the star rating or emissions intensity; not for repurposed materials (10.6) or non-timber biomass (10.5)
    Conditions
    • timber or paper material only
    • applies when a product-specific emission factor per Section 9.4 (conforming EPD) is used
    • EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
    • a statement that at least 95 % of the timber is certified is acceptable
    • use BCC-prod; exclude BCC-pack
    • stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
    • GWPB must not be used to find stored biogenic carbon
    • if stored carbon cannot be found, use the default estimate in 10.4.3
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 68, 69, 94

10.4.1; 10.4.4 (default emission factor); 14.8.2

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Products
    Timber and paper materials
    Scope
    Stored biogenic carbon in the Carbon Removal Indicator only; not repurposed materials; non-timber biomass is referred to the National Administrator (10.5)
    Conditions
    • timber or paper material only
    • retain FSC certification details including licence number
    • where an EPD states the certified share, at least 95 % is acceptable
    • with a default emission factor, select 'sustainable forest certified' in the input form
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94

  • Responsible Wood

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Products
    Timber and paper materials
    Scope
    Stored biogenic carbon in the Carbon Removal Indicator only
    Conditions
    • timber or paper material only
    • Responsible Wood certification as part of PEFC
    • retain certification details including licence number
    • where an EPD states the certified share, at least 95 % is acceptable
    • with a default emission factor, select 'sustainable forest certified' in the input form
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94

10.4.1; 10.4.4; 14.8.2

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Products
    Timber and paper materials
    Scope
    Stored biogenic carbon in the Carbon Removal Indicator only
    Conditions
    • timber or paper material only
    • certified by Responsible Wood as part of PEFC (per 10.4.1)
    • retain certification details including licence number
    • where an EPD states the certified share, at least 95 % is acceptable
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94

10.4.2.1; 10.4.2.4 Finding stored biogenic carbon in a carbon footprint; 14.8.2

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • Product Carbon Footprint

    Status
    Accepted with conditions
    Edition named
    ISO 14067 or PAS 2050
    On what basis
    GHG biogenic removals
    Products
    Timber and paper materials
    Scope
    Counts toward the Carbon Removal Indicator only
    Conditions
    • carbon footprint conforms to 9.4.4.1 (“compliant” (NABERS’s word) with ISO 14067 or PAS 2050; system boundary “equivalent” to EN 15804 or ISO 21930; refers directly to the material by unique product name or code; independently “verified”, verifier not involved in defining scope or conducting the LCA; dated within five years before the last delivery of the product to site)
    • timber or paper material only
    • confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
    • use the GHG biogenic removals value
    • if not reported separately, estimate using 10.4.3
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 68, 70, 94

10.4.2.1; 10.4.2.5 Finding stored biogenic carbon in a Climate Active Public Disclosure Statement; 10.4.3

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • Climate Active Product Certification (Public Disclosure Statement)

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Estimated stored biogenic carbon (Formula 10.4.3a)
    Products
    Timber products
    Scope
    Carbon Removal Indicator only
    Conditions
    • timber or paper material only
    • the certification confirms the material is from a sustainably managed source
    • stored carbon must be calculated with the 10.4.3 method
    • water content, moisture content or dry-matter carbon content from the statement are used where published, otherwise the default assumptions apply
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 68, 70, 71

11.4.4 Source location as defined by an EPD; 14.9.1

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Source location for transport emissions
    Products
    Materials entered with an EPD
    Scope
    Transport emissions (A4) source location only
    Conditions
    • source location is the manufacturing exit gate stated in the EPD
    • where the EPD lists several production sites, use the site closest to the rated premises unless the actual site used is known
    • not available for default assemblies
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 74, 95

12.3.2.2 Standard for acceptable data (construction and commissioning energy); 14.10.1

NABERS Embodied Carbon v2.1 (pilot) · Version 2.1 (date not printed on the supplied pages)

  • Climate Active Building Certification (Public Disclosure Statement)

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Site construction and commissioning energy use
    Products
    Construction and commissioning energy (not a product)
    Scope
    Evidence for replacing the default construction energy rate only
    Conditions
    • clearly shows the amount of energy use
    • clearly shows the date of sale or time period of use
    • record from a third party
    • for construction and commissioning energy only (12.3.2.2), not for material emissions, where only product certifications count (p. 12)
    Source
    NABERS Embodied Carbon v2.1 (pilot) · p. 77, 95

BREEAM International NC v7.1

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Evidence requirements, Table 8 Evidence types: Certificates of compliance (third party)

BREEAM International NC v7.1 · BREEAM International New Construction Technical Manual 7.1.0, 26/08/2026, SD6073

  • BES 6001

    Status
    Outside this credit's scope
    Edition named
    Not stated by the tool
    Scope
    General list of evidence document types, not a credit
    Source
    BREEAM International NC v7.1 · p. 34

  • EPD

    Status
    Outside this credit's scope
    Edition named
    Not stated by the tool
    Scope
    General list of evidence document types, not a credit
    Source
    BREEAM International NC v7.1 · p. 34

  • FSC

    Status
    Outside this credit's scope
    Edition named
    Not stated by the tool
    Scope
    General list of evidence document types, not a credit
    Source
    BREEAM International NC v7.1 · p. 34

Man 03 Responsible construction, legally harvested and traded timber

BREEAM International NC v7.1 · BREEAM International New Construction Technical Manual 7.1.0, 26/08/2026, SD6073

  • FSC Controlled Wood

    Status
    Excluded by the tool under this credit
    Edition named
    Not stated by the tool
    Products
    Timber
    Scope
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v7.1 · p. 66

Man 03 Responsible construction, legally harvested and traded timber evidence table

BREEAM International NC v7.1 · BREEAM International New Construction Technical Manual 7.1.0, 26/08/2026, SD6073

  • FSC certification (includes products labelled FSC Mix)

    Status
    Accepted
    Edition named
    Not stated by the tool
    Level
    Yes / Yes · Demonstrates timber is legally harvested / Demonstrates timber is legally traded
    On what basis
    Evidence type for the legally harvested and traded timber requirement
    Products
    Timber
    Scope
    Applies only to new formwork, scaffolding boards or other new temporary site timber purchased for the project. Reused timber that can be “verified” (BREEAM’s word) is excluded. FSC Controlled Wood only is excluded (separate row).
    Source
    BREEAM International NC v7.1 · p. 66

  • PEFC certification (includes products labelled PEFC mixed sources)

    Status
    Accepted
    Edition named
    Not stated by the tool
    Level
    Yes / Yes · Demonstrates timber is legally harvested / Demonstrates timber is legally traded
    On what basis
    Evidence type for the legally harvested and traded timber requirement
    Products
    Timber
    Scope
    Applies only to new formwork, scaffolding boards or other new temporary site timber purchased for the project. Reused timber that can be “verified” (BREEAM’s word) is excluded.
    Source
    BREEAM International NC v7.1 · p. 66

  • Sustainable Forestry Initiative

    Status
    Accepted
    Edition named
    Not stated by the tool
    Level
    Yes / Yes · Demonstrates timber is legally harvested / Demonstrates timber is legally traded
    On what basis
    Evidence type for the legally harvested and traded timber requirement
    Products
    Timber
    Scope
    Applies only to new formwork, scaffolding boards or other new temporary site timber purchased for the project. Reused timber that can be “verified” (BREEAM’s word) is excluded.
    Source
    BREEAM International NC v7.1 · p. 66

Mat 01

BREEAM International NC v7.1 · BREEAM International New Construction Technical Manual 7.1.0, 26/08/2026, SD6073

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Not shown under BRE Global Ltd's terms
    On what basis
    LCA quality requirement checked by the third-party verifier for the exemplary verification credit (technical design phase)
    Products
    Construction products in the building LCA
    Scope
    Technical design and post-construction phases put a product EPD first and generic data second. Early design accepts generic or manufacturer-specific data.
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v7.1 · Mat 01 · p. 298, 299, 301

Mat 02

BREEAM International NC v7.1 · BREEAM International New Construction Technical Manual 7.1.0, 26/08/2026, SD6073

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    0.5 · EPD points
    On what basis
    Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
    Products
    Construction products (Table 75 material classes)
    Scope
    Not shown under BRE Global Ltd's terms
    Conditions
    • EPD unexpired at the point of specification
    • EPD not pending verification at specification
    • Product installed in the building by the end of construction
    • EPD issued or registered by a programme operator working to ISO 14025
    • For products under the Construction Product Regulations: product category rules based on BS EN 15804
    • Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
    Source
    BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    0.75 · EPD points
    On what basis
    Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
    Products
    Construction products (Table 75 material classes)
    Scope
    Not shown under BRE Global Ltd's terms
    Conditions
    • EPD unexpired at the point of specification
    • EPD not pending verification at specification
    • Product installed in the building by the end of construction
    • EPD issued or registered by a programme operator working to ISO 14025
    • For products under the Construction Product Regulations: product category rules based on BS EN 15804
    • Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
    Source
    BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1.5 · EPD points
    On what basis
    Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
    Products
    Construction products (Table 75 material classes)
    Scope
    Not shown under BRE Global Ltd's terms
    Conditions
    • EPD unexpired at the point of specification
    • EPD not pending verification at specification
    • Product installed in the building by the end of construction
    • EPD issued or registered by a programme operator working to ISO 14025
    • For products under the Construction Product Regulations: product category rules based on BS EN 15804
    • Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
    Source
    BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305

  • EPD Australasia

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    0.5 (EPD for more than one product in the same product category, more than one manufacturer) / 0.75 (more than one product, single manufacturer) / 1.5 (single product or colour/pattern variations, single manufacturer) · EPD points
    On what basis
    Per EPD, by EPD type (0.5 / 0.75 / 1.5, see EPD rows)
    Products
    Construction products
    The rule
    • EPD unexpired at the point of specification
    • Product installed in the building by the end of construction
    • For products under the Construction Product Regulations: product category rules based on BS EN 15804
    • EPD not pending verification at the time of specification (CN2)
    Source
    BREEAM International NC v7.1 · Mat 02 · p. 304

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    0.5 (EPD for more than one product in the same product category, more than one manufacturer) / 0.75 (more than one product, single manufacturer) / 1.5 (single product or colour/pattern variations, single manufacturer) · EPD points
    On what basis
    Per EPD, by EPD type (0.5 / 0.75 / 1.5, see EPD rows)
    Products
    Construction products
    The rule
    • EPD unexpired at the point of specification
    • Product installed in the building by the end of construction
    • For products under the Construction Product Regulations: product category rules based on BS EN 15804
    • EPD not pending verification at the time of specification (CN2)
    Source
    BREEAM International NC v7.1 · Mat 02 · p. 304

Mat 03

BREEAM International NC v7.1 · GN18 V3.7 May 2023 (released 31/05/2023), applied to BREEAM International NC Technical Manual 7.1.0, 26/08/2026

  • 'ASI Certified Performance', with 'ASI Certified Chain of Custody'

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per scheme label, used in the Mat 03 calculator tool
    Products
    Aluminium
    Conditions
    • Both ASI Certified Performance and ASI Certified Chain of Custody held
    • Provisional certification not accepted
    • Aluminium originates from a casthouse that is a certified ASI Member, and/or a later supplier of that aluminium is a certified ASI Member
    • Requirement included in project documents and evidenced for installed products (Table 1 note 4)
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3

  • BES 6001

    Status
    Accepted
    Edition named
    All (Issue 3)
    Level
    5 (Baseline score3) · RSCS summary score level (scale 1 to 10)
    On what basis
    Minimum awarded to all products certified to the scheme (note 3)
    Products
    not stated by the tool
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3

  • BES 6001

    Status
    Accepted
    Edition named
    All (Issue 4)
    Level
    6 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per scheme version, used in the Mat 03 calculator tool
    Products
    not stated by the tool
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

  • BES 6001

    Status
    Accepted with conditions
    Edition named
    All (Issue 4)
    Level
    7 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per scheme version plus additional requirements, used in the Mat 03 calculator tool
    Products
    not stated by the tool
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3

  • All

    Status
    Accepted
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per scheme, used in the Mat 03 calculator tool
    Products
    Constructional steel (scheme name)
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

  • Certified concrete (bronze level)

    Status
    Accepted
    Edition named
    Not stated by the tool
    Level
    4 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per scheme level, used in the Mat 03 calculator tool
    Products
    Concrete
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

  • Certified concrete (silver level)

    Status
    Accepted
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per scheme level, used in the Mat 03 calculator tool
    Products
    Concrete
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

  • Certified concrete (gold level)

    Status
    Accepted
    Edition named
    Not stated by the tool
    Level
    6 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per scheme level, used in the Mat 03 calculator tool
    Products
    Concrete
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

  • Certified concrete (platinum level)

    Status
    Accepted
    Edition named
    Not stated by the tool
    Level
    7 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per scheme level, used in the Mat 03 calculator tool
    Products
    Concrete
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

  • FSC

    Status
    Accepted
    Edition named
    'FSC 100%'
    Level
    7 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per label, used in the Mat 03 calculator tool
    Products
    not stated by the tool
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

  • 'FSC Mix', 'FSC Recycled'

    Status
    Accepted
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per label, used in the Mat 03 calculator tool
    Products
    not stated by the tool
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

  • PEFC

    Status
    Accepted
    Edition named
    'PEFC Certified - 100% PEFC Origin'
    Level
    7 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per label, used in the Mat 03 calculator tool
    Products
    not stated by the tool
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

  • 'PEFC Certified', 'PEFC Recycled'

    Status
    Accepted
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per label, used in the Mat 03 calculator tool
    Products
    not stated by the tool
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2

  • 'SFI Certified Chain of Custody, Promoting Sustainable Forestry'

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    6 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per label plus additional requirement, used in the Mat 03 calculator tool
    Products
    not stated by the tool
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3

  • 'SFI Certified Chain of Custody, Promoting Sustainable Forestry'

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    Per label plus additional requirement, used in the Mat 03 calculator tool
    Products
    not stated by the tool
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3