Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

What Green Star Responsible Products, EnviroDevelopment v4, EarthCheck BPDS v5 and LEED v5 ID+C accept. Pick credentials to narrow it. Clear selection

Green Star Responsible Products

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Responsible Products Value

Green Star Responsible Products · Responsible Standard Scoring Dashboard as at 2026-10-27

EnviroDevelopment v4

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Materials 4.2.5(b) Structure: non-structural steel. Same clause in all ten typology sections: Masterplanned Communities, Residential Subdivision, Seniors Living, Multi-Unit Residential, Mixed Use, Industrial, Retail, Education, Health and Aged Care, Commercial

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Environmental Product Declaration to EN15804
    Products
    non-structural steel
    Scope
    Built form structure option. It is an alternative to recycled content ≥15%. It applies to 80% of non-structural steel, a project quantity.
    Conditions
    • EPD to EN15804
    • product is non-structural steel
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

Materials 4.2.5(b), (e), (f) Structure: EPD to EN15804 options for non-structural steel, structural timber and bricks. All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD Australasia

    Status
    Accepted as a kind of credential
    Edition named
    Not stated by the tool
    Products
    non-structural steel; structural timber; bricks
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
  • International EPD System

    Status
    Accepted as a kind of credential
    Edition named
    Not stated by the tool
    Products
    non-structural steel; structural timber; bricks
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified
    On what basis
    certified to FSC (Forest Stewardship Council) standard
    Products
    structural timber
    Scope
    Built form structure option. It is an alternative to PEFC/AFS or an EPD to EN15804.
    Conditions
    product is structural timber
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified
    On what basis
    certified to a PEFC standard
    Products
    structural timber
    Scope
    Built form structure option. It is an alternative to FSC or an EPD to EN15804.
    Conditions
    product is structural timber
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
  • Responsible Wood

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified
    On what basis
    certified to AFS (Australian Forestry Standard), named as an example of a PEFC standard
    Products
    structural timber
    Scope
    Built form structure option.
    Conditions
    product is structural timber
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307, 317

Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. Same treatment in all ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Environmental Product Declaration to EN15804
    Products
    structural timber
    Scope
    Built form structure option. It is an alternative or addition to PEFC/AFS/FSC certification.
    Conditions
    • EPD to EN15804
    • product is structural timber
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

Materials 4.2.5(f) Structure: bricks. Lettered 4.2.5(e) in Residential Subdivision. Same treatment in all ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Environmental Product Declaration to EN15804
    Products
    bricks
    Scope
    Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
    Conditions
    • EPD to EN15804
    • product is bricks
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

Materials 4.2.6(a) Envelope / linings: timber window frames. All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    accredited/endorsed
    Products
    timber window frames
    Scope
    Building envelope option.
    Conditions
    product is timber window frames
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307
  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    accredited/endorsed
    Products
    timber window frames
    Scope
    Building envelope option.
    Conditions
    product is timber window frames
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307
  • Responsible Wood

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    accredited/endorsed
    On what basis
    AFS given as an example of PEFC
    Products
    timber window frames
    Scope
    Building envelope option.
    Conditions
    product is timber window frames
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307

Materials 4.2.8(b) Furniture, fixtures, equipment and finishes: carpet. Lettered 4.2.8(e) in Mixed Use. All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • Carpet Institute

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    level 2 or greater · level
    On what basis
    Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
    Products
    carpet
    Scope
    Furniture, fixtures, equipment and finishes option. Minimum 50% of the carpet is a project threshold.
    Conditions
    Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307).
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307

Materials 4.2.8(c) Furniture, fixtures, equipment and finishes: joinery. Lettered 4.2.8(f) in Mixed Use. All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified/endorsed
    Products
    joinery
    Scope
    Furniture, fixtures, equipment and finishes option.
    Conditions
    product is joinery
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307
  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified/endorsed
    Products
    joinery
    Scope
    Furniture, fixtures, equipment and finishes option.
    Conditions
    product is joinery
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307
  • Responsible Wood

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified/endorsed
    On what basis
    AFS given as an example of PEFC
    Products
    joinery
    Scope
    Furniture, fixtures, equipment and finishes option.
    Conditions
    product is joinery
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307

Materials 4.2.9 Alternative compliance (4.2.8 in Commercial). All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD Australasia

    Status
    Accepted as a kind of credential
    Edition named
    Not stated by the tool
    Products
    procured materials (any)
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308
  • International EPD System

    Status
    Accepted as a kind of credential
    Edition named
    Not stated by the tool
    Products
    procured materials (any)
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

Materials 4.2.9 Alternative compliance (EPDs and/or certifications). Printed as 4.2.8 in Commercial. Same treatment in all ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD

    Status
    Accepted
    Edition named
    Not stated by the tool
    Products
    procured materials (any)
    Scope
    Alternative “compliance” (EnviroDevelopment’s word) route. 80% of procured materials is a project threshold. No EN15804 requirement is stated in this option.
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

EarthCheck BPDS v5

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

30 Sustainable Materials Selection and Arrangement, 30.1 Green rating/eco-label schemes

EarthCheck BPDS v5 · Version 5 (date not printed on pages 16, 17, 75-77)

  • Blue Angel

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • Carpet Institute

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Floorings (if a carpet product)
    Scope
    Counts only for the listed material categories.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75
  • Eco Choice Aotearoa

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • EU Ecolabel

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • GECA

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • Global GreenTag

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • Green Seal

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • Nordic Swan

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • SCS Standards

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Counts only for the listed material categories.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75

30.1 Guidance: fallback where no formal rating is available for a material

EarthCheck BPDS v5 · Version 5 (date not printed on pages 16, 17, 75-77)

  • EPD

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Not shown under EarthCheck Pty Ltd's terms
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75
  • EPD Australasia

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Not shown under EarthCheck Pty Ltd's terms
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75
  • International EPD System

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Not shown under EarthCheck Pty Ltd's terms
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75

LEED v5 ID+C

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

MRc4

LEED v5 ID+C · Criteria Areas & Achievement Levels in LEED v5, Version 1.3, February 2026 (updated February 24, 2026); MRc4 ID+C credit page printed 4/9/2026

  • Concrete Sustainability Council

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Plant Bronze: 1
    • Plant Silver: 2
    • Plant Gold or Platinum: 3
    • CO2 Module 1 Star: 1
    • CO2 Module 2, 3 or 4 Stars: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health, Social Health & Equity
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    concrete
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 4
  • Certified (v3.1, v4.0/4.1)

    Status
    Accepted with conditions
    Edition named
    v3.1, v4.0/4.1Not all current editions: Klar Cite holds v5.0 as current
    Level
    • Bronze v3.1: 1+
    • Bronze v4.0/4.1: 2+
    • Silver v3.1: 3+
    • Silver v4.0/4.1: 5
    • Gold v3.1: 5
    • Gold v4.0/4.1: 5
    • Platinum v3.1: 5
    • Platinum v4.0/4.1: 5
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health, Climate Health, Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-001: the tool reads two ways (p. 17 and p. 4); the combined score is Table 1's (p. 4; owner, 28 Oct 2026)
    Source
    LEED v5 ID+C · MRc4 · p. 4
  • Certified Circularity (v4.1)

    Status
    Accepted with conditions
    Edition named
    v4.1Not the current edition: Klar Cite holds v5.0 as current
    Level
    • Bronze: 1+
    • Silver: 2
    • Gold: 3
    • Platinum: 4
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 4
  • Material Health Certificate (v3.1/v4.0/v4.1)

    Status
    Accepted with conditions
    Edition named
    v3.1/v4.0/v4.1Not the current edition: Klar Cite holds v5.0 as current
    Level
    • Bronze: 1
    • Silver: 2
    • Gold: 3
    • Platinum: 3
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 4
  • version 2.0; v2.0 or later

    Status
    Accepted with conditions
    Edition named
    v2.0
    Level
    • Declare v2.0: 1
    • Red List Free or Approved, third-party “verified”: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • not named by the tool; industry-average (industrywide) Type III EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • EPD Australasia

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • FSC Recycled: 2
    • FSC Mix: 4
    • FSC 100%: 5
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • Global GreenTag

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Product Health Declaration: 2 · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-003: the tool reads two ways (p. 6 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 5).
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • Green Seal

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    GS-11: 2 · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • pre-checked, 1,000 ppm: 1
    • third-party “verified”, 100 ppm: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • PEFC Recycled: 2
    • PEFC Certified: 3
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • Responsible Wood

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • PEFC Recycled: 2
    • PEFC Certified: 3
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • SCS Standards

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Legal sourcing with disclosure: 1 · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • Sustainable Forestry Initiative

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • 100% recycled: 2
    • forestry and recycled: 2
    • forestry: 3
    • 100% certified forest: 4
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-004: the tool reads two ways (p. 15 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026); SC-005: the tool reads two ways (p. 19, 20 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
    Source
    LEED v5 ID+C · MRc4 · p. 5