Ratings & Policy
Find where a product credential earns points or counts, and what each rating tool or policy accepts.
Pick any rating tools or policies and any credentials. The results narrow to what you pick.
Australia and New Zealand
Which credential?
- Aluminium Stewardship Initiative
- BEP PVC
- BES 6001
- Blue Angel
- CARES Sustainable Constructional Steel
- Carpet Institute
- Climate Active
- Concrete Sustainability Council
- Cradle to Cradle Certified
- Declare
- Eco Choice Aotearoa
- EMICODE
- EPD
- EPD Australasia
- EU Ecolabel
- FSC
- GECA
- Global GreenTag
- Global Organic Textile Standard
- Global Responsible Textile Standard
- Green Seal
- Health Product Declaration
- International EPD System
- Living Product Challenge
- Nordic Swan
- PEFC
- Product Carbon Footprint
- Responsible Steel
- Responsible Wood
- SCS Standards
- Steel Sustainability Australia
- Sustainable Forestry Initiative
- UL GREENGUARD
- AFRDI Green Tick
- CDPH Standard Method
- CEN
- ISO
- LEVEL
- NaturePlus (GreenCollar)
- PACT
What Australian Government ESP Policy, LEED v5 BD+C, LEED v4.1 BD+C and BREEAM International NC v6.0, superseded accept. Pick credentials to narrow it. Clear selection
Australian Government ESP Policy
Procurement policy · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Evaluation guidance – Products, 'Evidence of product sustainability' and 'Environmental Product Declarations'; SESP Template – Products, 'Products have a lower environmental footprint'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- ISO 14025 (or EN 15804 for construction products)
- On what basis
- named way to verify; 'Gold standard verification includes third-party EPDs' (p. 5)
- Products
- FFE, ICT Goods, Textiles
- Scope
- The tool says EPDs do not show environmental preferability unless compared with other robust EPDs (p. 5).
- Conditions
- Not shown under Commonwealth of Australia (Department of Finance)'s terms
- Source
- Australian Government ESP Policy · p. 5, 6, 16, 17; SESP Template (unpaginated)
Evaluation guidance – Products, 'Evidence of product sustainability' and 'Product Carbon Footprint'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- ISO 14067
- On what basis
- listed as a way to verify sustainability
- Products
- FFE, ICT Goods, Textiles
- Scope
- Not named as gold standard (p. 5). The tool says a product with an EPD would be preferable (p. 6).
- Conditions
- “verified” (the ESP Policy’s word) by a third party
- measured to ISO 14067
- product footprint, not organisational footprint (not ISO 14064-1)
- Source
- Australian Government ESP Policy · p. 5, 6, 16
Evaluation guidance – Products, Table 1
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
Carbon Neutral (printed as 'Climate Active Carbon Neutral')
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- All
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Climate only.
- Conditions
- Climate Active Carbon Neutral certification
- certification held for the product
- Source
- Australian Government ESP Policy · p. 9
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Platinum to Bronze · tiered rating
- On what basis
- tiers printed with no minimum stated; Platinum described as world's best practice
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Circularity, Climate.
- Conditions
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 9
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- FFE products only
- Source
- Australian Government ESP Policy · p. 9
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- FFE products only
- Source
- Australian Government ESP Policy · p. 9
Green Rate (printed 'Global Green Tag Green Rate')
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- described as multi-level; no minimum stated
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
- Conditions
- GreenRate certification
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 10
HealthRATE (printed 'Global Green Tag HealthRATE')
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- described as tiered; no minimum stated
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment only.
- Conditions
- HealthRATE certification
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 10
LCA Rate (printed 'Global Green Tag LCA Rate')
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
- Conditions
- LCARate certification
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 10
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
- Conditions
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 11
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- FFE products only
- Source
- Australian Government ESP Policy · p. 11
Evaluation guidance – Products, Table 1 (row 'FSC (Forest Stewardship Council)')
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Recycled; 100% sustainable; Mixed (sustainable/recycled) · certification option
- On what basis
- 3 options of certification listed; none preferred
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Circularity.
- Conditions
- FFE products only
- one of the three certification options: Recycled, 100% sustainable, Mixed
- Source
- Australian Government ESP Policy · p. 10
Evaluation guidance – Products, Table 1 (row 'GECA (Good Environmental Choice Australia)')
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
- Conditions
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 10
Evaluation guidance – Products, Table 1 (row 'Global Organic Textiles Standard (GOTS)')
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
Global Organic Textile Standard
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- Textiles products only
- Source
- Australian Government ESP Policy · p. 10
Evaluation guidance – Products, Table 1: Examples of good practice product ecolabels and sustainability certifications
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- All
- Scope
- Table 1 gives examples and is not exhaustive (p. 5). Focus areas printed: Environment, Circularity, Climate.
- Source
- Australian Government ESP Policy · p. 9
Evaluation guidance – Products, Table 3 Product sustainability considerations, 'Goods contain recycled content/recycled materials are used'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- FSC Recycled label · label
- On what basis
- named as an ecolabel that certifies recycled content
- Products
- FFE, ICT Goods, Textiles (Table 3 covers ESP products)
- Scope
- Recycled content consideration only; given as an example ('e.g.').
- Conditions
- FSC Recycled label only
- used as evidence of recycled content
- Source
- Australian Government ESP Policy · p. 17
Evaluation guidance – Products, Table 3, 'Goods contain recycled content/recycled materials are used'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
GECA Recycled Products standard
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- GECA Recycled Products standard · standard
- On what basis
- named as an ecolabel that certifies recycled content
- Products
- FFE, ICT Goods, Textiles (Table 3 covers ESP products)
- Scope
- Recycled content consideration only; given as an example ('e.g.').
- Conditions
- certification to the GECA Recycled Products standard
- used as evidence of recycled content
- Source
- Australian Government ESP Policy · p. 17
SESP Guidance for tender evaluation – Construction Services, 'Evidence'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- on the indicative list of evidence
- Products
- Construction materials
- Scope
- Indicative evidence list. Evaluators are told not all businesses can obtain EPDs.
- Conditions
- applicable to the region in which the procurement is delivered
- Source
- Australian Government ESP Policy · p. 5
SESP Template – Products, 'Products have a lower environmental footprint'; Evaluation guidance – Products, 'Evidence of product sustainability'
Australian Government ESP Policy · No version or date printed on the supplied pages (source file labelled 2026)
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- Scope
- The rule is on the EPD; class membership is on the programme.
- The rule
- EPD “verified” (the ESP Policy’s word) by a third party
- EPD to ISO 14025
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5, 6
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- The rule
- third-party “verified” (the ESP Policy’s word)
- ecolabel to ISO 14024
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- The rule
- third-party “verified” (the ESP Policy’s word)
- ecolabel to ISO 14024
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- Scope
- The rule is on the EPD; class membership is on the programme.
- The rule
- EPD “verified” (the ESP Policy’s word) by a third party
- EPD to ISO 14025
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5, 6
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- The rule
- third-party “verified” (the ESP Policy’s word)
- ecolabel to ISO 14024
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5
LEED v5 BD+C
Rating tool · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
MRc2
LEED v5 BD+C · LEED BD+C: New Construction v5, MRc2 Reduce Embodied Carbon web page (printed 4/9/2026)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1–3 POINTS · points
- On what basis
- project whole-project weighted-average GWP reduction against industry averages (Table 1)
- Products
- structure, enclosure and hardscape materials
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc2 · p. 2, 3
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1–2 POINTS NEW CONSTRUCTION · points
- On what basis
- number of material categories below industry benchmarks (Table 1: three categories 1 point; five or more 2 points)
- Products
- structure, enclosure and hardscape materials
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc2 · p. 3
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1–3 POINTS · points
- On what basis
- project GWP reduction against industry averages (Table 1)
- Products
- structure, enclosure and hardscape materials
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc2 · p. 2, 3
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1–3 POINTS · points
- On what basis
- project GWP reduction against industry averages (Table 1)
- Products
- structure, enclosure and hardscape materials
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc2 · p. 2, 3
MRc4
LEED v5 BD+C · Criteria Areas & Achievement Levels in LEED v5, Version 1.3, February 2026 (updated February 24, 2026)
Concrete Sustainability Council
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Plant Bronze: 1
- Plant Silver: 2
- Plant Gold or Platinum: 3
- CO2 Module 1 Star: 1
- CO2 Module 2, 3 or 4 Stars: 2
- Draws on
- Climate Health, Ecosystem Health, Social Health & Equity
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- concrete
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 4
- Status
- Accepted with conditions
- Edition named
- v3.1, v4.0/4.1Not all current editions: Klar Cite holds v5.0 as current
- Level
- Bronze v3.1: 1+
- Bronze v4.0/4.1: 2+
- Silver v3.1: 3+
- Silver v4.0/4.1: 5
- Gold v3.1: 5
- Gold v4.0/4.1: 5
- Platinum v3.1: 5
- Platinum v4.0/4.1: 5
- Draws on
- Human Health, Climate Health, Ecosystem Health, Social Health & Equity, Circular Economy
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Reads two ways
- SC-001: the tool reads two ways (p. 17 and p. 4); the combined score is Table 1's (p. 4; owner, 28 Oct 2026)
- Source
- LEED v5 BD+C · MRc4 · p. 4
- Status
- Accepted with conditions
- Edition named
- v4.1Not the current edition: Klar Cite holds v5.0 as current
- Level
- Bronze: 1+
- Silver: 2
- Gold: 3
- Platinum: 4
- Draws on
- Human Health, Circular Economy
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 4
Material Health Certificate (v3.1/v4.0/v4.1)
- Status
- Accepted with conditions
- Edition named
- v3.1/v4.0/v4.1Not the current edition: Klar Cite holds v5.0 as current
- Level
- Bronze: 1
- Silver: 2
- Gold: 3
- Platinum: 3
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 4
- Status
- Accepted with conditions
- Edition named
- v2.0
- Level
- Declare v2.0: 1
- Red List Free or Approved, third-party “verified”: 2
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
- Draws on
- Climate Health, Ecosystem Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
- Draws on
- Climate Health, Ecosystem Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Legal sourcing with disclosure: 1
- FSC Recycled: 2
- FSC Mix: 4
- FSC 100%: 5
- Draws on
- Ecosystem Health, Social Health & Equity, Circular Economy
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Product Health Declaration: 2 · LEED multi-attribute score (max 5)
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Reads two ways
- SC-003: the tool reads two ways (p. 6 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
- Source
- LEED v5 BD+C · MRc4 · p. 5
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- GS-11: 2 · LEED multi-attribute score (max 5)
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- products in GS-11 scope (standard scope not stated by the tool)
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- pre-checked, 1,000 ppm: 1
- third-party “verified”, 100 ppm: 2
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
- Draws on
- Climate Health, Ecosystem Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Legal sourcing with disclosure: 1
- PEFC Recycled: 2
- PEFC Certified: 3
- Draws on
- Ecosystem Health, Social Health & Equity, Circular Economy
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- PEFC Recycled: 2
- PEFC Certified: 3
- Draws on
- Ecosystem Health, Social Health & Equity, Circular Economy
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Legal sourcing with disclosure: 1 · LEED multi-attribute score (max 5)
- Draws on
- Ecosystem Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- wood products
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 5).
- Source
- LEED v5 BD+C · MRc4 · p. 5
Sustainable Forestry Initiative
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Legal sourcing with disclosure: 1
- 100% recycled: 2
- forestry and recycled: 2
- forestry: 3
- 100% certified forest: 4
- Draws on
- Ecosystem Health, Social Health & Equity, Circular Economy
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Reads two ways
- SC-004: the tool reads two ways (p. 15 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026); SC-005: the tool reads two ways (p. 19, 20 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
- Source
- LEED v5 BD+C · MRc4 · p. 5
LEED v4.1 BD+C
Rating tool · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
MR Credit
LEED v4.1 BD+C · LEED v4.1 BD+C; 2025-02-01 (date from source file name, not printed on supplied pages)
- Status
- Accepted with conditions
- Edition named
- v3
- Level
- Bronze level or higher · Material Health achievement level
- On what basis
- Cradle to Cradle Certified product, or Material Health Certificate
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 100
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Bronze level or higher · certification level
- On what basis
- valued as 1 product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Silver level or higher · certification level
- On what basis
- valued as 1.5 products
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Red List Free, LBC Red List Free, or Declared · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 100
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- LBC Red List Approved or LBC Compliant · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 100
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Red List Free or LBC Red List Free · Declare label designation
- On what basis
- valued as 1 product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- ½ product · products counted toward credit achievement
- On what basis
- per product with an action plan
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 2 products · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- ½ product · products counted toward credit achievement
- On what basis
- per product with an action plan
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 2 products · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 100% of their cost · percent of product cost counted
- On what basis
- by cost toward 15% (1 point) or 30% (2 points) of permanently installed building products
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 98
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 100% of their cost · percent of product cost counted
- On what basis
- by cost
- Products
- wood products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 100
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
- Status
- Accepted with conditions
- Edition named
- GS-11, Edition 4.0
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product
- Products
- paints, coatings, stains and sealers
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- per end use product
- Products
- permanently installed products (end use product)
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 101
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- ½ product · products counted toward credit achievement
- On what basis
- per product with an action plan
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 2 products · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 101
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
BREEAM International NC v6.0, superseded
Rating tool · what it accepts, credit by credit
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Mat 01
BREEAM International NC v6.0, superseded · Technical Manual – Version 6.0.0 – 01/12/2021 – SD250
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- per product covered by an EPD that BREEAM calls “verified”
- Products
- construction products, classified by Mat 03 Table 46 material categories
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- per product covered by a manufacturer specific EPD that BREEAM calls “verified”
- Products
- construction products, classified by Mat 03 Table 46 material categories
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- On what basis
- per product covered by an EPD that BREEAM calls “verified”
- Products
- construction products, classified by Mat 03 Table 46 material categories
- Scope
- Only two EPDs per classification group may be counted.
- The rule
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- On what basis
- per product covered by a manufacturer specific EPD that BREEAM calls “verified”
- Products
- construction products, classified by Mat 03 Table 46 material categories
- Scope
- Exemplary level only. Only two EPDs per classification group may be counted.
- The rule
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- On what basis
- per product covered by an EPD that BREEAM calls “verified”
- Products
- construction products, classified by Mat 03 Table 46 material categories
- Scope
- Only two EPDs per classification group may be counted.
- The rule
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- On what basis
- per product covered by a manufacturer specific EPD that BREEAM calls “verified”
- Products
- construction products, classified by Mat 03 Table 46 material categories
- Scope
- Exemplary level only. Only two EPDs per classification group may be counted.
- The rule
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
Mat 03
BREEAM International NC v6.0, superseded · Technical Manual – Version 6.0.0 – 01/12/2021 – SD250; Guidance Note 18 V3.7 May 2023
'ASI Certified Performance', with 'ASI Certified Chain of Custody'
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- aluminium (metal)
- Scope
- In-scope products above the cut-off volume (CN3.3). Downstream organisations without certification must “meet” (BREEAM’s word) the broken chain rules (CN3.4).
- Conditions
- both ASI Certified Performance and ASI Certified Chain of Custody
- provisional certification does not count
- aluminium originates from a casthouse that is a certified ASI Member and/or a subsequent supplier that is a certified ASI Member
- additional requirement included in project documents and evidence that installed products fulfil it
- product “compliant” (BREEAM’s word) with broken chain requirements (CN3.4) where downstream organisations lack their own certification
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 292, 293 (manual); 2, 3 (GN18)
- Status
- Accepted with conditions
- Edition named
- All (Issue 3)
- Level
- 5 (Baseline score3) · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- not limited by the tool
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- BES 6001 Issue 3
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 284, 285, 293 (manual); 2, 3 (GN18)
- Status
- Accepted with conditions
- Edition named
- All (Issue 4)
- Level
- 6 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- not limited by the tool
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- BES 6001 Issue 4
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 7 (GN18)
- Status
- Accepted with conditions
- Edition named
- All (Issue 4)
- Level
- 7 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- not limited by the tool
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 3, 7 (GN18)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- constructional steel
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- certified under the CARES Sustainable Constructional Steel Scheme
- scores zero where the product is non-“compliant” (BREEAM’s word) with the broken chain requirements (Step 1.3, p. 285): organisations downstream of the certified one may lack their own certification only if they only handle or transport, or only fabricate, assemble or install under a recognised quality management system that prevents mixing with uncertified sources and operate in a jurisdiction with robust, well-enforced environmental, social and economic controls (CN3.4, p. 284)
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 284, 285, 293 (manual); 1, 2 (GN18)
Certified concrete (bronze level)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 4 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- concrete
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- CSC certified concrete at bronze level
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)
Certified concrete (silver level)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- concrete
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- CSC certified concrete at silver level
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)
Certified concrete (gold level)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 6 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- concrete
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- CSC certified concrete at gold level
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)
Certified concrete (platinum level)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 7 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- concrete
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- CSC certified concrete at platinum level
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 7 (GN18)
- Status
- Accepted with conditions
- Edition named
- 'FSC 100%'
- Level
- 7 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- timber and timber-based products
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- FSC 100% label
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- timber and timber-based products
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- FSC Mix or FSC Recycled label
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)
- Status
- Accepted with conditions
- Edition named
- 'PEFC Certified - 100% PEFC Origin'
- Level
- 7 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- timber and timber-based products
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- PEFC Certified - 100% PEFC Origin label
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 7 (GN18)
'PEFC Certified' 'PEFC Recycled'
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- timber and timber-based products
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- PEFC Certified or PEFC Recycled label
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)
'SFI Certified Chain of Custody, Promoting Sustainable Forestry'
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 6 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- timber and timber-based products
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 3 (GN18)
'SFI Certified Chain of Custody, Promoting Sustainable Forestry'
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- timber and timber-based products
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 3 (GN18)
Mat 03
BREEAM International NC v6.0, superseded · Technical Manual – Version 6.0.0 – 01/12/2021 – SD250
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- timber and timber-based products
- Scope
- Prerequisite evidence only, not scored.
- Conditions
- named as an example of certification for legally harvested and traded timber
- evidence listed for the interim design stage
- final post-construction stage needs documentary evidence that all timber used is legally harvested and traded
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 291
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Products
- timber and timber-based products
- Scope
- Prerequisite evidence only, not scored.
- Conditions
- named as an example of certification for legally harvested and traded timber
- evidence listed for the interim design stage
- final post-construction stage needs documentary evidence that all timber used is legally harvested and traded
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 291