Klar Cite
Menu
ScheduleProduct pagesCredentialsRatings & PolicyCompare standardsSearch
PricingSign in

Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

Australia and New Zealand

International

Which credential?

What EnviroDevelopment v4, EarthCheck BPDS v5, LEED v5 BD+C and BREEAM International NC v6.0, superseded accept. Pick credentials to narrow it. Clear selection

EnviroDevelopment v4

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Materials 4.2.5(b) Structure: non-structural steel. Same clause in all ten typology sections: Masterplanned Communities, Residential Subdivision, Seniors Living, Multi-Unit Residential, Mixed Use, Industrial, Retail, Education, Health and Aged Care, Commercial

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Environmental Product Declaration to EN15804
    Products
    non-structural steel
    Scope
    Built form structure option. It is an alternative to recycled content ≥15%. It applies to 80% of non-structural steel, a project quantity.
    Conditions
    • EPD to EN15804
    • product is non-structural steel
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

Materials 4.2.5(b), (e), (f) Structure: EPD to EN15804 options for non-structural steel, structural timber and bricks. All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD Australasia

    Status
    Accepted as a kind of credential
    Edition named
    Not stated by the tool
    Products
    non-structural steel; structural timber; bricks
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

  • International EPD System

    Status
    Accepted as a kind of credential
    Edition named
    Not stated by the tool
    Products
    non-structural steel; structural timber; bricks
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified
    On what basis
    certified to FSC (Forest Stewardship Council) standard
    Products
    structural timber
    Scope
    Built form structure option. It is an alternative to PEFC/AFS or an EPD to EN15804.
    Conditions
    product is structural timber
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified
    On what basis
    certified to a PEFC standard
    Products
    structural timber
    Scope
    Built form structure option. It is an alternative to FSC or an EPD to EN15804.
    Conditions
    product is structural timber
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

  • Responsible Wood

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified
    On what basis
    certified to AFS (Australian Forestry Standard), named as an example of a PEFC standard
    Products
    structural timber
    Scope
    Built form structure option.
    Conditions
    product is structural timber
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307, 317

Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. Same treatment in all ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Environmental Product Declaration to EN15804
    Products
    structural timber
    Scope
    Built form structure option. It is an alternative or addition to PEFC/AFS/FSC certification.
    Conditions
    • EPD to EN15804
    • product is structural timber
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

Materials 4.2.5(f) Structure: bricks. Lettered 4.2.5(e) in Residential Subdivision. Same treatment in all ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    Environmental Product Declaration to EN15804
    Products
    bricks
    Scope
    Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
    Conditions
    • EPD to EN15804
    • product is bricks
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307

Materials 4.2.6(a) Envelope / linings: timber window frames. All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    accredited/endorsed
    Products
    timber window frames
    Scope
    Building envelope option.
    Conditions
    product is timber window frames
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307

  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    accredited/endorsed
    Products
    timber window frames
    Scope
    Building envelope option.
    Conditions
    product is timber window frames
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307

  • Responsible Wood

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    accredited/endorsed
    On what basis
    AFS given as an example of PEFC
    Products
    timber window frames
    Scope
    Building envelope option.
    Conditions
    product is timber window frames
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307

Materials 4.2.8(b) Furniture, fixtures, equipment and finishes: carpet. Lettered 4.2.8(e) in Mixed Use. All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • Carpet Institute

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    level 2 or greater · level
    On what basis
    Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
    Products
    carpet
    Scope
    Furniture, fixtures, equipment and finishes option. Minimum 50% of the carpet is a project threshold.
    Conditions
    Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307).
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307

Materials 4.2.8(c) Furniture, fixtures, equipment and finishes: joinery. Lettered 4.2.8(f) in Mixed Use. All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified/endorsed
    Products
    joinery
    Scope
    Furniture, fixtures, equipment and finishes option.
    Conditions
    product is joinery
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307

  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified/endorsed
    Products
    joinery
    Scope
    Furniture, fixtures, equipment and finishes option.
    Conditions
    product is joinery
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307

  • Responsible Wood

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    certified/endorsed
    On what basis
    AFS given as an example of PEFC
    Products
    joinery
    Scope
    Furniture, fixtures, equipment and finishes option.
    Conditions
    product is joinery
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307

Materials 4.2.9 Alternative compliance (4.2.8 in Commercial). All ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD Australasia

    Status
    Accepted as a kind of credential
    Edition named
    Not stated by the tool
    Products
    procured materials (any)
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

  • International EPD System

    Status
    Accepted as a kind of credential
    Edition named
    Not stated by the tool
    Products
    procured materials (any)
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

Materials 4.2.9 Alternative compliance (EPDs and/or certifications). Printed as 4.2.8 in Commercial. Same treatment in all ten typology sections.

EnviroDevelopment v4 · National Technical Standards; version and date not printed on the supplied pages

  • EPD

    Status
    Accepted
    Edition named
    Not stated by the tool
    Products
    procured materials (any)
    Scope
    Alternative “compliance” (EnviroDevelopment’s word) route. 80% of procured materials is a project threshold. No EN15804 requirement is stated in this option.
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

EarthCheck BPDS v5

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

30 Sustainable Materials Selection and Arrangement, 30.1 Green rating/eco-label schemes

EarthCheck BPDS v5 · Version 5 (date not printed on pages 16, 17, 75-77)

  • Blue Angel

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75

  • Carpet Institute

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Floorings (if a carpet product)
    Scope
    Counts only for the listed material categories.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75

  • Eco Choice Aotearoa

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75

  • EU Ecolabel

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75

  • GECA

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75

  • Global GreenTag

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75

  • Green Seal

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75

  • Nordic Swan

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75

  • SCS Standards

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Counts only for the listed material categories.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75

30.1 Guidance: fallback where no formal rating is available for a material

EarthCheck BPDS v5 · Version 5 (date not printed on pages 16, 17, 75-77)

  • EPD

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Not shown under EarthCheck Pty Ltd's terms
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75

  • EPD Australasia

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Not shown under EarthCheck Pty Ltd's terms
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75

  • International EPD System

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Not shown under EarthCheck Pty Ltd's terms
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75

LEED v5 BD+C

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

MRc2

LEED v5 BD+C · LEED BD+C: New Construction v5, MRc2 Reduce Embodied Carbon web page (printed 4/9/2026)

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1–3 POINTS · points
    On what basis
    project whole-project weighted-average GWP reduction against industry averages (Table 1)
    Products
    structure, enclosure and hardscape materials
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc2 · p. 2, 3

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1–2 POINTS NEW CONSTRUCTION · points
    On what basis
    number of material categories below industry benchmarks (Table 1: three categories 1 point; five or more 2 points)
    Products
    structure, enclosure and hardscape materials
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc2 · p. 3

  • EPD Australasia

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    1–3 POINTS · points
    On what basis
    project GWP reduction against industry averages (Table 1)
    Products
    structure, enclosure and hardscape materials
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc2 · p. 2, 3

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    1–3 POINTS · points
    On what basis
    project GWP reduction against industry averages (Table 1)
    Products
    structure, enclosure and hardscape materials
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc2 · p. 2, 3

MRc4

LEED v5 BD+C · Criteria Areas & Achievement Levels in LEED v5, Version 1.3, February 2026 (updated February 24, 2026)

  • Concrete Sustainability Council

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Plant Bronze: 1
    • Plant Silver: 2
    • Plant Gold or Platinum: 3
    • CO2 Module 1 Star: 1
    • CO2 Module 2, 3 or 4 Stars: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health, Social Health & Equity
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    concrete
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 4

  • Certified (v3.1, v4.0/4.1)

    Status
    Accepted with conditions
    Edition named
    v3.1, v4.0/4.1Not all current editions: Klar Cite holds v5.0 as current
    Level
    • Bronze v3.1: 1+
    • Bronze v4.0/4.1: 2+
    • Silver v3.1: 3+
    • Silver v4.0/4.1: 5
    • Gold v3.1: 5
    • Gold v4.0/4.1: 5
    • Platinum v3.1: 5
    • Platinum v4.0/4.1: 5
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health, Climate Health, Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-001: the tool reads two ways (p. 17 and p. 4); the combined score is Table 1's (p. 4; owner, 28 Oct 2026)
    Source
    LEED v5 BD+C · MRc4 · p. 4

  • Certified Circularity (v4.1)

    Status
    Accepted with conditions
    Edition named
    v4.1Not the current edition: Klar Cite holds v5.0 as current
    Level
    • Bronze: 1+
    • Silver: 2
    • Gold: 3
    • Platinum: 4
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 4

  • Material Health Certificate (v3.1/v4.0/v4.1)

    Status
    Accepted with conditions
    Edition named
    v3.1/v4.0/v4.1Not the current edition: Klar Cite holds v5.0 as current
    Level
    • Bronze: 1
    • Silver: 2
    • Gold: 3
    • Platinum: 3
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 4

  • version 2.0; v2.0 or later

    Status
    Accepted with conditions
    Edition named
    v2.0
    Level
    • Declare v2.0: 1
    • Red List Free or Approved, third-party “verified”: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • EPD Australasia

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • FSC Recycled: 2
    • FSC Mix: 4
    • FSC 100%: 5
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • Global GreenTag

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Product Health Declaration: 2 · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-003: the tool reads two ways (p. 6 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • Green Seal

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    GS-11: 2 · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    products in GS-11 scope (standard scope not stated by the tool)
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • pre-checked, 1,000 ppm: 1
    • third-party “verified”, 100 ppm: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • PEFC Recycled: 2
    • PEFC Certified: 3
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • Responsible Wood

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • PEFC Recycled: 2
    • PEFC Certified: 3
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • SCS Standards

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Legal sourcing with disclosure: 1 · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 5).
    Source
    LEED v5 BD+C · MRc4 · p. 5

  • Sustainable Forestry Initiative

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • 100% recycled: 2
    • forestry and recycled: 2
    • forestry: 3
    • 100% certified forest: 4
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-004: the tool reads two ways (p. 15 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026); SC-005: the tool reads two ways (p. 19, 20 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
    Source
    LEED v5 BD+C · MRc4 · p. 5

BREEAM International NC v6.0, superseded

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Mat 01

BREEAM International NC v6.0, superseded · Technical Manual – Version 6.0.0 – 01/12/2021 – SD250

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    per product covered by an EPD that BREEAM calls “verified”
    Products
    construction products, classified by Mat 03 Table 46 material categories
    Scope
    Not shown under BRE Global Ltd's terms
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279

  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    On what basis
    per product covered by a manufacturer specific EPD that BREEAM calls “verified”
    Products
    construction products, classified by Mat 03 Table 46 material categories
    Scope
    Not shown under BRE Global Ltd's terms
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278

  • EPD Australasia

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    On what basis
    per product covered by an EPD that BREEAM calls “verified”
    Products
    construction products, classified by Mat 03 Table 46 material categories
    Scope
    Only two EPDs per classification group may be counted.
    The rule
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279

  • EPD Australasia

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    On what basis
    per product covered by a manufacturer specific EPD that BREEAM calls “verified”
    Products
    construction products, classified by Mat 03 Table 46 material categories
    Scope
    Exemplary level only. Only two EPDs per classification group may be counted.
    The rule
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    On what basis
    per product covered by an EPD that BREEAM calls “verified”
    Products
    construction products, classified by Mat 03 Table 46 material categories
    Scope
    Only two EPDs per classification group may be counted.
    The rule
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279

  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    On what basis
    per product covered by a manufacturer specific EPD that BREEAM calls “verified”
    Products
    construction products, classified by Mat 03 Table 46 material categories
    Scope
    Exemplary level only. Only two EPDs per classification group may be counted.
    The rule
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279

Mat 03

BREEAM International NC v6.0, superseded · Technical Manual – Version 6.0.0 – 01/12/2021 – SD250; Guidance Note 18 V3.7 May 2023

  • 'ASI Certified Performance', with 'ASI Certified Chain of Custody'

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    aluminium (metal)
    Scope
    In-scope products above the cut-off volume (CN3.3). Downstream organisations without certification must “meet” (BREEAM’s word) the broken chain rules (CN3.4).
    Conditions
    • both ASI Certified Performance and ASI Certified Chain of Custody
    • provisional certification does not count
    • aluminium originates from a casthouse that is a certified ASI Member and/or a subsequent supplier that is a certified ASI Member
    • additional requirement included in project documents and evidence that installed products fulfil it
    • product “compliant” (BREEAM’s word) with broken chain requirements (CN3.4) where downstream organisations lack their own certification
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 292, 293 (manual); 2, 3 (GN18)

  • BES 6001

    Status
    Accepted with conditions
    Edition named
    All (Issue 3)
    Level
    5 (Baseline score3) · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    not limited by the tool
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    BES 6001 Issue 3
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 284, 285, 293 (manual); 2, 3 (GN18)

  • BES 6001

    Status
    Accepted with conditions
    Edition named
    All (Issue 4)
    Level
    6 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    not limited by the tool
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    BES 6001 Issue 4
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 7 (GN18)

  • BES 6001

    Status
    Accepted with conditions
    Edition named
    All (Issue 4)
    Level
    7 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    not limited by the tool
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 3, 7 (GN18)

  • All

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    constructional steel
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    • certified under the CARES Sustainable Constructional Steel Scheme
    • scores zero where the product is non-“compliant” (BREEAM’s word) with the broken chain requirements (Step 1.3, p. 285): organisations downstream of the certified one may lack their own certification only if they only handle or transport, or only fabricate, assemble or install under a recognised quality management system that prevents mixing with uncertified sources and operate in a jurisdiction with robust, well-enforced environmental, social and economic controls (CN3.4, p. 284)
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 284, 285, 293 (manual); 1, 2 (GN18)

  • Certified concrete (bronze level)

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    4 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    concrete
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    CSC certified concrete at bronze level
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)

  • Certified concrete (silver level)

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    concrete
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    CSC certified concrete at silver level
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)

  • Certified concrete (gold level)

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    6 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    concrete
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    CSC certified concrete at gold level
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)

  • Certified concrete (platinum level)

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    7 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    concrete
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    CSC certified concrete at platinum level
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 7 (GN18)

  • FSC

    Status
    Accepted with conditions
    Edition named
    'FSC 100%'
    Level
    7 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    timber and timber-based products
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    FSC 100% label
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)

  • 'FSC Mix' 'FSC Recycled'

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    timber and timber-based products
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    FSC Mix or FSC Recycled label
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)

  • PEFC

    Status
    Accepted with conditions
    Edition named
    'PEFC Certified - 100% PEFC Origin'
    Level
    7 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    timber and timber-based products
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    PEFC Certified - 100% PEFC Origin label
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 7 (GN18)

  • 'PEFC Certified' 'PEFC Recycled'

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    timber and timber-based products
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    PEFC Certified or PEFC Recycled label
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2 (GN18)

  • 'SFI Certified Chain of Custody, Promoting Sustainable Forestry'

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    6 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    timber and timber-based products
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 3 (GN18)

  • 'SFI Certified Chain of Custody, Promoting Sustainable Forestry'

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    5 · RSCS summary score level (scale 1 to 10)
    On what basis
    per construction product, entered in the BREEAM International Mat 03 tool
    Products
    timber and timber-based products
    Scope
    In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
    Conditions
    Not shown under BRE Global Ltd's terms
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 3 (GN18)

Mat 03

BREEAM International NC v6.0, superseded · Technical Manual – Version 6.0.0 – 01/12/2021 – SD250

  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Products
    timber and timber-based products
    Scope
    Prerequisite evidence only, not scored.
    Conditions
    • named as an example of certification for legally harvested and traded timber
    • evidence listed for the interim design stage
    • final post-construction stage needs documentary evidence that all timber used is legally harvested and traded
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 291

  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Products
    timber and timber-based products
    Scope
    Prerequisite evidence only, not scored.
    Conditions
    • named as an example of certification for legally harvested and traded timber
    • evidence listed for the interim design stage
    • final post-construction stage needs documentary evidence that all timber used is legally harvested and traded
    Source
    BREEAM International NC v6.0, superseded · Mat 03 · p. 291