Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

What EarthCheck BPDS v5, LEED v5 ID+C and LEED v4.1 ID+C accept. Pick credentials to narrow it. Clear selection

EarthCheck BPDS v5

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

30 Sustainable Materials Selection and Arrangement, 30.1 Green rating/eco-label schemes

EarthCheck BPDS v5 · Version 5 (date not printed on pages 16, 17, 75-77)

  • Blue Angel

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • Carpet Institute

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Floorings (if a carpet product)
    Scope
    Counts only for the listed material categories.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75
  • Eco Choice Aotearoa

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • EU Ecolabel

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • GECA

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • Global GreenTag

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • Green Seal

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • Nordic Swan

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    On what basis
    Not shown under EarthCheck Pty Ltd's terms
    Products
    Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
    Scope
    Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    Source
    EarthCheck BPDS v5 · p. 75
  • SCS Standards

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Counts only for the listed material categories.
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75

30.1 Guidance: fallback where no formal rating is available for a material

EarthCheck BPDS v5 · Version 5 (date not printed on pages 16, 17, 75-77)

  • EPD

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Not shown under EarthCheck Pty Ltd's terms
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75
  • EPD Australasia

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Not shown under EarthCheck Pty Ltd's terms
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75
  • International EPD System

    Status
    Accepted as an owner ruling
    Edition named
    Not stated by the tool
    Level
    4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
    Products
    Material categories listed in the 30.1 guidance
    Scope
    Not shown under EarthCheck Pty Ltd's terms
    The rule
    Not shown under EarthCheck Pty Ltd's terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
    Source
    EarthCheck BPDS v5 · p. 75

LEED v5 ID+C

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

MRc4

LEED v5 ID+C · Criteria Areas & Achievement Levels in LEED v5, Version 1.3, February 2026 (updated February 24, 2026); MRc4 ID+C credit page printed 4/9/2026

  • Concrete Sustainability Council

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Plant Bronze: 1
    • Plant Silver: 2
    • Plant Gold or Platinum: 3
    • CO2 Module 1 Star: 1
    • CO2 Module 2, 3 or 4 Stars: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health, Social Health & Equity
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    concrete
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 4
  • Certified (v3.1, v4.0/4.1)

    Status
    Accepted with conditions
    Edition named
    v3.1, v4.0/4.1Not all current editions: Klar Cite holds v5.0 as current
    Level
    • Bronze v3.1: 1+
    • Bronze v4.0/4.1: 2+
    • Silver v3.1: 3+
    • Silver v4.0/4.1: 5
    • Gold v3.1: 5
    • Gold v4.0/4.1: 5
    • Platinum v3.1: 5
    • Platinum v4.0/4.1: 5
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health, Climate Health, Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-001: the tool reads two ways (p. 17 and p. 4); the combined score is Table 1's (p. 4; owner, 28 Oct 2026)
    Source
    LEED v5 ID+C · MRc4 · p. 4
  • Certified Circularity (v4.1)

    Status
    Accepted with conditions
    Edition named
    v4.1Not the current edition: Klar Cite holds v5.0 as current
    Level
    • Bronze: 1+
    • Silver: 2
    • Gold: 3
    • Platinum: 4
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 4
  • Material Health Certificate (v3.1/v4.0/v4.1)

    Status
    Accepted with conditions
    Edition named
    v3.1/v4.0/v4.1Not the current edition: Klar Cite holds v5.0 as current
    Level
    • Bronze: 1
    • Silver: 2
    • Gold: 3
    • Platinum: 3
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 4
  • version 2.0; v2.0 or later

    Status
    Accepted with conditions
    Edition named
    v2.0
    Level
    • Declare v2.0: 1
    • Red List Free or Approved, third-party “verified”: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • not named by the tool; industry-average (industrywide) Type III EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • EPD Australasia

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • FSC Recycled: 2
    • FSC Mix: 4
    • FSC 100%: 5
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • Global GreenTag

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Product Health Declaration: 2 · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-003: the tool reads two ways (p. 6 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 5).
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • Green Seal

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    GS-11: 2 · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • pre-checked, 1,000 ppm: 1
    • third-party “verified”, 100 ppm: 2
    · LEED multi-attribute score (max 5)
    Draws on
    Human Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 ID+C product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • PEFC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • PEFC Recycled: 2
    • PEFC Certified: 3
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • Responsible Wood

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • PEFC Recycled: 2
    • PEFC Certified: 3
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • SCS Standards

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Legal sourcing with disclosure: 1 · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 ID+C · MRc4 · p. 5
  • Sustainable Forestry Initiative

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    • Legal sourcing with disclosure: 1
    • 100% recycled: 2
    • forestry and recycled: 2
    • forestry: 3
    • 100% certified forest: 4
    · LEED multi-attribute score (max 5)
    Draws on
    Ecosystem Health, Social Health & Equity, Circular Economy
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Reads two ways
    SC-004: the tool reads two ways (p. 15 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026); SC-005: the tool reads two ways (p. 19, 20 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
    Source
    LEED v5 ID+C · MRc4 · p. 5

LEED v4.1 ID+C

Rating tool · what it accepts, credit by credit

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

MR Credit

LEED v4.1 ID+C · LEED v4.1 ID+C (no date printed on the supplied pages; file name gives v4.1, 2024-02-01)

  • standard version 3 or later

    Status
    Accepted with conditions
    Edition named
    v3
    Level
    Bronze level or higher · Material Health achievement level
    On what basis
    per product certificate
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 48
  • Cradle to Cradle Certified

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Bronze level or higher
    On what basis
    per product certificate
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50
  • Cradle to Cradle Certified

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Silver level or higher
    On what basis
    per product certificate
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50
  • Declare

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Red List Free, LBC Red List Free, or Declared · Declare label designation
    On what basis
    per product label
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 48
  • Declare

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    LBC Red List Approved or LBC Compliant · Declare label designation
    On what basis
    per product label
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 48
  • Declare

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Red List Free or LBC Red List Free · Declare label designation
    On what basis
    per product label
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50
  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    valued as one whole product · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 44
  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    valued as one whole product · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 44
  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    valued as 1.5 products · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 44
  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    ½ product; 1 product; 1.5 products; 2 products · products (credit achievement calculation)
    On what basis
    per product, by report type
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 45
  • EPD

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1 product · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
    Source
    LEED v4.1 ID+C · MR Credit · p. 45
  • EPD Australasia

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    valued as one whole product · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 44
  • EPD Australasia

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    valued as 1.5 products · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 44
  • EPD Australasia

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    ½ product; 1 product; 1.5 products; 2 products · products (credit achievement calculation)
    On what basis
    per product, by report type
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
    Source
    LEED v4.1 ID+C · MR Credit · p. 45
  • FSC

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    100% of product cost · % of product cost (credit achievement calculation)
    On what basis
    product cost
    Products
    wood products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 46
  • Global GreenTag

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    PHD issued from 2020 · label type and issue date
    On what basis
    per product label
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 48
  • Global GreenTag

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1 product · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50
  • Green Seal

    Status
    Accepted with conditions
    Edition named
    GS-11, Edition 4.0
    Level
    GS-11, Edition 4.0 · standard and edition
    On what basis
    per product
    Products
    paints, coatings, stains and sealers
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50
  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    complete HPD, hazards disclosed · disclosure completeness
    On what basis
    end use product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 48
  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1 product · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50
  • Health Product Declaration

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    1.5 products · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50
  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    valued as one whole product · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 44
  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    valued as 1.5 products · products (credit achievement calculation)
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 44
  • International EPD System

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Edition named
    Not stated by the tool
    Level
    ½ product; 1 product; 1.5 products; 2 products · products (credit achievement calculation)
    On what basis
    per product, by report type
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    How sure
    Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
    Source
    LEED v4.1 ID+C · MR Credit · p. 45
  • Living Product Challenge

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    inventory to 1,000 ppm · inventory threshold
    On what basis
    included Declare product label
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 48
  • Living Product Challenge

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Red List Free or LBC Red List Free · Declare label designation
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50
  • Living Product Challenge

    Status
    Accepted with conditions
    Edition named
    Not stated by the tool
    Level
    Imperative 09: Transparent Material Health · Living Product Challenge imperative
    On what basis
    per product
    Products
    permanently installed products
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    Conditions
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v4.1 ID+C · MR Credit · p. 50