Ratings & Policy
Find where a product credential earns points or counts, and what each rating tool or policy accepts.
Pick any rating tools or policies and any credentials. The results narrow to what you pick.
Australia and New Zealand
Which credential?
- Aluminium Stewardship Initiative
- BEP PVC
- BES 6001
- Blue Angel
- CARES Sustainable Constructional Steel
- Carpet Institute
- Climate Active
- Concrete Sustainability Council
- Cradle to Cradle Certified
- Declare
- Eco Choice Aotearoa
- EMICODE
- EPD
- EPD Australasia
- EU Ecolabel
- FSC
- GECA
- Global GreenTag
- Global Organic Textile Standard
- Global Responsible Textile Standard
- Green Seal
- Health Product Declaration
- International EPD System
- Living Product Challenge
- Nordic Swan
- PEFC
- Product Carbon Footprint
- Responsible Steel
- Responsible Wood
- SCS Standards
- Steel Sustainability Australia
- Sustainable Forestry Initiative
- UL GREENGUARD
- AFRDI Green Tick
- CDPH Standard Method
- CEN
- ISO
- LEVEL
- NaturePlus (GreenCollar)
- PACT
3 credentials, in every rating tool and policy. Clear selection
Global Responsible Textile Standard
Where it earns points or counts, rating tool by rating tool. About Global Responsible Textile Standard
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
IS Rating v2.1Rating tool
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
- Status
- Klar Cite hasn't checked this yet
- Named as
- Global Responsible Textile Standard
- Edition named
- Not stated by the tool
- Source
- IS Rating v2.1 · Rso-7 · p. 54
Not named by: NABERS Embodied Carbon v2.1 (pilot), Australian Government ESP Policy, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.
Product Carbon Footprint
Where it earns points or counts, rating tool by rating tool. About Product Carbon Footprint
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Green Star Responsible ProductsRating tool
Responsible Products Value(credit title not shown under Green Building Council of Australia's terms)
- Status
- Accepted
- Named as
- Product Carbon Footprint
- Edition named
- ISO 14067:2018 (Third-Party Verified)
- Earns
- Responsible Products Value 0–4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
NABERS Embodied Carbon v2.1 (pilot)Rating tool
10.4.2.1; 10.4.2.4 Finding stored biogenic carbon in a carbon footprint; 14.8.2
- Status
- Accepted with conditions
- Named as
- Product Carbon Footprint
- Edition named
- ISO 14067 or PAS 2050
- On what basis
- GHG biogenic removals
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only
- Conditions
- carbon footprint conforms to 9.4.4.1 (“compliant” (NABERS’s word) with ISO 14067 or PAS 2050; system boundary “equivalent” to EN 15804 or ISO 21930; refers directly to the material by unique product name or code; independently “verified”, verifier not involved in defining scope or conducting the LCA; dated within five years before the last delivery of the product to site)
- timber or paper material only
- confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- use the GHG biogenic removals value
- if not reported separately, estimate using 10.4.3
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 70, 94
9.4.2 a); 9.4.4.1 Conforming carbon footprint declarations; 9.4.4.2
- Status
- Accepted with conditions
- Named as
- ISO 14067 or PAS 2050 (Related documents list ISO 14067:2018)
- Edition named
- Related documents list ISO 14067:2018
- On what basis
- GHG total emissions, modules A1-A3, entered as GWPT
- Products
- Any included material
- Scope
- Overrides the default emission factor for that material; modules A1-A3
- Conditions
- follows ISO 14067 or PAS 2050
- system boundary matches the EN 15804 or ISO 21930 boundary
- names the material by unique product name or code
- independently “verified” (NABERS’s word) by a verifier not involved in defining the scope or conducting the LCA study
- dated within five years before the last delivery of the product to site
- unit matches the unit selected in the input form
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 9, 53, 61, 62
Australian Government ESP PolicyProcurement policy
Evaluation guidance – Products, 'Evidence of product sustainability' and 'Product Carbon Footprint'
- Status
- Accepted with conditions
- Named as
- Product Carbon Footprint
- Edition named
- ISO 14067
- On what basis
- listed as a way to verify sustainability
- Products
- FFE, ICT Goods, Textiles
- Scope
- Not named as gold standard (p. 5). The tool says a product with an EPD would be preferable (p. 6).
- Conditions
- “verified” (the ESP Policy’s word) by a third party
- measured to ISO 14067
- product footprint, not organisational footprint (not ISO 14064-1)
- Source
- Australian Government ESP Policy · p. 5, 6, 16
Homestar v5Rating tool
EN2 Embodied Carbon, Carbon Footprint Data and Bespoke carbon footprint calculation
- Status
- Accepted with conditions
- Named as
- Product Carbon Footprint
- Edition named
- Not stated by the tool
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. EN2 p. 3, 4).
- Source
- Homestar v5 · EN2 · EN2 p. 3, 4
EN3 Sustainable Materials, means of compliance 'CarboNZero product certification' (0.75) and 'CEMARS product certification' (0.25)
- Status
- Accepted with conditions
- Named as
- Product Carbon Footprint
- Edition named
- PAS 2050:2011
- Level
- 0.75 (CarboNZero product certification); 0.25 (CEMARS product certification) · points (EN3 Sustainable Materials, per material category; max 1.5 per category)
- Conditions
- Only through CarboNZero product certification (0.75) or CEMARS product certification (0.25), each being independent verification and certification that the product's carbon footprint is calculated to PAS 2050:2011. CarboNZero also requires: measures to manage, reduce and mitigate the product's net GHG emissions to zero; a commitment to an emissions management and reduction plan; and offsetting of remaining unavoidable emissions with carbon credits that Homestar calls “verified”. CEMARS also requires: lifecycle GHG emissions of the product measured; and a commitment to manage and reduce them under an emissions management and reduction plan. Points apply only where at least 50% of the material category content is reused, eco-preferred or responsibly sourced. Evidence: product data sheet or certificate demonstrating “compliance” (Homestar’s word). Where a product qualifies for several methods, the one with the most points is selected.
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. EN3 p. 11, 12).
- Source
- Homestar v5 · EN3 · EN3 p. 11, 12
Homestar v4.1, supersededRating tool
MAT-1 Table 21 CarboNZero product certification (1 point); CEMARS product certification (0.5 points)
- Status
- Accepted with conditions
- Named as
- Product Carbon Footprint
- Edition named
- PAS 2050:2011
- Level
- 1 (CarboNZero product certification); 0.5 (CEMARS product certification) · points (MAT-1 Sustainable Materials, per material category; max 2 per category)
- Products
- Any MAT-1 material category
- Conditions
- Only through CarboNZero product certification (1 point) or CEMARS product certification (0.5 points), each being independent verification and certification that the product's carbon footprint is calculated to PAS 2050:2011. CarboNZero also requires: measures to manage, reduce and mitigate the product's net GHG emissions to zero; a commitment to an emissions management and reduction plan; and offsetting of remaining unavoidable emissions with carbon credits that Homestar calls “verified”. CEMARS also requires: the product's lifecycle GHG emissions measured; and a commitment to manage and reduce them under an emissions management and reduction plan. Points apply only where at least 50% of the total material content of the category is reused, eco-preferred or responsibly sourced. Evidence: datasheets and/or the third-party verification scheme certificate.
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. MAT p. 1, 3, 6-7).
- Source
- Homestar v4.1, superseded · MAT-1 · MAT p. 1, 3, 6-7
Not named by: IS Rating v2.1, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.
Responsible Wood
Where it earns points or counts, rating tool by rating tool. About Responsible Wood
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Green Star Responsible ProductsRating tool
Responsible Products Value(credit title not shown under Green Building Council of Australia's terms)
- Status
- Accepted
- Named as
- Responsible Wood
- Edition named
- AS-NZS 4708:2021 and 4707:2021
- Earns
- Responsible Products Value 10–14 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
NABERS Embodied Carbon v2.1 (pilot)Rating tool
10.4.1; 10.4.4 (default emission factor); 14.8.2
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Products
- Timber and paper materials
- Scope
- Stored biogenic carbon in the Carbon Removal Indicator only
- Conditions
- timber or paper material only
- Responsible Wood certification as part of PEFC
- retain certification details including licence number
- where an EPD states the certified share, at least 95 % is acceptable
- with a default emission factor, select 'sustainable forest certified' in the input form
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 72, 94
IS Rating v2.1Rating tool
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
- Status
- Klar Cite hasn't checked this yet
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Source
- IS Rating v2.1 · Rso-7 · p. 54
Australian Government ESP PolicyProcurement policy
Evaluation guidance – Products, Table 1 (row 'Responsible Wood')
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- FFE products only
- Source
- Australian Government ESP Policy · p. 11
EnviroDevelopment v4Rating tool
Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. All ten typology sections.
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Level
- certified
- On what basis
- certified to AFS (Australian Forestry Standard), named as an example of a PEFC standard
- Products
- structural timber
- Scope
- Built form structure option.
- Conditions
- product is structural timber
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307, 317
Materials 4.2.6(a) Envelope / linings: timber window frames. All ten typology sections.
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Level
- accredited/endorsed
- On what basis
- AFS given as an example of PEFC
- Products
- timber window frames
- Scope
- Building envelope option.
- Conditions
- product is timber window frames
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 134, 166, 197, 223, 250, 278, 307
Materials 4.2.8(c) Furniture, fixtures, equipment and finishes: joinery. Lettered 4.2.8(f) in Mixed Use. All ten typology sections.
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Level
- certified/endorsed
- On what basis
- AFS given as an example of PEFC
- Products
- joinery
- Scope
- Furniture, fixtures, equipment and finishes option.
- Conditions
- product is joinery
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 134, 167, 197, 223, 250, 278, 307
LEED v5 BD+CRating tool
MRc4 · Ecosystem Health(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 13
MRc4 · Ecosystem Health(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 15
MRc4 · Social Health & Equity(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 17
LEED v5 ID+CRating tool
Ecosystem Health(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 ID+C · p. 13, 15
Ecosystem Health(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 ID+C · p. 15
Social Health & Equity(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Responsible Wood
- Edition named
- Not stated by the tool
- Level
- Not shown under U.S. Green Building Council, Inc.'s terms
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 ID+C · p. 17
Not named by: Homestar v5, Homestar v4.1, superseded, EarthCheck BPDS v5, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.