Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

Australia and New Zealand

International

4 credentials, in every rating tool and policy. Clear selection

EPD Australasia

Where it earns points or counts, rating tool by rating tool. About EPD Australasia

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Counts towards Responsible Products Value

EPD Australasia – Industry-average EPD
Status
Accepted
Edition named
Not stated by the tool
Earns
Responsible Products Value 1 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
EPD Australasia – Product-specific EPD
Status
Accepted
Edition named
Not stated by the tool
Earns
Responsible Products Value 7 · Green Star increases Responsible Product Values for EPDs, 12 Dec 2025
Source
Green Star Responsible Products · Responsible Products Value

NABERS Embodied Carbon v2.1 (pilot)Rating tool

9.4.3.1 Conforming EPDs (example)
Status
Accepted with conditions
Named as
EPD Australasia
Edition named
Not stated by the tool
On what basis
GWPT, modules A1-A3
Products
Any included material with a product-specific EPD
Scope
Same scope as the EPD rows (emission factor, industry average, stored carbon)
Conditions
- each EPD “meets” (NABERS’s word) the 9.4.3.1 conditions
- use the EPD version valid at the time of delivery to site, obtained from the manufacturer if the online version is newer
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 59

IS Rating v2.1Rating tool

Counts towards Rso-7

EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
0.75 · Sustainability Factor (SF)
On what basis
Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
Products
materials and products (any category)
Scope
Not shown under Infrastructure Sustainability Council's terms
The rule
Not shown under Infrastructure Sustainability Council's terms
Source
IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57, 59
EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
0.50 · Sustainability Factor (SF)
On what basis
Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
Products
materials and products (any category)
Scope
Not shown under Infrastructure Sustainability Council's terms
The rule
Not shown under Infrastructure Sustainability Council's terms
Source
IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57, 59

Australian Government ESP PolicyProcurement policy

SESP Template – Products, 'Products have a lower environmental footprint'; Evaluation guidance – Products, 'Evidence of product sustainability'
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
Products
FFE, ICT Goods, Textiles
Scope
The rule is on the EPD; class membership is on the programme.
The rule
- EPD “verified” (the ESP Policy’s word) by a third party
- EPD to ISO 14025
Source
Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5, 6

Homestar v5Rating tool

EN2 Embodied Carbon, Credit Criteria, definition of verified embodied carbon data
Status
Accepted with conditions
Named as
EPD Australasia
Edition named
Not stated by the tool
Products
not stated by the tool
Scope
Context is exemptions for individual assemblies at 6 and 7 Homestar where data that Homestar calls “verified” is not available.
Conditions
Not shown under New Zealand Green Building Council's terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. EN2 p. 1).
Source
Homestar v5 · EN2 · EN2 p. 1
EN3 Sustainable Materials, EPD industry-wide; Additional Guidance on EPDs
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
Level
0.75 point · points per material category
On what basis
industry-wide EPD format
Products
not stated by the tool
The rule
Not shown under New Zealand Green Building Council's terms
Source
Homestar v5 · EN3 · EN3 p. 10, 12
EN3 Sustainable Materials, EPD product-specific; Additional Guidance on EPDs
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
Level
1.25 points · points per material category
On what basis
product-specific EPD format
Products
not stated by the tool
The rule
- product-specific EPD that Homestar calls “third-party verified”
- independently audited
- cradle-to-gate scope as a minimum
Source
Homestar v5 · EN3 · EN3 p. 10, 12

Homestar v4.1, supersededRating tool

MAT-1 Table 21 Environmental product Declaration; industry-wide EPD
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
Level
1 · MAT-1 points per material category
On what basis
Industry wide EPD
Products
Any MAT-1 material category
The rule
- industry-wide EPD
- independently audited
- cradle-to-gate scope at minimum
- manufacturer recognised as a participant in the EPD
Source
Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7
MAT-1 Table 21 Environmental product Declaration; product-specific EPD
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
Level
1.5 · MAT-1 points per material category
On what basis
Product Specific EPD
Products
Any MAT-1 material category
The rule
- product-specific EPD
- independently audited
- cradle-to-gate scope at minimum
Source
Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7

EnviroDevelopment v4Rating tool

Materials 4.2.5(b), (e), (f) Structure: EPD to EN15804 options for non-structural steel, structural timber and bricks. All ten typology sections.
Status
Accepted as a kind of credential
Named as
EPD Australasia
Edition named
Not stated by the tool
Products
non-structural steel; structural timber; bricks
The rule
Not recorded
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.9 Alternative compliance (4.2.8 in Commercial). All ten typology sections.
Status
Accepted as a kind of credential
Named as
EPD Australasia
Edition named
Not stated by the tool
Products
procured materials (any)
The rule
Not recorded
Source
EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

EarthCheck BPDS v5Rating tool

30.1 Guidance: fallback where no formal rating is available for a material
Status
Accepted as an owner ruling
Named as
EPD Australasia
Edition named
Not stated by the tool
Level
4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
Products
Material categories listed in the 30.1 guidance
Scope
Not shown under EarthCheck Pty Ltd's terms
The rule
Not shown under EarthCheck Pty Ltd's terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
Source
EarthCheck BPDS v5 · p. 75

LEED v5 BD+CRating tool

MRc2(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
Level
1–3 POINTS · points
On what basis
project GWP reduction against industry averages (Table 1)
Products
structure, enclosure and hardscape materials
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc2 · p. 2, 3
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
· LEED multi-attribute score (max 5)
Draws on
Climate Health, Ecosystem Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
· LEED multi-attribute score (max 5)
Draws on
Climate Health, Ecosystem Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 ID+C product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 ID+C · MRc4 · p. 5

LEED v4.1 BD+CRating tool

Counts towards MR Credit

EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per permanently installed product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 96
EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
one whole product · products counted toward credit achievement
On what basis
per permanently installed product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 96
EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
½ product · products counted toward credit achievement
On what basis
per product with an action plan
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
1 product · products counted toward credit achievement
On what basis
per product with an optimization report
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per product with an optimization report
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
2 products · products counted toward credit achievement
On what basis
per product with an optimization report
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per product
Products
products under the Furniture and Medical Furnishings credit
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 106
EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
one whole product · products counted toward credit achievement
On what basis
per product
Products
products under the Furniture and Medical Furnishings credit
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 106

LEED v4.1 ID+CRating tool

Counts towards MR Credit

EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
valued as one whole product · products (credit achievement calculation)
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 44
EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
valued as 1.5 products · products (credit achievement calculation)
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 44
EPD Australasia
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Edition named
Not stated by the tool
Level
½ product; 1 product; 1.5 products; 2 products · products (credit achievement calculation)
On what basis
per product, by report type
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
The rule
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
Source
LEED v4.1 ID+C · MR Credit · p. 45

BREEAM International NC v7.1Rating tool

Mat 02 Environmental product declarations, Table 74 Validity
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
Level
0.5 (EPD for more than one product in the same product category, more than one manufacturer) / 0.75 (more than one product, single manufacturer) / 1.5 (single product or colour/pattern variations, single manufacturer) · EPD points
On what basis
Per EPD, by EPD type (0.5 / 0.75 / 1.5, see EPD rows)
Products
Construction products
The rule
- EPD unexpired at the point of specification
- Product installed in the building by the end of construction
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- EPD not pending verification at the time of specification (CN2)
Source
BREEAM International NC v7.1 · Mat 02 · p. 304

BREEAM International NC v6.0, supersededRating tool

Mat 01 Life cycle impacts, criterion 5; CN3.2; Relevant definitions
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
On what basis
per product covered by an EPD that BREEAM calls “verified”
Products
construction products, classified by Mat 03 Table 46 material categories
Scope
Only two EPDs per classification group may be counted.
The rule
Not shown under BRE Global Ltd's terms
Source
BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
Mat 01 Life cycle impacts, exemplary level criterion 7; CN3.2
Status
Accepted as an ISO 14025 Type III EPD programme (own statement)
Named as
EPD Australasia
Edition named
Not stated by the tool
On what basis
per product covered by a manufacturer specific EPD that BREEAM calls “verified”
Products
construction products, classified by Mat 03 Table 46 material categories
Scope
Exemplary level only. Only two EPDs per classification group may be counted.
The rule
Not shown under BRE Global Ltd's terms
Source
BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279

Not named by: WELL v2.

Read EPD Australasia’s requirements →

ISO

Where it earns points or counts, rating tool by rating tool. About ISO

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

No rating tool or policy in Klar Cite names ISO. That is not a statement that none accepts it.

Read ISO’s requirements →

Living Product Challenge

Where it earns points or counts, rating tool by rating tool. About Living Product Challenge

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Counts towards Responsible Products Value

Living Product Challenge
Status
Accepted
Edition named
Living Product Challenge 2.0 - Imperative Certification
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Living Product Challenge
Status
Accepted
Edition named
Living Product Challenge 2.0 - Petal Certification
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Living Product Challenge
Status
Accepted
Edition named
Living Product Challenge 2.0 - Full Certification
Earns
Responsible Products Value 27 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value

Australian Government ESP PolicyProcurement policy

Evaluation guidance – Products, Table 1 (row 'Living Product Challenge')
Status
Accepted with conditions
Named as
Living Product Challenge
Edition named
Not stated by the tool
On what basis
listed as an example in Table 1
Products
FFE, Textiles
Scope
Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
Conditions
FFE or Textiles products only
Source
Australian Government ESP Policy · p. 11

LEED v4.1 BD+CRating tool

Counts towards MR Credit

Living Product Challenge
Status
Accepted with conditions
Edition named
Not stated by the tool
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 101
Living Product Challenge
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1 product · products counted toward credit achievement
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 102
Living Product Challenge
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 102

LEED v4.1 ID+CRating tool

Counts towards MR Credit

Living Product Challenge
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
inventory to 1,000 ppm · inventory threshold
On what basis
included Declare product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 48
Living Product Challenge
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Red List Free or LBC Red List Free · Declare label designation
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 50
Living Product Challenge
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Imperative 09: Transparent Material Health · Living Product Challenge imperative
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 50

WELL v2Rating tool

Counts towards X08 Materials Optimization, Part 2 Select Optimized Products

Living Product Challenge (Materials and Health & Happiness Petals) or Living Product Certification
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1 Point · points
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 15 distinct products.
Conditions
- Counts toward at least 15 distinct permanently installed products, furniture and task and floor lamps certified under a listed program
- Living Product Challenge route requires the Materials and Health & Happiness Petals
Source
WELL v2 · X08 (materials/feature/8)
Living Product Challenge, Materials and Health & Happiness Petals
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Materials and Health & Happiness Petals · Petals
On what basis
Living Product Challenge petals
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 15 distinct products.
Conditions
Materials Petal and Health & Happiness Petal achieved
Source
WELL v2 · X08 (materials/feature/8)

Living Building Challenge 4.1Rating tool · 4.1 Program Manual (January 2026)

I12 Responsible Materials (Core Imperative) · Living Product Challenge Certification Requirement
Status
Accepted with conditions
Named as
Living Product Challenge
Edition named
Not stated by the tool
Conditions
Not shown under International Living Future Institute (ILFI)'s terms
I12 Responsible Materials (Core Imperative) · Definition of Multipliers
Status
Accepted with conditions
Named as
Living Product Challenge
Edition named
Not stated by the tool
Conditions
Not shown under International Living Future Institute (ILFI)'s terms
I14-4 Responsible Sourcing · Living Product Challenge Requirement
Status
Accepted with conditions
Named as
Living Product Challenge
Edition named
Not stated by the tool
Conditions
Not shown under International Living Future Institute (ILFI)'s terms

Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v5 BD+C, LEED v5 ID+C, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read Living Product Challenge’s requirements →

SCS Standards

Where it earns points or counts, rating tool by rating tool. About SCS Standards

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Homestar v5Rating tool

HC7 Healthy Materials, methods (2) floor coverings and (3) engineered wood; Recognised list, Indoor Air Quality Schemes row 'SCS Indoor Avantage Gold'
Status
Accepted with conditions
Named as
SCS Standards
Edition named
Not stated by the tool
On what basis
product within the VOC limits set by the recognised IAQ scheme; listed as Gold
Products
Engineered Wood Products (VOC/Formaldehyde); Flooring (VOC)
Scope
Dots only in the EWP and Flooring MAT-2/HC7 columns. No dot for adhesives, coatings or any EN3 column.
Conditions
- Indoor Advantage Gold level
- usable for VOC or formaldehyde criteria only
- certificate must be for the final product; a component certificate needs a Technical Question
Source
Homestar v5 · HC7 · List p. 1; HC7 p. 1, 2

Homestar v4.1, supersededRating tool

MAT-1 Sustainable Materials (Product Sustainability columns)
Status
Excluded by the tool under this credit
Named as
SCS Standards
Edition named
Not stated by the tool
Products
All MAT-1 categories
Scope
Applies to SCS Indoor Advantage Gold; other SCS programmes not mentioned
Source
Homestar v4.1, superseded · MAT-1 · List p. 1
MAT-2 (3) floor coverings and (4) engineered wood via Indoor Air Quality Schemes
Status
Accepted with conditions
Named as
SCS Standards
Edition named
Not stated by the tool
On what basis
Recognised Indoor Air Quality Scheme; MAT-2 awards 1 point per criteria area where 50% of products “comply” (Homestar’s word); listed as SCS Indoor Avantage Gold
Products
Engineered wood; floor coverings
Scope
Not marked for adhesives, sealants or applied coatings
Conditions
- Indoor Advantage Gold
- VOC or formaldehyde criteria only
- engineered wood and floor coverings only
- certificate for the final product
Source
Homestar v4.1, superseded · MAT-2 · List p. 1; MAT p. 10-11

EarthCheck BPDS v5Rating tool

30 Sustainable Materials Selection and Arrangement, 30.1 Green rating/eco-label schemes
Status
Accepted as an owner ruling
Named as
SCS Standards
Edition named
Not stated by the tool
Level
4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
Products
Material categories listed in the 30.1 guidance
Scope
Counts only for the listed material categories.
The rule
Not shown under EarthCheck Pty Ltd's terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
Source
EarthCheck BPDS v5 · p. 75

LEED v5 BD+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
SCS Standards
Edition named
Not stated by the tool
Level
Legal sourcing with disclosure: 1 · LEED multi-attribute score (max 5)
Draws on
Ecosystem Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
wood products
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 5).
Source
LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
SCS Standards
Edition named
Not stated by the tool
Level
Legal sourcing with disclosure: 1 · LEED multi-attribute score (max 5)
Draws on
Ecosystem Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
wood products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 ID+C · MRc4 · p. 5

Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, Australian Government ESP Policy, EnviroDevelopment v4, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read SCS Standards’s requirements →