Ratings & Policy
Find where a product credential earns points or counts, and what each rating tool or policy accepts.
Pick any rating tools or policies and any credentials. The results narrow to what you pick.
Australia and New Zealand
Which credential?
- Aluminium Stewardship Initiative
- BEP PVC
- BES 6001
- Blue Angel
- CARES Sustainable Constructional Steel
- Carpet Institute
- Climate Active
- Concrete Sustainability Council
- Cradle to Cradle Certified
- Declare
- Eco Choice Aotearoa
- EMICODE
- EPD
- EPD Australasia
- EU Ecolabel
- FSC
- GECA
- Global GreenTag
- Global Organic Textile Standard
- Global Responsible Textile Standard
- Green Seal
- Health Product Declaration
- International EPD System
- Living Product Challenge
- Nordic Swan
- PEFC
- Product Carbon Footprint
- Responsible Steel
- Responsible Wood
- SCS Standards
- Steel Sustainability Australia
- Sustainable Forestry Initiative
- UL GREENGUARD
- AFRDI Green Tick
- CDPH Standard Method
- CEN
- ISO
- LEVEL
- NaturePlus (GreenCollar)
- PACT
1 credential, in Green Star Responsible Products, NABERS Embodied Carbon v2.1 (pilot) and EnviroDevelopment v4. Clear selection
EPD
Where it earns points or counts, rating tool by rating tool. About EPD
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Green Star Responsible ProductsRating tool
Counts towards Responsible Products Value
EPD
- Status
- Accepted
- Edition named
- Industry-Wide EPD EN15804 or ISO14025 (Third-Party Verified)
- Earns
- Responsible Products Value 1 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
EPD
- Status
- Accepted
- Edition named
- ISO 14025 (non-construction products)
- Earns
- Responsible Products Value 7 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
EPD
- Status
- Accepted
- Edition named
- ISO 14025 + EN 15804 (construction products)
- Earns
- Responsible Products Value 7 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
EPD
- Status
- Accepted
- Edition named
- Product-Specific EPD EN15804 or ISO14025 (Third-Party Verified)
- Earns
- Responsible Products Value 7 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
NABERS Embodied Carbon v2.1 (pilot)Rating tool
10.4.1; 10.4.2.1; 10.4.2.3; 14.8.2 (stored biogenic carbon in timber, Carbon Removal Indicator)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- EN 15804+A2:2019
- On what basis
- Stored biogenic carbon in product (BCC-prod)
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only; does not affect the star rating or emissions intensity; not for repurposed materials (10.6) or non-timber biomass (10.5)
- Conditions
- timber or paper material only
- applies when a product-specific emission factor per Section 9.4 (conforming EPD) is used
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a statement that at least 95 % of the timber is certified is acceptable
- use BCC-prod; exclude BCC-pack
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- GWPB must not be used to find stored biogenic carbon
- if stored carbon cannot be found, use the default estimate in 10.4.3
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 69, 94
11.4.4 Source location as defined by an EPD; 14.9.1
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Source location for transport emissions
- Products
- Materials entered with an EPD
- Scope
- Transport emissions (A4) source location only
- Conditions
- source location is the manufacturing exit gate stated in the EPD
- where the EPD lists several production sites, use the site closest to the rated premises unless the actual site used is known
- not available for default assemblies
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 74, 95
9.4.2 a); 9.4.3.1 Conforming EPDs; 9.4.3.2; 9.4.3.3; 9.4.3.5 (product-specific emission factor, specific-product EPD)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017
- On what basis
- GWPT, modules A1-A3
- Products
- Any included material with a product-specific EPD
- Scope
- Overrides the default emission factor for that material only; cannot be used for similar products from other manufacturers; modules A1-A3 only
- Conditions
- Not shown under New South Wales Government (NABERS)'s terms
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.2 b); 9.4.3.1 f); 9.4.3.4 Industry average EPDs
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017 (industry average EPD)
- On what basis
- Worst-case GWPT, modules A1-A3 (average multiplied by maximum variation)
- Products
- Materials covered by an industry average EPD
- Scope
- Second priority after product-specific data (9.4.2 b))
- Conditions
- Not shown under New South Wales Government (NABERS)'s terms
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.3.5; 10.4.1; 10.4.2.3 (stored biogenic carbon from older EPDs)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- EN 15804+A1 and ISO 21930 (as printed)
- On what basis
- Stored biogenic carbon in product
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only
- Conditions
- EPD conforms to Section 9.4.3.1
- timber or paper material only
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a stored carbon value given in text or a diagram may be used only if the EPD clearly states it is stored in the product
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- if unsure or not reported, estimate using 10.4.3
- GWPB must not be used
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 61, 68, 69, 94
9.7.2 Vertical transport services (lift EPDs)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Modules A1-A3
- Products
- Lifts
- Scope
- Replaces default vertical transport emission factors
- Conditions
- conforming EPD as per Section 9.4
- multiply the per-tkm factor by the total transportation performance over the service life per ISO 25745-2
- where several usage categories are published, select the most appropriate one as detailed in the EPD and confirmed by the lift manufacturer or developer
- enter the mass of the lift
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 65
EnviroDevelopment v4Rating tool
Materials 4.2.5(b) Structure: non-structural steel. Same clause in all ten typology sections: Masterplanned Communities, Residential Subdivision, Seniors Living, Multi-Unit Residential, Mixed Use, Industrial, Retail, Education, Health and Aged Care, Commercial
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- non-structural steel
- Scope
- Built form structure option. It is an alternative to recycled content ≥15%. It applies to 80% of non-structural steel, a project quantity.
- Conditions
- EPD to EN15804
- product is non-structural steel
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. Same treatment in all ten typology sections.
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- structural timber
- Scope
- Built form structure option. It is an alternative or addition to PEFC/AFS/FSC certification.
- Conditions
- EPD to EN15804
- product is structural timber
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(f) Structure: bricks. Lettered 4.2.5(e) in Residential Subdivision. Same treatment in all ten typology sections.
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- bricks
- Scope
- Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
- Conditions
- EPD to EN15804
- product is bricks
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.9 Alternative compliance (EPDs and/or certifications). Printed as 4.2.8 in Commercial. Same treatment in all ten typology sections.
- Status
- Accepted
- Named as
- EPD
- Edition named
- Not stated by the tool
- Products
- procured materials (any)
- Scope
- Alternative “compliance” (EnviroDevelopment’s word) route. 80% of procured materials is a project threshold. No EN15804 requirement is stated in this option.
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308