Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

Australia and New Zealand

International

2 credentials, in EnviroDevelopment v4 and BREEAM International NC v7.1. Clear selection

EMICODE

Where it earns points or counts, rating tool by rating tool. About EMICODE

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

None of the rating tools or policies selected names EMICODE. That is not a statement that none accepts it.

Read EMICODE’s requirements →

EPD

Where it earns points or counts, rating tool by rating tool. About EPD

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

EnviroDevelopment v4Rating tool

Materials 4.2.5(b) Structure: non-structural steel. Same clause in all ten typology sections: Masterplanned Communities, Residential Subdivision, Seniors Living, Multi-Unit Residential, Mixed Use, Industrial, Retail, Education, Health and Aged Care, Commercial
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Environmental Product Declaration to EN15804
Products
non-structural steel
Scope
Built form structure option. It is an alternative to recycled content ≥15%. It applies to 80% of non-structural steel, a project quantity.
Conditions
- EPD to EN15804
- product is non-structural steel
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. Same treatment in all ten typology sections.
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Environmental Product Declaration to EN15804
Products
structural timber
Scope
Built form structure option. It is an alternative or addition to PEFC/AFS/FSC certification.
Conditions
- EPD to EN15804
- product is structural timber
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(f) Structure: bricks. Lettered 4.2.5(e) in Residential Subdivision. Same treatment in all ten typology sections.
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Environmental Product Declaration to EN15804
Products
bricks
Scope
Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
Conditions
- EPD to EN15804
- product is bricks
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.9 Alternative compliance (EPDs and/or certifications). Printed as 4.2.8 in Commercial. Same treatment in all ten typology sections.
Status
Accepted
Named as
EPD
Edition named
Not stated by the tool
Products
procured materials (any)
Scope
Alternative “compliance” (EnviroDevelopment’s word) route. 80% of procured materials is a project threshold. No EN15804 requirement is stated in this option.
Source
EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

BREEAM International NC v7.1Rating tool

Evidence requirements, Table 8 Evidence types: Certificates of compliance (third party)
Status
Outside this credit's scope
Named as
EPD
Edition named
Not stated by the tool
Scope
General list of evidence document types, not a credit
Source
BREEAM International NC v7.1 · p. 34
Mat 01 Building life cycle assessment, M3 Third party verification, Table 73 item 2 (LCA or EPD data type); Definitions
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
first choice: product-specific EPD · Order of preference for LCA data
On what basis
LCA quality requirement checked by the third-party verifier for the exemplary verification credit (technical design phase)
Products
Construction products in the building LCA
Scope
Technical design and post-construction phases put a product EPD first and generic data second. Early design accepts generic or manufacturer-specific data.
Conditions
Not shown under BRE Global Ltd's terms
Source
BREEAM International NC v7.1 · Mat 01 · p. 298, 299, 301
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (multi-product, multi-manufacturer EPD)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
0.5 · EPD points
On what basis
Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
Products
Construction products (Table 75 material classes)
Scope
Not shown under BRE Global Ltd's terms
Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
Source
BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (multi-product, single-manufacturer EPD)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
0.75 · EPD points
On what basis
Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
Products
Construction products (Table 75 material classes)
Scope
Not shown under BRE Global Ltd's terms
Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
Source
BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (single-product, single-manufacturer EPD); CN1
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
1.5 · EPD points
On what basis
Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
Products
Construction products (Table 75 material classes)
Scope
Not shown under BRE Global Ltd's terms
Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
Source
BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305

Read EPD’s requirements →