Ratings & Policy
Find where a product credential earns points or counts, and what each rating tool or policy accepts.
Pick any rating tools or policies and any credentials. The results narrow to what you pick.
Australia and New Zealand
Which credential?
- Aluminium Stewardship Initiative
- BEP PVC
- BES 6001
- Blue Angel
- CARES Sustainable Constructional Steel
- Carpet Institute
- Climate Active
- Concrete Sustainability Council
- Cradle to Cradle Certified
- Declare
- Eco Choice Aotearoa
- EMICODE
- EPD
- EPD Australasia
- EU Ecolabel
- FSC
- GECA
- Global GreenTag
- Global Organic Textile Standard
- Global Responsible Textile Standard
- Green Seal
- Health Product Declaration
- International EPD System
- Living Product Challenge
- Nordic Swan
- PEFC
- Product Carbon Footprint
- Responsible Steel
- Responsible Wood
- SCS Standards
- Steel Sustainability Australia
- Sustainable Forestry Initiative
- UL GREENGUARD
- AFRDI Green Tick
- CDPH Standard Method
- CEN
- ISO
- LEVEL
- NaturePlus (GreenCollar)
- PACT
2 credentials, in EnviroDevelopment v4, WELL v2 and BREEAM International NC v7.1. Clear selection
Declare
Where it earns points or counts, rating tool by rating tool. About Declare
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
WELL v2Rating tool
X07 Materials Transparency, Part 1 Select Products With Disclosed Ingredients
- Status
- Accepted
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 25 distinct products.
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 2 Select Products With Enhanced Ingredient Disclosure
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- All ingredients disclosed down to 100 ppm
- All ingredients publicly disclosed
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 3 Select Products With Third-Party Verified Ingredients
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Ingredient disclosure “verified” (WELL’s word) by a third party not affiliated with the manufacturer or the certificate
- Source
- WELL v2 · X07 (materials/feature/7)
Not named by: EnviroDevelopment v4, BREEAM International NC v7.1.
EPD
Where it earns points or counts, rating tool by rating tool. About EPD
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
EnviroDevelopment v4Rating tool
Materials 4.2.5(b) Structure: non-structural steel. Same clause in all ten typology sections: Masterplanned Communities, Residential Subdivision, Seniors Living, Multi-Unit Residential, Mixed Use, Industrial, Retail, Education, Health and Aged Care, Commercial
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- non-structural steel
- Scope
- Built form structure option. It is an alternative to recycled content ≥15%. It applies to 80% of non-structural steel, a project quantity.
- Conditions
- EPD to EN15804
- product is non-structural steel
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. Same treatment in all ten typology sections.
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- structural timber
- Scope
- Built form structure option. It is an alternative or addition to PEFC/AFS/FSC certification.
- Conditions
- EPD to EN15804
- product is structural timber
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(f) Structure: bricks. Lettered 4.2.5(e) in Residential Subdivision. Same treatment in all ten typology sections.
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- bricks
- Scope
- Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
- Conditions
- EPD to EN15804
- product is bricks
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.9 Alternative compliance (EPDs and/or certifications). Printed as 4.2.8 in Commercial. Same treatment in all ten typology sections.
- Status
- Accepted
- Named as
- EPD
- Edition named
- Not stated by the tool
- Products
- procured materials (any)
- Scope
- Alternative “compliance” (EnviroDevelopment’s word) route. 80% of procured materials is a project threshold. No EN15804 requirement is stated in this option.
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308
BREEAM International NC v7.1Rating tool
Evidence requirements, Table 8 Evidence types: Certificates of compliance (third party)
- Status
- Outside this credit's scope
- Named as
- EPD
- Edition named
- Not stated by the tool
- Scope
- General list of evidence document types, not a credit
- Source
- BREEAM International NC v7.1 · p. 34
Mat 01 Building life cycle assessment, M3 Third party verification, Table 73 item 2 (LCA or EPD data type); Definitions
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- first choice: product-specific EPD · Order of preference for LCA data
- On what basis
- LCA quality requirement checked by the third-party verifier for the exemplary verification credit (technical design phase)
- Products
- Construction products in the building LCA
- Scope
- Technical design and post-construction phases put a product EPD first and generic data second. Early design accepts generic or manufacturer-specific data.
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v7.1 · Mat 01 · p. 298, 299, 301
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (multi-product, multi-manufacturer EPD)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 0.5 · EPD points
- On what basis
- Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
- Products
- Construction products (Table 75 material classes)
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (multi-product, single-manufacturer EPD)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 0.75 · EPD points
- On what basis
- Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
- Products
- Construction products (Table 75 material classes)
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (single-product, single-manufacturer EPD); CN1
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 1.5 · EPD points
- On what basis
- Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
- Products
- Construction products (Table 75 material classes)
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
Not named by: WELL v2.