Ratings & Policy
Find where a product credential earns points or counts, and what each rating tool or policy accepts.
Pick any rating tools or policies and any credentials. The results narrow to what you pick.
Australia and New Zealand
Which credential?
- Aluminium Stewardship Initiative
- BEP PVC
- BES 6001
- Blue Angel
- CARES Sustainable Constructional Steel
- Carpet Institute
- Climate Active
- Concrete Sustainability Council
- Cradle to Cradle Certified
- Declare
- Eco Choice Aotearoa
- EMICODE
- EPD
- EPD Australasia
- EU Ecolabel
- FSC
- GECA
- Global GreenTag
- Global Organic Textile Standard
- Global Responsible Textile Standard
- Green Seal
- Health Product Declaration
- International EPD System
- Living Product Challenge
- Nordic Swan
- PEFC
- Product Carbon Footprint
- Responsible Steel
- Responsible Wood
- SCS Standards
- Steel Sustainability Australia
- Sustainable Forestry Initiative
- UL GREENGUARD
- AFRDI Green Tick
- CDPH Standard Method
- CEN
- ISO
- LEVEL
- NaturePlus (GreenCollar)
- PACT
5 credentials, in every rating tool and policy. Clear selection
Declare
Where it earns points or counts, rating tool by rating tool. About Declare
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Green Star Responsible ProductsRating tool
Counts towards Responsible Products Value
Declare
- Status
- Accepted
- Edition named
- Declare 2.0 - Declared
- Earns
- Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
Declare
- Status
- Accepted
- Edition named
- Declare 2.0 - Red List Approved
- Earns
- Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
Declare
- Status
- Accepted
- Edition named
- Declare 2.0 - Red List Free
- Earns
- Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
Australian Government ESP PolicyProcurement policy
Evaluation guidance – Products, Table 1 (row 'Declare')
- Status
- Accepted with conditions
- Named as
- Declare
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- FFE products only
- Source
- Australian Government ESP Policy · p. 9
Homestar v5Rating tool
EN3 Sustainable Materials, means of compliance 'Declare'
- Status
- Accepted
- Named as
- Declare
- Edition named
- Not stated by the tool
- Level
- 0.25 · points per material category
- On what basis
- material category with at least 50% “compliant” (Homestar’s word) content
- Products
- not stated by the tool
- Source
- Homestar v5 · EN3 · EN3 p. 11
Homestar v4.1, supersededRating tool
MAT-1 Table 21 Declare
- Status
- Accepted
- Named as
- Declare
- Edition named
- Not stated by the tool
- Level
- 0.5 · MAT-1 points per material category
- On what basis
- Declare labelled products
- Products
- Any MAT-1 material category
- Source
- Homestar v4.1, superseded · MAT-1 · MAT p. 6
LEED v5 BD+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- version 2.0; v2.0 or later
- Edition named
- v2.0
- Level
- Declare v2.0: 1
- Red List Free or Approved, third-party “verified”: 2
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
LEED v5 ID+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- version 2.0; v2.0 or later
- Edition named
- v2.0
- Level
- Declare v2.0: 1
- Red List Free or Approved, third-party “verified”: 2
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 ID+C product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 ID+C · MRc4 · p. 5
LEED v4.1 BD+CRating tool
Counts towards MR Credit
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Red List Free, LBC Red List Free, or Declared · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 100
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- LBC Red List Approved or LBC Compliant · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 100
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Red List Free or LBC Red List Free · Declare label designation
- On what basis
- valued as 1 product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
LEED v4.1 ID+CRating tool
Counts towards MR Credit
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Red List Free, LBC Red List Free, or Declared · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- LBC Red List Approved or LBC Compliant · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Red List Free or LBC Red List Free · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
WELL v2Rating tool
X07 Materials Transparency, Part 1 Select Products With Disclosed Ingredients
- Status
- Accepted
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 25 distinct products.
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 2 Select Products With Enhanced Ingredient Disclosure
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- All ingredients disclosed down to 100 ppm
- All ingredients publicly disclosed
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 3 Select Products With Third-Party Verified Ingredients
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Ingredient disclosure “verified” (WELL’s word) by a third party not affiliated with the manufacturer or the certificate
- Source
- WELL v2 · X07 (materials/feature/7)
Living Building Challenge 4.1Rating tool · 4.1 Program Manual (January 2026)
I12 Responsible Materials (Core Imperative) · Declare Labels Requirement
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Conditions
- Not shown under International Living Future Institute (ILFI)'s terms
I12 Responsible Materials (Core Imperative) · Definition of Multipliers
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Conditions
- Not shown under International Living Future Institute (ILFI)'s terms
I14-3 Responsible Sourcing · Declare Product Requirement
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Conditions
- Not shown under International Living Future Institute (ILFI)'s terms
Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, EnviroDevelopment v4, EarthCheck BPDS v5, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.
EPD
Where it earns points or counts, rating tool by rating tool. About EPD
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Green Star Responsible ProductsRating tool
Counts towards Responsible Products Value
EPD
- Status
- Accepted
- Edition named
- Industry-Wide EPD EN15804 or ISO14025 (Third-Party Verified)
- Earns
- Responsible Products Value 1 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
EPD
- Status
- Accepted
- Edition named
- ISO 14025 (non-construction products)
- Earns
- Responsible Products Value 7 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
EPD
- Status
- Accepted
- Edition named
- ISO 14025 + EN 15804 (construction products)
- Earns
- Responsible Products Value 7 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
EPD
- Status
- Accepted
- Edition named
- Product-Specific EPD EN15804 or ISO14025 (Third-Party Verified)
- Earns
- Responsible Products Value 7 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
NABERS Embodied Carbon v2.1 (pilot)Rating tool
10.4.1; 10.4.2.1; 10.4.2.3; 14.8.2 (stored biogenic carbon in timber, Carbon Removal Indicator)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- EN 15804+A2:2019
- On what basis
- Stored biogenic carbon in product (BCC-prod)
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only; does not affect the star rating or emissions intensity; not for repurposed materials (10.6) or non-timber biomass (10.5)
- Conditions
- timber or paper material only
- applies when a product-specific emission factor per Section 9.4 (conforming EPD) is used
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a statement that at least 95 % of the timber is certified is acceptable
- use BCC-prod; exclude BCC-pack
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- GWPB must not be used to find stored biogenic carbon
- if stored carbon cannot be found, use the default estimate in 10.4.3
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 68, 69, 94
11.4.4 Source location as defined by an EPD; 14.9.1
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Source location for transport emissions
- Products
- Materials entered with an EPD
- Scope
- Transport emissions (A4) source location only
- Conditions
- source location is the manufacturing exit gate stated in the EPD
- where the EPD lists several production sites, use the site closest to the rated premises unless the actual site used is known
- not available for default assemblies
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 74, 95
9.4.2 a); 9.4.3.1 Conforming EPDs; 9.4.3.2; 9.4.3.3; 9.4.3.5 (product-specific emission factor, specific-product EPD)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017
- On what basis
- GWPT, modules A1-A3
- Products
- Any included material with a product-specific EPD
- Scope
- Overrides the default emission factor for that material only; cannot be used for similar products from other manufacturers; modules A1-A3 only
- Conditions
- Not shown under New South Wales Government (NABERS)'s terms
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.2 b); 9.4.3.1 f); 9.4.3.4 Industry average EPDs
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017 (industry average EPD)
- On what basis
- Worst-case GWPT, modules A1-A3 (average multiplied by maximum variation)
- Products
- Materials covered by an industry average EPD
- Scope
- Second priority after product-specific data (9.4.2 b))
- Conditions
- Not shown under New South Wales Government (NABERS)'s terms
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.3.5; 10.4.1; 10.4.2.3 (stored biogenic carbon from older EPDs)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- EN 15804+A1 and ISO 21930 (as printed)
- On what basis
- Stored biogenic carbon in product
- Products
- Timber and paper materials
- Scope
- Counts toward the Carbon Removal Indicator only
- Conditions
- EPD conforms to Section 9.4.3.1
- timber or paper material only
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a stored carbon value given in text or a diagram may be used only if the EPD clearly states it is stored in the product
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- if unsure or not reported, estimate using 10.4.3
- GWPB must not be used
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 61, 68, 69, 94
9.7.2 Vertical transport services (lift EPDs)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Modules A1-A3
- Products
- Lifts
- Scope
- Replaces default vertical transport emission factors
- Conditions
- conforming EPD as per Section 9.4
- multiply the per-tkm factor by the total transportation performance over the service life per ISO 25745-2
- where several usage categories are published, select the most appropriate one as detailed in the EPD and confirmed by the lift manufacturer or developer
- enter the mass of the lift
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 65
IS Rating v2.1Rating tool
Rso-6(credit title not shown under Infrastructure Sustainability Council's terms)
- Status
- Outside this credit's scope
- Named as
- EPD
- Edition named
- Not stated by the tool
- Source
- IS Rating v2.1 · Rso-6 · p. 51
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 0.75 · Sustainability Factor (SF)
- On what basis
- Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
- Products
- materials and products (any category)
- Scope
- Not shown under Infrastructure Sustainability Council's terms
- Conditions
- Not shown under Infrastructure Sustainability Council's terms
- Source
- IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 0.50 · Sustainability Factor (SF)
- On what basis
- Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
- Products
- materials and products (any category)
- Scope
- Not shown under Infrastructure Sustainability Council's terms
- Conditions
- Not shown under Infrastructure Sustainability Council's terms
- Source
- IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57
Australian Government ESP PolicyProcurement policy
Evaluation guidance – Products, 'Evidence of product sustainability' and 'Environmental Product Declarations'; SESP Template – Products, 'Products have a lower environmental footprint'
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- ISO 14025 (or EN 15804 for construction products)
- On what basis
- named way to verify; 'Gold standard verification includes third-party EPDs' (p. 5)
- Products
- FFE, ICT Goods, Textiles
- Scope
- The tool says EPDs do not show environmental preferability unless compared with other robust EPDs (p. 5).
- Conditions
- Not shown under Commonwealth of Australia (Department of Finance)'s terms
- Source
- Australian Government ESP Policy · p. 5, 6, 16, 17; SESP Template (unpaginated)
SESP Guidance for tender evaluation – Construction Services, 'Evidence'
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- on the indicative list of evidence
- Products
- Construction materials
- Scope
- Indicative evidence list. Evaluators are told not all businesses can obtain EPDs.
- Conditions
- applicable to the region in which the procurement is delivered
- Source
- Australian Government ESP Policy · p. 5
Homestar v5Rating tool
EN2 Embodied Carbon, Carbon Footprint Data and Bespoke carbon footprint calculation
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- source data for the whole-of-life embodied carbon calculation
- Products
- All materials in the EN2 assessment scope
- Scope
- EN2 awards points for the LCA and A1-A5 results, not for holding an EPD.
- Conditions
- datasets in line with EN 15804
- geographically relevant where possible
- used as source data in a bespoke calculation by or peer reviewed by a competent LCA practitioner
- Source
- Homestar v5 · EN2 · EN2 p. 1, 3, 4
EN3 Sustainable Materials, means of compliance 'EPD: Environmental Product Declaration', product-specific EPD; Additional Guidance on EPDs
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 1.25 points · points per material category
- On what basis
- product-specific EPD format
- Products
- not stated by the tool
- Conditions
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v5 · EN3 · EN3 p. 10, 12
EN3 Sustainable Materials, means of compliance 'EPD', industry-wide EPD; Additional Guidance on EPDs
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 0.75 point · points per material category
- On what basis
- industry-wide EPD format
- Products
- not stated by the tool
- Conditions
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v5 · EN3 · EN3 p. 10, 12
Homestar v4.1, supersededRating tool
MAT-1 Table 21 Environmental product Declaration; Additional Guidance: industry-wide EPD
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 1 · MAT-1 points per material category
- On what basis
- Industry wide EPD
- Products
- Any MAT-1 material category
- Conditions
- industry-wide EPD
- issued in conformance with ISO 14025 or EN15804
- independently audited
- cradle-to-gate scope at minimum
- manufacturer recognised as a participant in the EPD
- Source
- Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7
MAT-1 Table 21 Environmental product Declaration; Additional Guidance: product-specific EPD
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 1.5 · MAT-1 points per material category
- On what basis
- Product Specific EPD
- Products
- Any MAT-1 material category
- Conditions
- product-specific EPD
- issued in conformance with ISO 14025 or EN15804
- independently audited
- cradle-to-gate scope at minimum
- Source
- Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7
EnviroDevelopment v4Rating tool
Materials 4.2.5(b) Structure: non-structural steel. Same clause in all ten typology sections: Masterplanned Communities, Residential Subdivision, Seniors Living, Multi-Unit Residential, Mixed Use, Industrial, Retail, Education, Health and Aged Care, Commercial
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- non-structural steel
- Scope
- Built form structure option. It is an alternative to recycled content ≥15%. It applies to 80% of non-structural steel, a project quantity.
- Conditions
- EPD to EN15804
- product is non-structural steel
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. Same treatment in all ten typology sections.
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- structural timber
- Scope
- Built form structure option. It is an alternative or addition to PEFC/AFS/FSC certification.
- Conditions
- EPD to EN15804
- product is structural timber
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(f) Structure: bricks. Lettered 4.2.5(e) in Residential Subdivision. Same treatment in all ten typology sections.
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- Environmental Product Declaration to EN15804
- Products
- bricks
- Scope
- Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
- Conditions
- EPD to EN15804
- product is bricks
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.9 Alternative compliance (EPDs and/or certifications). Printed as 4.2.8 in Commercial. Same treatment in all ten typology sections.
- Status
- Accepted
- Named as
- EPD
- Edition named
- Not stated by the tool
- Products
- procured materials (any)
- Scope
- Alternative “compliance” (EnviroDevelopment’s word) route. 80% of procured materials is a project threshold. No EN15804 requirement is stated in this option.
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308
EarthCheck BPDS v5Rating tool
30.1 Guidance: fallback where no formal rating is available for a material
- Status
- Accepted as an owner ruling
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
- Products
- Material categories listed in the 30.1 guidance
- Scope
- Not shown under EarthCheck Pty Ltd's terms
- The rule
- Not shown under EarthCheck Pty Ltd's terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
- Source
- EarthCheck BPDS v5 · p. 75
LEED v5 BD+CRating tool
MRc2(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 1–3 POINTS · points
- On what basis
- project whole-project weighted-average GWP reduction against industry averages (Table 1)
- Products
- structure, enclosure and hardscape materials
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc2 · p. 2, 3
MRc2(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 1–2 POINTS NEW CONSTRUCTION · points
- On what basis
- number of material categories below industry benchmarks (Table 1: three categories 1 point; five or more 2 points)
- Products
- structure, enclosure and hardscape materials
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc2 · p. 3
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
- Draws on
- Climate Health, Ecosystem Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
LEED v5 ID+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- not named by the tool; industry-average (industrywide) Type III EPD
- Edition named
- Not stated by the tool
- Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
- Draws on
- Climate Health, Ecosystem Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 ID+C product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 ID+C · MRc4 · p. 5
LEED v4.1 BD+CRating tool
Counts towards MR Credit
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- ½ product · products counted toward credit achievement
- On what basis
- per product with an action plan
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 2 products · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
LEED v4.1 ID+CRating tool
Counts towards MR Credit
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- valued as one whole product · products (credit achievement calculation)
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- valued as one whole product · products (credit achievement calculation)
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- valued as 1.5 products · products (credit achievement calculation)
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- ½ product; 1 product; 1.5 products; 2 products · products (credit achievement calculation)
- On what basis
- per product, by report type
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 45
EPD
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 product · products (credit achievement calculation)
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
- Source
- LEED v4.1 ID+C · MR Credit · p. 45
BREEAM International NC v7.1Rating tool
Evidence requirements, Table 8 Evidence types: Certificates of compliance (third party)
- Status
- Outside this credit's scope
- Named as
- EPD
- Edition named
- Not stated by the tool
- Scope
- General list of evidence document types, not a credit
- Source
- BREEAM International NC v7.1 · p. 34
Mat 01 Building life cycle assessment, M3 Third party verification, Table 73 item 2 (LCA or EPD data type); Definitions
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- first choice: product-specific EPD · Order of preference for LCA data
- On what basis
- LCA quality requirement checked by the third-party verifier for the exemplary verification credit (technical design phase)
- Products
- Construction products in the building LCA
- Scope
- Technical design and post-construction phases put a product EPD first and generic data second. Early design accepts generic or manufacturer-specific data.
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v7.1 · Mat 01 · p. 298, 299, 301
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (multi-product, multi-manufacturer EPD)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 0.5 · EPD points
- On what basis
- Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
- Products
- Construction products (Table 75 material classes)
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (multi-product, single-manufacturer EPD)
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 0.75 · EPD points
- On what basis
- Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
- Products
- Construction products (Table 75 material classes)
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (single-product, single-manufacturer EPD); CN1
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- Level
- 1.5 · EPD points
- On what basis
- Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
- Products
- Construction products (Table 75 material classes)
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
BREEAM International NC v6.0, supersededRating tool
Mat 01 Life cycle impacts, criterion 5 (One credit - Environmental product declarations); CN3.2; Relevant definitions
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- per product covered by an EPD that BREEAM calls “verified”
- Products
- construction products, classified by Mat 03 Table 46 material categories
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
Mat 01 Life cycle impacts, exemplary level criterion 7; CN3.2
- Status
- Accepted with conditions
- Named as
- EPD
- Edition named
- Not stated by the tool
- On what basis
- per product covered by a manufacturer specific EPD that BREEAM calls “verified”
- Products
- construction products, classified by Mat 03 Table 46 material categories
- Scope
- Not shown under BRE Global Ltd's terms
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278
Not named by: WELL v2.
GECA
Where it earns points or counts, rating tool by rating tool. About GECA
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Green Star Responsible ProductsRating tool
Counts towards Responsible Products Value
Adhesives, Fillers and Sealants (AFS v4.0ii-2014)
- Status
- Accepted
- Edition named
- AFS v4.0ii-2014
- Earns
- Responsible Products Value 9 · Responsible Standard Scoring Dashboard, 27 Oct 2026Sources differ: “GECA Standards Shine in Green Star Recognition Update” (2025-01-08) gives 11.
- Source
- Green Star Responsible Products · Responsible Products Value
Adhesives, Fillers and Sealants (AFSv4.0i-2014)
- Status
- Accepted
- Edition named
- AFSv4.0i-2014
- Earns
- Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
Building Insulation Materials (BIMv2.0i-2018)
- Status
- Accepted
- Edition named
- BIMv2.0i-2018
- Earns
- Responsible Products Value 13 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Carpets (Cv3.0-2021)
- Status
- Accepted
- Edition named
- Cv3.0-2021
- Earns
- Responsible Products Value 12 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Cement, Concrete & Concrete Products (CCCPv1.0iii-2017)
- Status
- Accepted
- Edition named
- CCCPv1.0iii-2017
- Earns
- Responsible Products Value 16 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Floor Coverings (FC v3.0-2021)
- Status
- Accepted
- Edition named
- FC v3.0-2021
- Earns
- Responsible Products Value 13 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Furniture, Fittings, Foam & Mattresses (Level A) - FFFMv3.1i (2017)
- Status
- Accepted
- Edition named
- 2017
- Earns
- Responsible Products Value 16 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
GECA
- Status
- Accepted
- Edition named
- Furniture & Fittings (Level B) - FFv3.1i-2017
- Earns
- Responsible Products Value 14 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Hard Surfacing (HSv2.0i-2019)
- Status
- Accepted
- Edition named
- HSv2.0i-2019
- Earns
- Responsible Products Value 14 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Paints and Coatings (PC v2.3i-2012)
- Status
- Accepted
- Edition named
- PC v2.3i-2012
- Earns
- Responsible Products Value 11 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Panel Boards (PB v3.0-2021)
- Status
- Accepted
- Edition named
- PB v3.0-2021
- Earns
- Responsible Products Value 11 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Recycled Products (RPv1.0ii-2015)
- Status
- Accepted
- Edition named
- RPv1.0ii-2015
- Earns
- Responsible Products Value 11 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Steel and Steel Products (SSP v1.0i-2019)
- Status
- Accepted
- Edition named
- SSP v1.0i-2019
- Earns
- Responsible Products Value 15 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Sustainable Products and Services (SPSv2.0i-2020)
- Status
- Accepted
- Edition named
- SPSv2.0i-2020
- Earns
- Responsible Products Value 11 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Green Star HomesRating tool
Material Toxicity(credit title not shown under Green Building Council of Australia's terms)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- Not stated by the tool
- Products
- Paints, adhesives, sealants, carpets and other materials the credit covers
- Conditions
- Not shown under Green Building Council of Australia's terms
- Source
- Green Star Homes · Material Toxicity
IS Rating v2.1Rating tool
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
- Status
- Accepted
- Named as
- GECA
- Edition named
- Not stated by the tool
- Level
- 1.00 · Sustainability Factor (SF)
- On what basis
- Multiplier on the dollar value of labelled products, counted towards the share of total materials value (sliding scale: >0-30% for up to Level 2, >30-100% for >Level 2 to 3)
- Products
- materials and products (any category)
- Scope
- Not shown under Infrastructure Sustainability Council's terms
- Source
- IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57
Australian Government ESP PolicyProcurement policy
Evaluation guidance – Products, Table 1 (row 'GECA (Good Environmental Choice Australia)')
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
- Conditions
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 10
Evaluation guidance – Products, Table 3, 'Goods contain recycled content/recycled materials are used'
- Status
- Accepted with conditions
- Named as
- GECA Recycled Products standard
- Edition named
- Not stated by the tool
- Level
- GECA Recycled Products standard · standard
- On what basis
- named as an ecolabel that certifies recycled content
- Products
- FFE, ICT Goods, Textiles (Table 3 covers ESP products)
- Scope
- Recycled content consideration only; given as an example ('e.g.').
- Conditions
- certification to the GECA Recycled Products standard
- used as evidence of recycled content
- Source
- Australian Government ESP Policy · p. 17
Homestar v5Rating tool
EN3 Sustainable Materials, approved eco-labels; Recognised list, GECA Level A Recognition, MAT-1/EN3 columns
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- PCv2.2i-2012; 04-2011 v2; 40-2008 v1.1; FFM v3.0-2017; 28-2010 v2.1; 25-2011 v2; 50-2011 v2; BIMv2.0-2018; SSPv1.0-2019
- Level
- Level A Recognition · eco-label recognition level; Level A eco-label = 1.5 points
- On what basis
- points per material category
- Products
- Not shown under New Zealand Green Building Council's terms
- Scope
- No GECA entry for Concrete.
- Conditions
- product certified to the GECA standard listed for its category
- certificate must be for the final product; a component certificate needs a Technical Question
- Source
- Homestar v5 · EN3 · List p. 1; EN3 p. 9
EN3 Sustainable Materials, approved eco-labels; Recognised list, GECA Level B Recognition, EWP & Timber Product Sustainability (MAT-1/EN3)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA FF v3.0-2017 'Furniture and Fittings'
- Level
- Level B Recognition · eco-label recognition level; Level B eco-label = 1 point
- On what basis
- points per material category
- Products
- Engineered Wood Products (EWP) & Timber
- Scope
- Only Level B GECA entry; EN3 only (no HC7 entry).
- Conditions
- product certified to GECA FF v3.0-2017
- engineered wood products and timber only
- certificate must be for the final product
- Source
- Homestar v5 · EN3 · List p. 1; EN3 p. 9
HC7 Healthy Materials, methods (1)-(4); Recognised list, GECA Level A Recognition, MAT-2/HC7 columns
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- AFSv4.0-2014; PCv2.2i-2012; FFM v3.0-2017; 28-2010 v2.1; 04-2011 v2; 25-2011 v2; 50-2011 v2; 40-2008 v1.1
- On what basis
- product within the VOC limits specified by the recognised eco-label; listed as Level A Recognition
- Products
- Adhesives & Sealants: GECA AFSv4.0-2014; Applied Coatings: GECA PCv2.2i-2012; EWP: GECA FFM v3.0-2017, 28-2010 v2.1, 04-2011 v2, 25-2011 v2; Flooring: GECA 50-2011 v2, 25-2011 v2, 40-2008 v1.1, 04-2011v2
- Scope
- Interior of the dwelling only.
- Conditions
- usable for VOC or formaldehyde criteria only
- product certified to the GECA standard listed for its category
- certificate must be for the final product; a component certificate needs a Technical Question
- Source
- Homestar v5 · HC7 · List p. 1; HC7 p. 1, 2
Homestar v4.1, supersededRating tool
MAT-1 Approved eco-labels; list column Applied Coatings / Product Sustainability
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA PCv2.2i-2012
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Applied coatings (paint)
- Conditions
- certified to GECA PCv2.2i-2012
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column EWP & Timber / Product Sustainability, Level A row
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA FFM v3.0-2017; GECA 28-2010 v2.1; GECA 04-2011 v2; GECA 25-2011 v2
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Engineered wood products and timber
- Conditions
- certified to one of the four GECA standards listed
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column EWP & Timber / Product Sustainability, Level B row
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA FF v3.0-2017
- Level
- Level B Recognition · Homestar eco-label recognition level
- On what basis
- Level B Eco-label 1.5 points per material category
- Products
- Engineered wood products and timber
- Conditions
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column Flooring / Product Sustainability
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA 50-2011 v2; GECA 25-2011 v2; GECA 40-2008 v1.1; GECA 04-2011v2
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Floor coverings
- Conditions
- certified to one of the four GECA standards listed
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column Insulation / Product Sustainability
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- BIMv2.0-2018
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Insulation (soft thermal and acoustic)
- Scope
- Rigid insulation excluded from the category
- Conditions
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column Interior Plasterboard and Fibre Cement Linings / Product Sustainability
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA 04-2011v2; GECA 40-2008 v1.1
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Interior plasterboard and fibre cement linings
- Conditions
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column Steel / Product Sustainability
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- SSPv1.0-2019
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Steel
- Conditions
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-2 (1) applied coatings; list column Applied Coatings / Indoor Pollutant (VOC)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA PCv2.2i-2012
- On what basis
- MAT-2 awards 1 point where 50% of applied coatings “meet” (Homestar’s word) recognised VOC limits; listed as Level A Recognition
- Products
- Applied coatings
- Conditions
- certified to GECA PCv2.2i-2012
- VOC criteria only
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-2 · List p. 1; MAT p. 10-11
MAT-2 (2) adhesives and sealants; list column Adhesives & Sealants / Indoor Pollutant (VOC)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA AFSv4.0-2014
- On what basis
- MAT-2 awards 1 point where 50% of adhesives and sealants “meet” (Homestar’s word) recognised VOC limits; listed as Level A Recognition
- Products
- Adhesives and sealants
- Conditions
- certified to GECA AFSv4.0-2014
- VOC criteria only
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-2 · List p. 1; MAT p. 10-11
MAT-2 (3) floor coverings; list column Flooring / Indoor Pollutant (VOC)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA 50-2011 v2; GECA 25-2011 v2; GECA 40-2008 v1.1; GECA 04-2011v2
- On what basis
- MAT-2 awards 1 point where 50% of floor coverings “meet” (Homestar’s word) recognised VOC limits; listed as Level A Recognition
- Products
- Floor coverings
- Conditions
- certified to one of the four GECA standards listed
- VOC criteria only
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-2 · List p. 1; MAT p. 10-11
MAT-2 (4) engineered wood; list column EWP & Timber / Indoor Pollutant (VOC/Formaldehyde)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA FFM v3.0-2017; GECA 28-2010 v2.1; GECA 04-2011 v2; GECA 25-2011 v2
- On what basis
- MAT-2 awards 1 point where 50% of engineered wood “meets” (Homestar’s word) recognised VOC limits; listed as Level A Recognition
- Products
- Engineered wood
- Conditions
- certified to one of the four GECA standards listed
- VOC/formaldehyde criteria only
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-2 · List p. 1; MAT p. 10-11
EarthCheck BPDS v5Rating tool
30 Sustainable Materials Selection and Arrangement, 30.1 Green rating/eco-label schemes
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Named as
- GECA
- Edition named
- Not stated by the tool
- Level
- 4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
- On what basis
- Not shown under EarthCheck Pty Ltd's terms
- Products
- Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
- Scope
- Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
- The rule
- Not shown under EarthCheck Pty Ltd's terms
- Source
- EarthCheck BPDS v5 · p. 75
WELL v2Rating tool
X01 Material Restrictions, Part 3 Restrict Lead, 1: Paints and electronics (paints)
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Named as
- GECA
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- Scope
- Paint path only.
- The rule
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X01 (materials/feature/1)
X11 Cleaning Products and Protocols, Part 2 Select Preferred Cleaning Products
- Status
- Outside this credit's scope
- Named as
- GECA
- Edition named
- Not stated by the tool
- Products
- Cleaning products
- Scope
- Cleaning products, not construction products.
- Source
- WELL v2 · X11 (materials/feature/11)
Not named by: NABERS Embodied Carbon v2.1 (pilot), EnviroDevelopment v4, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.
Global Organic Textile Standard
Where it earns points or counts, rating tool by rating tool. About Global Organic Textile Standard
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
IS Rating v2.1Rating tool
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
- Status
- Klar Cite hasn't checked this yet
- Named as
- Global Organic Textile Standard
- Edition named
- Not stated by the tool
- Source
- IS Rating v2.1 · Rso-7 · p. 54
Australian Government ESP PolicyProcurement policy
Evaluation guidance – Products, Table 1 (row 'Global Organic Textiles Standard (GOTS)')
- Status
- Accepted with conditions
- Named as
- Global Organic Textile Standard
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- Textiles products only
- Source
- Australian Government ESP Policy · p. 10
Not named by: NABERS Embodied Carbon v2.1 (pilot), Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.
Sustainable Forestry Initiative
Where it earns points or counts, rating tool by rating tool. About Sustainable Forestry Initiative
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
IS Rating v2.1Rating tool
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
- Status
- Klar Cite hasn't checked this yet
- Named as
- Sustainable Forestry Initiative
- Edition named
- Not stated by the tool
- Source
- IS Rating v2.1 · Rso-7 · p. 54
LEED v5 BD+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Sustainable Forestry Initiative
- Edition named
- Not stated by the tool
- Level
- Legal sourcing with disclosure: 1
- 100% recycled: 2
- forestry and recycled: 2
- forestry: 3
- 100% certified forest: 4
- Draws on
- Ecosystem Health, Social Health & Equity, Circular Economy
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Reads two ways
- SC-004: the tool reads two ways (p. 15 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026); SC-005: the tool reads two ways (p. 19, 20 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
- Source
- LEED v5 BD+C · MRc4 · p. 5
LEED v5 ID+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Sustainable Forestry Initiative
- Edition named
- Not stated by the tool
- Level
- Legal sourcing with disclosure: 1
- 100% recycled: 2
- forestry and recycled: 2
- forestry: 3
- 100% certified forest: 4
- Draws on
- Ecosystem Health, Social Health & Equity, Circular Economy
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- wood products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Reads two ways
- SC-004: the tool reads two ways (p. 15 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026); SC-005: the tool reads two ways (p. 19, 20 and p. 5); the combined score is Table 1's (p. 5; owner, 28 Oct 2026)
- Source
- LEED v5 ID+C · MRc4 · p. 5
BREEAM International NC v7.1Rating tool
Man 03 Responsible construction, legally harvested and traded timber evidence table
- Status
- Accepted
- Named as
- Sustainable Forestry Initiative
- Edition named
- Not stated by the tool
- Level
- Yes / Yes · Demonstrates timber is legally harvested / Demonstrates timber is legally traded
- On what basis
- Evidence type for the legally harvested and traded timber requirement
- Products
- Timber
- Scope
- Applies only to new formwork, scaffolding boards or other new temporary site timber purchased for the project. Reused timber that can be “verified” (BREEAM’s word) is excluded.
- Source
- BREEAM International NC v7.1 · p. 66
Mat 03 Responsible sourcing, GN18 Table 1
- Status
- Accepted with conditions
- Named as
- 'SFI Certified Chain of Custody, Promoting Sustainable Forestry'
- Edition named
- Not stated by the tool
- Level
- 6 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per label plus additional requirement, used in the Mat 03 calculator tool
- Products
- not stated by the tool
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3
Mat 03 Responsible sourcing, GN18 Table 1
- Status
- Accepted with conditions
- Named as
- 'SFI Certified Chain of Custody, Promoting Sustainable Forestry'
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- Per label plus additional requirement, used in the Mat 03 calculator tool
- Products
- not stated by the tool
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v7.1 · Mat 03 · GN18 p. 2, 3
BREEAM International NC v6.0, supersededRating tool
Counts towards Mat 03 criterion 5 (Step 1.3); GN18 Table 1
'SFI Certified Chain of Custody, Promoting Sustainable Forestry'
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 6 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- timber and timber-based products
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 3 (GN18)
'SFI Certified Chain of Custody, Promoting Sustainable Forestry'
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 5 · RSCS summary score level (scale 1 to 10)
- On what basis
- per construction product, entered in the BREEAM International Mat 03 tool
- Products
- timber and timber-based products
- Scope
- In-scope products above the cut-off volume. Broken chain rules apply (CN3.4).
- Conditions
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 03 · p. 285, 293 (manual); 2, 3 (GN18)
Not named by: NABERS Embodied Carbon v2.1 (pilot), Australian Government ESP Policy, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2.