Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

Australia and New Zealand

International

2 credentials, in NABERS Embodied Carbon v2.1 (pilot). Clear selection

Climate Active

Where it earns points or counts, rating tool by rating tool. About Climate Active

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

NABERS Embodied Carbon v2.1 (pilot)Rating tool

10.3 Claiming carbon neutral materials; 14.8.1
Status
Accepted with conditions
Named as
Climate Active Product Certification (Public Disclosure Statement)
Edition named
Not stated by the tool
On what basis
Carbon offsets, modules A1-A3
Products
Individual building materials
Scope
Carbon Removal Indicator only; does not affect the star rating or emissions intensity
Conditions
- a product-specific emission factor for the Climate Active certified product is used per 9.4.5
- individual building materials only
- covers extraction, processing and manufacture only (A1-A3)
- public disclosure statement for the year the material was purchased
- as-built evidence that the specific material was used
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 67, 94
10.4.2.1; 10.4.2.5 Finding stored biogenic carbon in a Climate Active Public Disclosure Statement; 10.4.3
Status
Accepted with conditions
Named as
Climate Active Product Certification (Public Disclosure Statement)
Edition named
Not stated by the tool
On what basis
Estimated stored biogenic carbon (Formula 10.4.3a)
Products
Timber products
Scope
Carbon Removal Indicator only
Conditions
- timber or paper material only
- the certification confirms the material is from a sustainably managed source
- stored carbon must be calculated with the 10.4.3 method
- water content, moisture content or dry-matter carbon content from the statement are used where published, otherwise the default assumptions apply
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 68, 70, 71
12.3.2.2 Standard for acceptable data (construction and commissioning energy); 14.10.1
Status
Accepted with conditions
Named as
Climate Active Building Certification (Public Disclosure Statement)
Edition named
Not stated by the tool
On what basis
Site construction and commissioning energy use
Products
Construction and commissioning energy (not a product)
Scope
Evidence for replacing the default construction energy rate only
Conditions
- clearly shows the amount of energy use
- clearly shows the date of sale or time period of use
- record from a third party
- for construction and commissioning energy only (12.3.2.2), not for material emissions, where only product certifications count (p. 12)
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 77, 95
9.4.2 a); 9.4.5.1 Conforming Climate Active Public Disclosure Statements; 9.4.5.2
Status
Accepted with conditions
Named as
Climate Active Product Certification (Public Disclosure Statement)
Edition named
Not stated by the tool
On what basis
GHG total emissions, modules A1-A3, entered as GWPT
Products
Any included material
Scope
Product-level certification only; other Climate Active certifications are not considered (definition)
Conditions
Not shown under New South Wales Government (NABERS)'s terms
Reads two ways
SC-006: the tool reads two ways (p. 53 and p. 62); this row follows p. 62
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 12, 53, 62

Read Climate Active’s requirements →

Product Carbon Footprint

Where it earns points or counts, rating tool by rating tool. About Product Carbon Footprint

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

NABERS Embodied Carbon v2.1 (pilot)Rating tool

10.4.2.1; 10.4.2.4 Finding stored biogenic carbon in a carbon footprint; 14.8.2
Status
Accepted with conditions
Named as
Product Carbon Footprint
Edition named
ISO 14067 or PAS 2050
On what basis
GHG biogenic removals
Products
Timber and paper materials
Scope
Counts toward the Carbon Removal Indicator only
Conditions
- carbon footprint conforms to 9.4.4.1 (“compliant” (NABERS’s word) with ISO 14067 or PAS 2050; system boundary “equivalent” to EN 15804 or ISO 21930; refers directly to the material by unique product name or code; independently “verified”, verifier not involved in defining scope or conducting the LCA; dated within five years before the last delivery of the product to site)
- timber or paper material only
- confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- use the GHG biogenic removals value
- if not reported separately, estimate using 10.4.3
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 68, 70, 94
9.4.2 a); 9.4.4.1 Conforming carbon footprint declarations; 9.4.4.2
Status
Accepted with conditions
Named as
ISO 14067 or PAS 2050 (Related documents list ISO 14067:2018)
Edition named
Related documents list ISO 14067:2018
On what basis
GHG total emissions, modules A1-A3, entered as GWPT
Products
Any included material
Scope
Overrides the default emission factor for that material; modules A1-A3
Conditions
- follows ISO 14067 or PAS 2050
- system boundary matches the EN 15804 or ISO 21930 boundary
- names the material by unique product name or code
- independently “verified” (NABERS’s word) by a verifier not involved in defining the scope or conducting the LCA study
- dated within five years before the last delivery of the product to site
- unit matches the unit selected in the input form
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 9, 53, 61, 62

Read Product Carbon Footprint’s requirements →