Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

3 credentials, in EnviroDevelopment v4, LEED v5 BD+C and WELL v2. Clear selection

CDPH Standard Method

Where it earns points or counts, rating tool by rating tool. About CDPH Standard Method

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

None of the rating tools or policies selected names CDPH Standard Method. That is not a statement that none accepts it.

Read CDPH Standard Method’s requirements →

EPD Australasia

Where it earns points or counts, rating tool by rating tool. About EPD Australasia

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

EnviroDevelopment v4Rating tool

  • Materials 4.2.5(b), (e), (f) Structure: EPD to EN15804 options for non-structural steel, structural timber and bricks. All ten typology sections.

    Status
    Accepted as a kind of credential
    Named as
    EPD Australasia
    Edition named
    Not stated by the tool
    Products
    non-structural steel; structural timber; bricks
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
  • Materials 4.2.9 Alternative compliance (4.2.8 in Commercial). All ten typology sections.

    Status
    Accepted as a kind of credential
    Named as
    EPD Australasia
    Edition named
    Not stated by the tool
    Products
    procured materials (any)
    The rule
    Not recorded
    Source
    EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

LEED v5 BD+CRating tool

  • MRc2(credit title not shown under U.S. Green Building Council, Inc.'s terms)

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    EPD Australasia
    Edition named
    Not stated by the tool
    Level
    1–3 POINTS · points
    On what basis
    project GWP reduction against industry averages (Table 1)
    Products
    structure, enclosure and hardscape materials
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc2 · p. 2, 3
  • MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)

    Status
    Accepted as an ISO 14025 Type III EPD programme (own statement)
    Named as
    EPD Australasia
    Edition named
    Not stated by the tool
    Level
    • Product-specific Type III: 1
    • Optimised (over 20% lower GWP): 3
    • Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
    · LEED multi-attribute score (max 5)
    Draws on
    Climate Health, Ecosystem Health
    On what basis
    the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
    Products
    any MRc4 product category
    Scope
    Not shown under U.S. Green Building Council, Inc.'s terms
    The rule
    Not shown under U.S. Green Building Council, Inc.'s terms
    Source
    LEED v5 BD+C · MRc4 · p. 5

Not named by: WELL v2.

Read EPD Australasia’s requirements →

GECA

Where it earns points or counts, rating tool by rating tool. About GECA

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

WELL v2Rating tool

  • X01 Material Restrictions, Part 3 Restrict Lead, 1: Paints and electronics (paints)

    Status
    Accepted as an ISO 14024 Type I ecolabel (own statement)
    Named as
    GECA
    Edition named
    Not stated by the tool
    Products
    Paints applied as finishes
    Scope
    Paint path only.
    The rule
    Not shown under International WELL Building Institute pbc's terms
    Source
    WELL v2 · X01 (materials/feature/1)
  • X11 Cleaning Products and Protocols, Part 2 Select Preferred Cleaning Products

    Status
    Outside this credit's scope
    Named as
    GECA
    Edition named
    Not stated by the tool
    Products
    Cleaning products
    Scope
    Cleaning products, not construction products.
    Source
    WELL v2 · X11 (materials/feature/11)

Not named by: EnviroDevelopment v4, LEED v5 BD+C.

Read GECA’s requirements →