Ratings & Policy
Find where a product credential earns points or counts, and what each rating tool or policy accepts.
Pick any rating tools or policies and any credentials. The results narrow to what you pick.
Australia and New Zealand
Which credential?
- Aluminium Stewardship Initiative
- BEP PVC
- BES 6001
- Blue Angel
- CARES Sustainable Constructional Steel
- Carpet Institute
- Climate Active
- Concrete Sustainability Council
- Cradle to Cradle Certified
- Declare
- Eco Choice Aotearoa
- EMICODE
- EPD
- EPD Australasia
- EU Ecolabel
- FSC
- GECA
- Global GreenTag
- Global Organic Textile Standard
- Global Responsible Textile Standard
- Green Seal
- Health Product Declaration
- International EPD System
- Living Product Challenge
- Nordic Swan
- PEFC
- Product Carbon Footprint
- Responsible Steel
- Responsible Wood
- SCS Standards
- Steel Sustainability Australia
- Sustainable Forestry Initiative
- UL GREENGUARD
- AFRDI Green Tick
- CDPH Standard Method
- CEN
- ISO
- LEVEL
- NaturePlus (GreenCollar)
- PACT
6 credentials, in every rating tool and policy. Clear selection
CDPH Standard Method
Where it earns points or counts, rating tool by rating tool. About CDPH Standard Method
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
No rating tool or policy in Klar Cite names CDPH Standard Method. That is not a statement that none accepts it.
Declare
Where it earns points or counts, rating tool by rating tool. About Declare
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Green Star Responsible ProductsRating tool
Counts towards Responsible Products Value
Declare
- Status
- Accepted
- Edition named
- Declare 2.0 - Declared
- Earns
- Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
Declare
- Status
- Accepted
- Edition named
- Declare 2.0 - Red List Approved
- Earns
- Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
Declare
- Status
- Accepted
- Edition named
- Declare 2.0 - Red List Free
- Earns
- Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
Australian Government ESP PolicyProcurement policy
Evaluation guidance – Products, Table 1 (row 'Declare')
- Status
- Accepted with conditions
- Named as
- Declare
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE
- Scope
- Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
- Conditions
- FFE products only
- Source
- Australian Government ESP Policy · p. 9
Homestar v5Rating tool
EN3 Sustainable Materials, means of compliance 'Declare'
- Status
- Accepted
- Named as
- Declare
- Edition named
- Not stated by the tool
- Level
- 0.25 · points per material category
- On what basis
- material category with at least 50% “compliant” (Homestar’s word) content
- Products
- not stated by the tool
- Source
- Homestar v5 · EN3 · EN3 p. 11
Homestar v4.1, supersededRating tool
MAT-1 Table 21 Declare
- Status
- Accepted
- Named as
- Declare
- Edition named
- Not stated by the tool
- Level
- 0.5 · MAT-1 points per material category
- On what basis
- Declare labelled products
- Products
- Any MAT-1 material category
- Source
- Homestar v4.1, superseded · MAT-1 · MAT p. 6
LEED v5 BD+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- version 2.0; v2.0 or later
- Edition named
- v2.0
- Level
- Declare v2.0: 1
- Red List Free or Approved, third-party “verified”: 2
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
LEED v5 ID+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- version 2.0; v2.0 or later
- Edition named
- v2.0
- Level
- Declare v2.0: 1
- Red List Free or Approved, third-party “verified”: 2
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 ID+C product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 ID+C · MRc4 · p. 5
LEED v4.1 BD+CRating tool
Counts towards MR Credit
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Red List Free, LBC Red List Free, or Declared · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 100
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- LBC Red List Approved or LBC Compliant · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 100
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Red List Free or LBC Red List Free · Declare label designation
- On what basis
- valued as 1 product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
LEED v4.1 ID+CRating tool
Counts towards MR Credit
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Red List Free, LBC Red List Free, or Declared · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- LBC Red List Approved or LBC Compliant · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
Declare
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- Red List Free or LBC Red List Free · Declare label designation
- On what basis
- per product label
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
WELL v2Rating tool
X07 Materials Transparency, Part 1 Select Products With Disclosed Ingredients
- Status
- Accepted
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 25 distinct products.
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 2 Select Products With Enhanced Ingredient Disclosure
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- All ingredients disclosed down to 100 ppm
- All ingredients publicly disclosed
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 3 Select Products With Third-Party Verified Ingredients
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Ingredient disclosure “verified” (WELL’s word) by a third party not affiliated with the manufacturer or the certificate
- Source
- WELL v2 · X07 (materials/feature/7)
Living Building Challenge 4.1Rating tool · 4.1 Program Manual (January 2026)
I12 Responsible Materials (Core Imperative) · Declare Labels Requirement
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Conditions
- Not shown under International Living Future Institute (ILFI)'s terms
I12 Responsible Materials (Core Imperative) · Definition of Multipliers
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Conditions
- Not shown under International Living Future Institute (ILFI)'s terms
I14-3 Responsible Sourcing · Declare Product Requirement
- Status
- Accepted with conditions
- Named as
- Declare label
- Edition named
- Not stated by the tool
- Conditions
- Not shown under International Living Future Institute (ILFI)'s terms
Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, EnviroDevelopment v4, EarthCheck BPDS v5, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.
EPD Australasia
Where it earns points or counts, rating tool by rating tool. About EPD Australasia
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Green Star Responsible ProductsRating tool
Counts towards Responsible Products Value
EPD Australasia – Industry-average EPD
- Status
- Accepted
- Edition named
- Not stated by the tool
- Earns
- Responsible Products Value 1 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
EPD Australasia – Product-specific EPD
- Status
- Accepted
- Edition named
- Not stated by the tool
- Earns
- Responsible Products Value 7 · Green Star increases Responsible Product Values for EPDs, 12 Dec 2025
- Source
- Green Star Responsible Products · Responsible Products Value
NABERS Embodied Carbon v2.1 (pilot)Rating tool
9.4.3.1 Conforming EPDs (example)
- Status
- Accepted with conditions
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- On what basis
- GWPT, modules A1-A3
- Products
- Any included material with a product-specific EPD
- Scope
- Same scope as the EPD rows (emission factor, industry average, stored carbon)
- Conditions
- each EPD “meets” (NABERS’s word) the 9.4.3.1 conditions
- use the EPD version valid at the time of delivery to site, obtained from the manufacturer if the online version is newer
- Source
- NABERS Embodied Carbon v2.1 (pilot) · p. 59
IS Rating v2.1Rating tool
Counts towards Rso-7
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 0.75 · Sustainability Factor (SF)
- On what basis
- Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
- Products
- materials and products (any category)
- Scope
- Not shown under Infrastructure Sustainability Council's terms
- The rule
- Not shown under Infrastructure Sustainability Council's terms
- Source
- IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57, 59
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 0.50 · Sustainability Factor (SF)
- On what basis
- Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
- Products
- materials and products (any category)
- Scope
- Not shown under Infrastructure Sustainability Council's terms
- The rule
- Not shown under Infrastructure Sustainability Council's terms
- Source
- IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57, 59
Australian Government ESP PolicyProcurement policy
SESP Template – Products, 'Products have a lower environmental footprint'; Evaluation guidance – Products, 'Evidence of product sustainability'
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Products
- FFE, ICT Goods, Textiles
- Scope
- The rule is on the EPD; class membership is on the programme.
- The rule
- EPD “verified” (the ESP Policy’s word) by a third party
- EPD to ISO 14025
- Source
- Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5, 6
Homestar v5Rating tool
EN2 Embodied Carbon, Credit Criteria, definition of verified embodied carbon data
- Status
- Accepted with conditions
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Products
- not stated by the tool
- Scope
- Context is exemptions for individual assemblies at 6 and 7 Homestar where data that Homestar calls “verified” is not available.
- Conditions
- Not shown under New Zealand Green Building Council's terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. EN2 p. 1).
- Source
- Homestar v5 · EN2 · EN2 p. 1
EN3 Sustainable Materials, EPD industry-wide; Additional Guidance on EPDs
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Level
- 0.75 point · points per material category
- On what basis
- industry-wide EPD format
- Products
- not stated by the tool
- The rule
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v5 · EN3 · EN3 p. 10, 12
EN3 Sustainable Materials, EPD product-specific; Additional Guidance on EPDs
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Level
- 1.25 points · points per material category
- On what basis
- product-specific EPD format
- Products
- not stated by the tool
- The rule
- product-specific EPD that Homestar calls “third-party verified”
- independently audited
- cradle-to-gate scope as a minimum
- Source
- Homestar v5 · EN3 · EN3 p. 10, 12
Homestar v4.1, supersededRating tool
MAT-1 Table 21 Environmental product Declaration; industry-wide EPD
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Level
- 1 · MAT-1 points per material category
- On what basis
- Industry wide EPD
- Products
- Any MAT-1 material category
- The rule
- industry-wide EPD
- independently audited
- cradle-to-gate scope at minimum
- manufacturer recognised as a participant in the EPD
- Source
- Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7
MAT-1 Table 21 Environmental product Declaration; product-specific EPD
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Level
- 1.5 · MAT-1 points per material category
- On what basis
- Product Specific EPD
- Products
- Any MAT-1 material category
- The rule
- product-specific EPD
- independently audited
- cradle-to-gate scope at minimum
- Source
- Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7
EnviroDevelopment v4Rating tool
Materials 4.2.5(b), (e), (f) Structure: EPD to EN15804 options for non-structural steel, structural timber and bricks. All ten typology sections.
- Status
- Accepted as a kind of credential
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Products
- non-structural steel; structural timber; bricks
- The rule
- Not recorded
- Source
- EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.9 Alternative compliance (4.2.8 in Commercial). All ten typology sections.
- Status
- Accepted as a kind of credential
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Products
- procured materials (any)
- The rule
- Not recorded
- Source
- EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308
EarthCheck BPDS v5Rating tool
30.1 Guidance: fallback where no formal rating is available for a material
- Status
- Accepted as an owner ruling
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Level
- 4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
- Products
- Material categories listed in the 30.1 guidance
- Scope
- Not shown under EarthCheck Pty Ltd's terms
- The rule
- Not shown under EarthCheck Pty Ltd's terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
- Source
- EarthCheck BPDS v5 · p. 75
LEED v5 BD+CRating tool
MRc2(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Level
- 1–3 POINTS · points
- On what basis
- project GWP reduction against industry averages (Table 1)
- Products
- structure, enclosure and hardscape materials
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc2 · p. 2, 3
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
- Draws on
- Climate Health, Ecosystem Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
LEED v5 ID+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
- Draws on
- Climate Health, Ecosystem Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 ID+C product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 ID+C · MRc4 · p. 5
LEED v4.1 BD+CRating tool
Counts towards MR Credit
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per permanently installed product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 96
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- ½ product · products counted toward credit achievement
- On what basis
- per product with an action plan
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 2 products · products counted toward credit achievement
- On what basis
- per product with an optimization report
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
- Source
- LEED v4.1 BD+C · MR Credit · p. 97
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- one whole product · products counted toward credit achievement
- On what basis
- per product
- Products
- products under the Furniture and Medical Furnishings credit
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 106
LEED v4.1 ID+CRating tool
Counts towards MR Credit
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- valued as one whole product · products (credit achievement calculation)
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- valued as 1.5 products · products (credit achievement calculation)
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 44
EPD Australasia
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Edition named
- Not stated by the tool
- Level
- ½ product; 1 product; 1.5 products; 2 products · products (credit achievement calculation)
- On what basis
- per product, by report type
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- The rule
- Not shown under U.S. Green Building Council, Inc.'s terms
- How sure
- Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
- Source
- LEED v4.1 ID+C · MR Credit · p. 45
BREEAM International NC v7.1Rating tool
Mat 02 Environmental product declarations, Table 74 Validity
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- Level
- 0.5 (EPD for more than one product in the same product category, more than one manufacturer) / 0.75 (more than one product, single manufacturer) / 1.5 (single product or colour/pattern variations, single manufacturer) · EPD points
- On what basis
- Per EPD, by EPD type (0.5 / 0.75 / 1.5, see EPD rows)
- Products
- Construction products
- The rule
- EPD unexpired at the point of specification
- Product installed in the building by the end of construction
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- EPD not pending verification at the time of specification (CN2)
- Source
- BREEAM International NC v7.1 · Mat 02 · p. 304
BREEAM International NC v6.0, supersededRating tool
Mat 01 Life cycle impacts, criterion 5; CN3.2; Relevant definitions
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- On what basis
- per product covered by an EPD that BREEAM calls “verified”
- Products
- construction products, classified by Mat 03 Table 46 material categories
- Scope
- Only two EPDs per classification group may be counted.
- The rule
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
Mat 01 Life cycle impacts, exemplary level criterion 7; CN3.2
- Status
- Accepted as an ISO 14025 Type III EPD programme (own statement)
- Named as
- EPD Australasia
- Edition named
- Not stated by the tool
- On what basis
- per product covered by a manufacturer specific EPD that BREEAM calls “verified”
- Products
- construction products, classified by Mat 03 Table 46 material categories
- Scope
- Exemplary level only. Only two EPDs per classification group may be counted.
- The rule
- Not shown under BRE Global Ltd's terms
- Source
- BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
Not named by: WELL v2.
GECA
Where it earns points or counts, rating tool by rating tool. About GECA
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
Green Star Responsible ProductsRating tool
Counts towards Responsible Products Value
Adhesives, Fillers and Sealants (AFS v4.0ii-2014)
- Status
- Accepted
- Edition named
- AFS v4.0ii-2014
- Earns
- Responsible Products Value 9 · Responsible Standard Scoring Dashboard, 27 Oct 2026Sources differ: “GECA Standards Shine in Green Star Recognition Update” (2025-01-08) gives 11.
- Source
- Green Star Responsible Products · Responsible Products Value
Adhesives, Fillers and Sealants (AFSv4.0i-2014)
- Status
- Accepted
- Edition named
- AFSv4.0i-2014
- Earns
- Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
Building Insulation Materials (BIMv2.0i-2018)
- Status
- Accepted
- Edition named
- BIMv2.0i-2018
- Earns
- Responsible Products Value 13 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Carpets (Cv3.0-2021)
- Status
- Accepted
- Edition named
- Cv3.0-2021
- Earns
- Responsible Products Value 12 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Cement, Concrete & Concrete Products (CCCPv1.0iii-2017)
- Status
- Accepted
- Edition named
- CCCPv1.0iii-2017
- Earns
- Responsible Products Value 16 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Floor Coverings (FC v3.0-2021)
- Status
- Accepted
- Edition named
- FC v3.0-2021
- Earns
- Responsible Products Value 13 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Furniture, Fittings, Foam & Mattresses (Level A) - FFFMv3.1i (2017)
- Status
- Accepted
- Edition named
- 2017
- Earns
- Responsible Products Value 16 · Responsible Standard Scoring Dashboard, 27 Oct 2026
- Source
- Green Star Responsible Products · Responsible Products Value
GECA
- Status
- Accepted
- Edition named
- Furniture & Fittings (Level B) - FFv3.1i-2017
- Earns
- Responsible Products Value 14 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Hard Surfacing (HSv2.0i-2019)
- Status
- Accepted
- Edition named
- HSv2.0i-2019
- Earns
- Responsible Products Value 14 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Paints and Coatings (PC v2.3i-2012)
- Status
- Accepted
- Edition named
- PC v2.3i-2012
- Earns
- Responsible Products Value 11 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Panel Boards (PB v3.0-2021)
- Status
- Accepted
- Edition named
- PB v3.0-2021
- Earns
- Responsible Products Value 11 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Recycled Products (RPv1.0ii-2015)
- Status
- Accepted
- Edition named
- RPv1.0ii-2015
- Earns
- Responsible Products Value 11 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Steel and Steel Products (SSP v1.0i-2019)
- Status
- Accepted
- Edition named
- SSP v1.0i-2019
- Earns
- Responsible Products Value 15 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Sustainable Products and Services (SPSv2.0i-2020)
- Status
- Accepted
- Edition named
- SPSv2.0i-2020
- Earns
- Responsible Products Value 11 · GECA Standards Shine in Green Star Recognition Update, 8 Jan 2025
- Source
- Green Star Responsible Products · Responsible Products Value
Green Star HomesRating tool
Material Toxicity(credit title not shown under Green Building Council of Australia's terms)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- Not stated by the tool
- Products
- Paints, adhesives, sealants, carpets and other materials the credit covers
- Conditions
- Not shown under Green Building Council of Australia's terms
- Source
- Green Star Homes · Material Toxicity
IS Rating v2.1Rating tool
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
- Status
- Accepted
- Named as
- GECA
- Edition named
- Not stated by the tool
- Level
- 1.00 · Sustainability Factor (SF)
- On what basis
- Multiplier on the dollar value of labelled products, counted towards the share of total materials value (sliding scale: >0-30% for up to Level 2, >30-100% for >Level 2 to 3)
- Products
- materials and products (any category)
- Scope
- Not shown under Infrastructure Sustainability Council's terms
- Source
- IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57
Australian Government ESP PolicyProcurement policy
Evaluation guidance – Products, Table 1 (row 'GECA (Good Environmental Choice Australia)')
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- Not stated by the tool
- On what basis
- listed as an example in Table 1
- Products
- FFE, Textiles
- Scope
- Table 1 gives examples and is not exhaustive. Focus areas printed: Environment, Climate, Circularity.
- Conditions
- FFE or Textiles products only
- Source
- Australian Government ESP Policy · p. 10
Evaluation guidance – Products, Table 3, 'Goods contain recycled content/recycled materials are used'
- Status
- Accepted with conditions
- Named as
- GECA Recycled Products standard
- Edition named
- Not stated by the tool
- Level
- GECA Recycled Products standard · standard
- On what basis
- named as an ecolabel that certifies recycled content
- Products
- FFE, ICT Goods, Textiles (Table 3 covers ESP products)
- Scope
- Recycled content consideration only; given as an example ('e.g.').
- Conditions
- certification to the GECA Recycled Products standard
- used as evidence of recycled content
- Source
- Australian Government ESP Policy · p. 17
Homestar v5Rating tool
EN3 Sustainable Materials, approved eco-labels; Recognised list, GECA Level A Recognition, MAT-1/EN3 columns
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- PCv2.2i-2012; 04-2011 v2; 40-2008 v1.1; FFM v3.0-2017; 28-2010 v2.1; 25-2011 v2; 50-2011 v2; BIMv2.0-2018; SSPv1.0-2019
- Level
- Level A Recognition · eco-label recognition level; Level A eco-label = 1.5 points
- On what basis
- points per material category
- Products
- Not shown under New Zealand Green Building Council's terms
- Scope
- No GECA entry for Concrete.
- Conditions
- product certified to the GECA standard listed for its category
- certificate must be for the final product; a component certificate needs a Technical Question
- Source
- Homestar v5 · EN3 · List p. 1; EN3 p. 9
EN3 Sustainable Materials, approved eco-labels; Recognised list, GECA Level B Recognition, EWP & Timber Product Sustainability (MAT-1/EN3)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA FF v3.0-2017 'Furniture and Fittings'
- Level
- Level B Recognition · eco-label recognition level; Level B eco-label = 1 point
- On what basis
- points per material category
- Products
- Engineered Wood Products (EWP) & Timber
- Scope
- Only Level B GECA entry; EN3 only (no HC7 entry).
- Conditions
- product certified to GECA FF v3.0-2017
- engineered wood products and timber only
- certificate must be for the final product
- Source
- Homestar v5 · EN3 · List p. 1; EN3 p. 9
HC7 Healthy Materials, methods (1)-(4); Recognised list, GECA Level A Recognition, MAT-2/HC7 columns
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- AFSv4.0-2014; PCv2.2i-2012; FFM v3.0-2017; 28-2010 v2.1; 04-2011 v2; 25-2011 v2; 50-2011 v2; 40-2008 v1.1
- On what basis
- product within the VOC limits specified by the recognised eco-label; listed as Level A Recognition
- Products
- Adhesives & Sealants: GECA AFSv4.0-2014; Applied Coatings: GECA PCv2.2i-2012; EWP: GECA FFM v3.0-2017, 28-2010 v2.1, 04-2011 v2, 25-2011 v2; Flooring: GECA 50-2011 v2, 25-2011 v2, 40-2008 v1.1, 04-2011v2
- Scope
- Interior of the dwelling only.
- Conditions
- usable for VOC or formaldehyde criteria only
- product certified to the GECA standard listed for its category
- certificate must be for the final product; a component certificate needs a Technical Question
- Source
- Homestar v5 · HC7 · List p. 1; HC7 p. 1, 2
Homestar v4.1, supersededRating tool
MAT-1 Approved eco-labels; list column Applied Coatings / Product Sustainability
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA PCv2.2i-2012
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Applied coatings (paint)
- Conditions
- certified to GECA PCv2.2i-2012
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column EWP & Timber / Product Sustainability, Level A row
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA FFM v3.0-2017; GECA 28-2010 v2.1; GECA 04-2011 v2; GECA 25-2011 v2
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Engineered wood products and timber
- Conditions
- certified to one of the four GECA standards listed
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column EWP & Timber / Product Sustainability, Level B row
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA FF v3.0-2017
- Level
- Level B Recognition · Homestar eco-label recognition level
- On what basis
- Level B Eco-label 1.5 points per material category
- Products
- Engineered wood products and timber
- Conditions
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column Flooring / Product Sustainability
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA 50-2011 v2; GECA 25-2011 v2; GECA 40-2008 v1.1; GECA 04-2011v2
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Floor coverings
- Conditions
- certified to one of the four GECA standards listed
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column Insulation / Product Sustainability
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- BIMv2.0-2018
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Insulation (soft thermal and acoustic)
- Scope
- Rigid insulation excluded from the category
- Conditions
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column Interior Plasterboard and Fibre Cement Linings / Product Sustainability
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA 04-2011v2; GECA 40-2008 v1.1
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Interior plasterboard and fibre cement linings
- Conditions
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-1 Approved eco-labels; list column Steel / Product Sustainability
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- SSPv1.0-2019
- Level
- Level A Recognition · Homestar eco-label recognition level
- On what basis
- Level A Eco-label 2 points per material category
- Products
- Steel
- Conditions
- Not shown under New Zealand Green Building Council's terms
- Source
- Homestar v4.1, superseded · MAT-1 · List p. 1; MAT p. 4
MAT-2 (1) applied coatings; list column Applied Coatings / Indoor Pollutant (VOC)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA PCv2.2i-2012
- On what basis
- MAT-2 awards 1 point where 50% of applied coatings “meet” (Homestar’s word) recognised VOC limits; listed as Level A Recognition
- Products
- Applied coatings
- Conditions
- certified to GECA PCv2.2i-2012
- VOC criteria only
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-2 · List p. 1; MAT p. 10-11
MAT-2 (2) adhesives and sealants; list column Adhesives & Sealants / Indoor Pollutant (VOC)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA AFSv4.0-2014
- On what basis
- MAT-2 awards 1 point where 50% of adhesives and sealants “meet” (Homestar’s word) recognised VOC limits; listed as Level A Recognition
- Products
- Adhesives and sealants
- Conditions
- certified to GECA AFSv4.0-2014
- VOC criteria only
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-2 · List p. 1; MAT p. 10-11
MAT-2 (3) floor coverings; list column Flooring / Indoor Pollutant (VOC)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA 50-2011 v2; GECA 25-2011 v2; GECA 40-2008 v1.1; GECA 04-2011v2
- On what basis
- MAT-2 awards 1 point where 50% of floor coverings “meet” (Homestar’s word) recognised VOC limits; listed as Level A Recognition
- Products
- Floor coverings
- Conditions
- certified to one of the four GECA standards listed
- VOC criteria only
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-2 · List p. 1; MAT p. 10-11
MAT-2 (4) engineered wood; list column EWP & Timber / Indoor Pollutant (VOC/Formaldehyde)
- Status
- Accepted with conditions
- Named as
- GECA
- Edition named
- GECA FFM v3.0-2017; GECA 28-2010 v2.1; GECA 04-2011 v2; GECA 25-2011 v2
- On what basis
- MAT-2 awards 1 point where 50% of engineered wood “meets” (Homestar’s word) recognised VOC limits; listed as Level A Recognition
- Products
- Engineered wood
- Conditions
- certified to one of the four GECA standards listed
- VOC/formaldehyde criteria only
- certificate for the final product
- Source
- Homestar v4.1, superseded · MAT-2 · List p. 1; MAT p. 10-11
EarthCheck BPDS v5Rating tool
30 Sustainable Materials Selection and Arrangement, 30.1 Green rating/eco-label schemes
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Named as
- GECA
- Edition named
- Not stated by the tool
- Level
- 4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
- On what basis
- Not shown under EarthCheck Pty Ltd's terms
- Products
- Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
- Scope
- Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
- The rule
- Not shown under EarthCheck Pty Ltd's terms
- Source
- EarthCheck BPDS v5 · p. 75
WELL v2Rating tool
X01 Material Restrictions, Part 3 Restrict Lead, 1: Paints and electronics (paints)
- Status
- Accepted as an ISO 14024 Type I ecolabel (own statement)
- Named as
- GECA
- Edition named
- Not stated by the tool
- Products
- Paints applied as finishes
- Scope
- Paint path only.
- The rule
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X01 (materials/feature/1)
X11 Cleaning Products and Protocols, Part 2 Select Preferred Cleaning Products
- Status
- Outside this credit's scope
- Named as
- GECA
- Edition named
- Not stated by the tool
- Products
- Cleaning products
- Scope
- Cleaning products, not construction products.
- Source
- WELL v2 · X11 (materials/feature/11)
Not named by: NABERS Embodied Carbon v2.1 (pilot), EnviroDevelopment v4, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.
Health Product Declaration
Where it earns points or counts, rating tool by rating tool. About Health Product Declaration
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
LEED v5 BD+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Health Product Declaration
- Edition named
- Not stated by the tool
- Level
- pre-checked, 1,000 ppm: 1
- third-party “verified”, 100 ppm: 2
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 BD+C · MRc4 · p. 5
LEED v5 ID+CRating tool
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
- Status
- Accepted with conditions
- Named as
- Health Product Declaration
- Edition named
- Not stated by the tool
- Level
- pre-checked, 1,000 ppm: 1
- third-party “verified”, 100 ppm: 2
- Draws on
- Human Health
- On what basis
- the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
- Products
- any MRc4 ID+C product category
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v5 ID+C · MRc4 · p. 5
LEED v4.1 BD+CRating tool
Counts towards MR Credit
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- On what basis
- per end use product
- Products
- permanently installed products (end use product)
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 101
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 product · products counted toward credit achievement
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products counted toward credit achievement
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 BD+C · MR Credit · p. 102
LEED v4.1 ID+CRating tool
Counts towards MR Credit
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- complete HPD, hazards disclosed · disclosure completeness
- On what basis
- end use product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 48
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1 product · products (credit achievement calculation)
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
Health Product Declaration
- Status
- Accepted with conditions
- Edition named
- Not stated by the tool
- Level
- 1.5 products · products (credit achievement calculation)
- On what basis
- per product
- Products
- permanently installed products
- Scope
- Not shown under U.S. Green Building Council, Inc.'s terms
- Conditions
- Not shown under U.S. Green Building Council, Inc.'s terms
- Source
- LEED v4.1 ID+C · MR Credit · p. 50
WELL v2Rating tool
X07 Materials Transparency, Part 1 Select Products With Disclosed Ingredients
- Status
- Accepted with conditions
- Named as
- Health Product Declaration
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 25 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 2 Select Products With Enhanced Ingredient Disclosure
- Status
- Accepted with conditions
- Named as
- Health Product Declaration
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 3 Select Products With Third-Party Verified Ingredients
- Status
- Accepted with conditions
- Named as
- Health Product Declaration
- Edition named
- Not stated by the tool
- Products
- Permanently installed products, furniture, task and floor lamps
- Scope
- Project threshold: at least 15 distinct products.
- Conditions
- Not shown under International WELL Building Institute pbc's terms
- Source
- WELL v2 · X07 (materials/feature/7)
Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, Australian Government ESP Policy, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.
PACT
Where it earns points or counts, rating tool by rating tool. About PACT
Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.
No rating tool or policy in Klar Cite names PACT. That is not a statement that none accepts it.