Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

Australia and New Zealand

International

3 credentials, in NABERS Embodied Carbon v2.1 (pilot) and EnviroDevelopment v4. Clear selection

CDPH Standard Method

Where it earns points or counts, rating tool by rating tool. About CDPH Standard Method

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

None of the rating tools or policies selected names CDPH Standard Method. That is not a statement that none accepts it.

Read CDPH Standard Method’s requirements →

Declare

Where it earns points or counts, rating tool by rating tool. About Declare

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

None of the rating tools or policies selected names Declare. That is not a statement that none accepts it.

Read Declare’s requirements →

EPD

Where it earns points or counts, rating tool by rating tool. About EPD

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

NABERS Embodied Carbon v2.1 (pilot)Rating tool

10.4.1; 10.4.2.1; 10.4.2.3; 14.8.2 (stored biogenic carbon in timber, Carbon Removal Indicator)
Status
Accepted with conditions
Named as
EPD
Edition named
EN 15804+A2:2019
On what basis
Stored biogenic carbon in product (BCC-prod)
Products
Timber and paper materials
Scope
Counts toward the Carbon Removal Indicator only; does not affect the star rating or emissions intensity; not for repurposed materials (10.6) or non-timber biomass (10.5)
Conditions
- timber or paper material only
- applies when a product-specific emission factor per Section 9.4 (conforming EPD) is used
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a statement that at least 95 % of the timber is certified is acceptable
- use BCC-prod; exclude BCC-pack
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- GWPB must not be used to find stored biogenic carbon
- if stored carbon cannot be found, use the default estimate in 10.4.3
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 68, 69, 94
11.4.4 Source location as defined by an EPD; 14.9.1
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Source location for transport emissions
Products
Materials entered with an EPD
Scope
Transport emissions (A4) source location only
Conditions
- source location is the manufacturing exit gate stated in the EPD
- where the EPD lists several production sites, use the site closest to the rated premises unless the actual site used is known
- not available for default assemblies
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 74, 95
9.4.2 a); 9.4.3.1 Conforming EPDs; 9.4.3.2; 9.4.3.3; 9.4.3.5 (product-specific emission factor, specific-product EPD)
Status
Accepted with conditions
Named as
EPD
Edition named
ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017
On what basis
GWPT, modules A1-A3
Products
Any included material with a product-specific EPD
Scope
Overrides the default emission factor for that material only; cannot be used for similar products from other manufacturers; modules A1-A3 only
Conditions
Not shown under New South Wales Government (NABERS)'s terms
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.2 b); 9.4.3.1 f); 9.4.3.4 Industry average EPDs
Status
Accepted with conditions
Named as
EPD
Edition named
ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017 (industry average EPD)
On what basis
Worst-case GWPT, modules A1-A3 (average multiplied by maximum variation)
Products
Materials covered by an industry average EPD
Scope
Second priority after product-specific data (9.4.2 b))
Conditions
Not shown under New South Wales Government (NABERS)'s terms
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.3.5; 10.4.1; 10.4.2.3 (stored biogenic carbon from older EPDs)
Status
Accepted with conditions
Named as
EPD
Edition named
EN 15804+A1 and ISO 21930 (as printed)
On what basis
Stored biogenic carbon in product
Products
Timber and paper materials
Scope
Counts toward the Carbon Removal Indicator only
Conditions
- EPD conforms to Section 9.4.3.1
- timber or paper material only
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a stored carbon value given in text or a diagram may be used only if the EPD clearly states it is stored in the product
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- if unsure or not reported, estimate using 10.4.3
- GWPB must not be used
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 61, 68, 69, 94
9.7.2 Vertical transport services (lift EPDs)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Modules A1-A3
Products
Lifts
Scope
Replaces default vertical transport emission factors
Conditions
- conforming EPD as per Section 9.4
- multiply the per-tkm factor by the total transportation performance over the service life per ISO 25745-2
- where several usage categories are published, select the most appropriate one as detailed in the EPD and confirmed by the lift manufacturer or developer
- enter the mass of the lift
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 65

EnviroDevelopment v4Rating tool

Materials 4.2.5(b) Structure: non-structural steel. Same clause in all ten typology sections: Masterplanned Communities, Residential Subdivision, Seniors Living, Multi-Unit Residential, Mixed Use, Industrial, Retail, Education, Health and Aged Care, Commercial
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Environmental Product Declaration to EN15804
Products
non-structural steel
Scope
Built form structure option. It is an alternative to recycled content ≥15%. It applies to 80% of non-structural steel, a project quantity.
Conditions
- EPD to EN15804
- product is non-structural steel
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. Same treatment in all ten typology sections.
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Environmental Product Declaration to EN15804
Products
structural timber
Scope
Built form structure option. It is an alternative or addition to PEFC/AFS/FSC certification.
Conditions
- EPD to EN15804
- product is structural timber
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(f) Structure: bricks. Lettered 4.2.5(e) in Residential Subdivision. Same treatment in all ten typology sections.
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Environmental Product Declaration to EN15804
Products
bricks
Scope
Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
Conditions
- EPD to EN15804
- product is bricks
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.9 Alternative compliance (EPDs and/or certifications). Printed as 4.2.8 in Commercial. Same treatment in all ten typology sections.
Status
Accepted
Named as
EPD
Edition named
Not stated by the tool
Products
procured materials (any)
Scope
Alternative “compliance” (EnviroDevelopment’s word) route. 80% of procured materials is a project threshold. No EN15804 requirement is stated in this option.
Source
EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

Read EPD’s requirements →