Ratings & Policy

Find where a product credential earns points or counts, and what each rating tool or policy accepts.

Pick any rating tools or policies and any credentials. The results narrow to what you pick.

Australia and New Zealand

International

6 credentials, in every rating tool and policy. Clear selection

BEP PVC

Where it earns points or counts, rating tool by rating tool. About BEP PVC

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Counts towards Responsible Products Value

BEP PVC Version 1.0
Status
Accepted
Edition named
v1.0
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
BEP PVC Version 2.0
Status
Accepted
Edition named
v2.0
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
BEP PVC Version 2.0
Status
Accepted
Edition named
v2.0
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value

Green Star Design & As Built v1.3Rating tool

Materials credit 20.3(credit title not shown under Green Building Council of Australia's terms)
Status
Accepted with conditions
Named as
BEP PVC
Edition named
Not stated by the tool
Products
Permanent formwork, pipes, flooring, blinds and cables
Conditions
Not shown under Green Building Council of Australia's terms
Source
Green Star Design & As Built v1.3 · Materials credit 20.3

Green Star Interiors v1.3Rating tool

Materials credit 20.2(credit title not shown under Green Building Council of Australia's terms)
Status
Accepted with conditions
Named as
BEP PVC
Edition named
Not stated by the tool
Products
Permanent formwork, pipes, flooring, blinds and cables
Conditions
Not shown under Green Building Council of Australia's terms
Source
Green Star Interiors v1.3 · Materials credit 20.2

IS Rating v2.1Rating tool

Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
Status
Accepted
Named as
BEP PVC
Edition named
Not stated by the tool
Level
1.00 · Sustainability Factor (SF)
On what basis
Multiplier on the dollar value of labelled products, counted towards the share of total materials value (sliding scale to Level 3)
Products
not stated by the tool
Scope
Not shown under Infrastructure Sustainability Council's terms
Source
IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57

Not named by: NABERS Embodied Carbon v2.1 (pilot), Australian Government ESP Policy, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read BEP PVC’s requirements →

Declare

Where it earns points or counts, rating tool by rating tool. About Declare

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Counts towards Responsible Products Value

Declare
Status
Accepted
Edition named
Declare 2.0 - Declared
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Declare
Status
Accepted
Edition named
Declare 2.0 - Red List Approved
Earns
Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Declare
Status
Accepted
Edition named
Declare 2.0 - Red List Free
Earns
Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value

Australian Government ESP PolicyProcurement policy

Evaluation guidance – Products, Table 1 (row 'Declare')
Status
Accepted with conditions
Named as
Declare
Edition named
Not stated by the tool
On what basis
listed as an example in Table 1
Products
FFE
Scope
Table 1 gives examples and is not exhaustive. Focus area printed: Environment.
Conditions
FFE products only
Source
Australian Government ESP Policy · p. 9

Homestar v5Rating tool

EN3 Sustainable Materials, means of compliance 'Declare'
Status
Accepted
Named as
Declare
Edition named
Not stated by the tool
Level
0.25 · points per material category
On what basis
material category with at least 50% “compliant” (Homestar’s word) content
Products
not stated by the tool
Source
Homestar v5 · EN3 · EN3 p. 11

Homestar v4.1, supersededRating tool

MAT-1 Table 21 Declare
Status
Accepted
Named as
Declare
Edition named
Not stated by the tool
Level
0.5 · MAT-1 points per material category
On what basis
Declare labelled products
Products
Any MAT-1 material category
Source
Homestar v4.1, superseded · MAT-1 · MAT p. 6

LEED v5 BD+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
version 2.0; v2.0 or later
Edition named
v2.0
Level
- Declare v2.0: 1
- Red List Free or Approved, third-party “verified”: 2
· LEED multi-attribute score (max 5)
Draws on
Human Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
version 2.0; v2.0 or later
Edition named
v2.0
Level
- Declare v2.0: 1
- Red List Free or Approved, third-party “verified”: 2
· LEED multi-attribute score (max 5)
Draws on
Human Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 ID+C product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 ID+C · MRc4 · p. 5

LEED v4.1 BD+CRating tool

Counts towards MR Credit

Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Red List Free, LBC Red List Free, or Declared · Declare label designation
On what basis
per product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 100
Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
LBC Red List Approved or LBC Compliant · Declare label designation
On what basis
per product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 100
Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Red List Free or LBC Red List Free · Declare label designation
On what basis
valued as 1 product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 102

LEED v4.1 ID+CRating tool

Counts towards MR Credit

Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Red List Free, LBC Red List Free, or Declared · Declare label designation
On what basis
per product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 48
Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
LBC Red List Approved or LBC Compliant · Declare label designation
On what basis
per product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 48
Declare
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
Red List Free or LBC Red List Free · Declare label designation
On what basis
per product label
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 50

WELL v2Rating tool

X07 Materials Transparency, Part 1 Select Products With Disclosed Ingredients
Status
Accepted
Named as
Declare label
Edition named
Not stated by the tool
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 25 distinct products.
Source
WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 2 Select Products With Enhanced Ingredient Disclosure
Status
Accepted with conditions
Named as
Declare label
Edition named
Not stated by the tool
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 15 distinct products.
Conditions
- All ingredients disclosed down to 100 ppm
- All ingredients publicly disclosed
Source
WELL v2 · X07 (materials/feature/7)
X07 Materials Transparency, Part 3 Select Products With Third-Party Verified Ingredients
Status
Accepted with conditions
Named as
Declare label
Edition named
Not stated by the tool
Products
Permanently installed products, furniture, task and floor lamps
Scope
Project threshold: at least 15 distinct products.
Conditions
Ingredient disclosure “verified” (WELL’s word) by a third party not affiliated with the manufacturer or the certificate
Source
WELL v2 · X07 (materials/feature/7)

Living Building Challenge 4.1Rating tool · 4.1 Program Manual (January 2026)

I12 Responsible Materials (Core Imperative) · Declare Labels Requirement
Status
Accepted with conditions
Named as
Declare label
Edition named
Not stated by the tool
Conditions
Not shown under International Living Future Institute (ILFI)'s terms
I12 Responsible Materials (Core Imperative) · Definition of Multipliers
Status
Accepted with conditions
Named as
Declare label
Edition named
Not stated by the tool
Conditions
Not shown under International Living Future Institute (ILFI)'s terms
I14-3 Responsible Sourcing · Declare Product Requirement
Status
Accepted with conditions
Named as
Declare label
Edition named
Not stated by the tool
Conditions
Not shown under International Living Future Institute (ILFI)'s terms

Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, EnviroDevelopment v4, EarthCheck BPDS v5, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read Declare’s requirements →

EMICODE

Where it earns points or counts, rating tool by rating tool. About EMICODE

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Counts towards Responsible Products Value

Flooring Installation, Adhesives and Building Materials
Status
Accepted
Edition named
Not stated by the tool
Earns
Responsible Products Value 5 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Parquet, Mineral Floors and Resilient Floor Coverings
Status
Accepted
Edition named
Not stated by the tool
Earns
Responsible Products Value 5 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value

Homestar v5Rating tool

HC7 Healthy Materials, method (4) adhesives and sealants; Recognised list, Indoor Air Quality Schemes row
Status
Accepted with conditions
Named as
EMICODE
Edition named
Not stated by the tool
On what basis
product within the VOC limits set by the recognised IAQ scheme; a dot in the list's MAT-2/HC7 column, not a level
Products
Adhesives & Sealants (VOC)
Scope
Dot only in the Adhesives & Sealants MAT-2/HC7 column. Covers adhesives and sealants applied on site within the conditioned area.
Conditions
- usable for VOC or formaldehyde criteria only
- certificate must be for the final product; a component certificate needs a Technical Question
Source
Homestar v5 · HC7 · List p. 1; HC7 p. 1, 2

Homestar v4.1, supersededRating tool

MAT-1 Sustainable Materials (Product Sustainability columns)
Status
Excluded by the tool under this credit
Named as
EMICODE
Edition named
Not stated by the tool
Products
All MAT-1 categories
Source
Homestar v4.1, superseded · MAT-1 · List p. 1
MAT-2 (2) adhesives and sealants via Indoor Air Quality Schemes; list column Adhesives & Sealants / Indoor Pollutant (VOC)
Status
Accepted with conditions
Named as
EMICODE
Edition named
Not stated by the tool
On what basis
Recognised Indoor Air Quality Scheme; MAT-2 awards 1 point where 50% of adhesives and sealants “comply” (Homestar’s word); a dot in the list's MAT-2/HC7 column, not a level
Products
Adhesives and sealants
Scope
No dots in other columns; EMICODE class (GEV) not named
Conditions
- VOC criteria only
- adhesives and sealants only
- certificate for the final product
Source
Homestar v4.1, superseded · MAT-2 · List p. 1; MAT p. 10-11

Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, Australian Government ESP Policy, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read EMICODE’s requirements →

EPD

Where it earns points or counts, rating tool by rating tool. About EPD

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Counts towards Responsible Products Value

EPD
Status
Accepted
Edition named
Industry-Wide EPD EN15804 or ISO14025 (Third-Party Verified)
Earns
Responsible Products Value 1 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
EPD
Status
Accepted
Edition named
ISO 14025 (non-construction products)
Earns
Responsible Products Value 7 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
EPD
Status
Accepted
Edition named
ISO 14025 + EN 15804 (construction products)
Earns
Responsible Products Value 7 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
EPD
Status
Accepted
Edition named
Product-Specific EPD EN15804 or ISO14025 (Third-Party Verified)
Earns
Responsible Products Value 7 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value

NABERS Embodied Carbon v2.1 (pilot)Rating tool

10.4.1; 10.4.2.1; 10.4.2.3; 14.8.2 (stored biogenic carbon in timber, Carbon Removal Indicator)
Status
Accepted with conditions
Named as
EPD
Edition named
EN 15804+A2:2019
On what basis
Stored biogenic carbon in product (BCC-prod)
Products
Timber and paper materials
Scope
Counts toward the Carbon Removal Indicator only; does not affect the star rating or emissions intensity; not for repurposed materials (10.6) or non-timber biomass (10.5)
Conditions
- timber or paper material only
- applies when a product-specific emission factor per Section 9.4 (conforming EPD) is used
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a statement that at least 95 % of the timber is certified is acceptable
- use BCC-prod; exclude BCC-pack
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- GWPB must not be used to find stored biogenic carbon
- if stored carbon cannot be found, use the default estimate in 10.4.3
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 68, 69, 94
11.4.4 Source location as defined by an EPD; 14.9.1
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Source location for transport emissions
Products
Materials entered with an EPD
Scope
Transport emissions (A4) source location only
Conditions
- source location is the manufacturing exit gate stated in the EPD
- where the EPD lists several production sites, use the site closest to the rated premises unless the actual site used is known
- not available for default assemblies
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 74, 95
9.4.2 a); 9.4.3.1 Conforming EPDs; 9.4.3.2; 9.4.3.3; 9.4.3.5 (product-specific emission factor, specific-product EPD)
Status
Accepted with conditions
Named as
EPD
Edition named
ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017
On what basis
GWPT, modules A1-A3
Products
Any included material with a product-specific EPD
Scope
Overrides the default emission factor for that material only; cannot be used for similar products from other manufacturers; modules A1-A3 only
Conditions
Not shown under New South Wales Government (NABERS)'s terms
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.2 b); 9.4.3.1 f); 9.4.3.4 Industry average EPDs
Status
Accepted with conditions
Named as
EPD
Edition named
ISO 14025 with EN 15804+A1:2013, EN 15804+A2:2019 or ISO 21930:2017 (industry average EPD)
On what basis
Worst-case GWPT, modules A1-A3 (average multiplied by maximum variation)
Products
Materials covered by an industry average EPD
Scope
Second priority after product-specific data (9.4.2 b))
Conditions
Not shown under New South Wales Government (NABERS)'s terms
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 53, 59, 60, 61
9.4.3.5; 10.4.1; 10.4.2.3 (stored biogenic carbon from older EPDs)
Status
Accepted with conditions
Named as
EPD
Edition named
EN 15804+A1 and ISO 21930 (as printed)
On what basis
Stored biogenic carbon in product
Products
Timber and paper materials
Scope
Counts toward the Carbon Removal Indicator only
Conditions
- EPD conforms to Section 9.4.3.1
- timber or paper material only
- EPD confirms the material is from a sustainably managed source certified by FSC, or by Responsible Wood as part of PEFC
- a stored carbon value given in text or a diagram may be used only if the EPD clearly states it is stored in the product
- stored carbon given in kg of carbon must be multiplied by 44/12 to give kgCO2e
- if unsure or not reported, estimate using 10.4.3
- GWPB must not be used
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 61, 68, 69, 94
9.7.2 Vertical transport services (lift EPDs)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Modules A1-A3
Products
Lifts
Scope
Replaces default vertical transport emission factors
Conditions
- conforming EPD as per Section 9.4
- multiply the per-tkm factor by the total transportation performance over the service life per ISO 25745-2
- where several usage categories are published, select the most appropriate one as detailed in the EPD and confirmed by the lift manufacturer or developer
- enter the mass of the lift
Source
NABERS Embodied Carbon v2.1 (pilot) · p. 65

IS Rating v2.1Rating tool

Rso-6(credit title not shown under Infrastructure Sustainability Council's terms)
Status
Outside this credit's scope
Named as
EPD
Edition named
Not stated by the tool
Source
IS Rating v2.1 · Rso-6 · p. 51
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
0.75 · Sustainability Factor (SF)
On what basis
Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
Products
materials and products (any category)
Scope
Not shown under Infrastructure Sustainability Council's terms
Conditions
Not shown under Infrastructure Sustainability Council's terms
Source
IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57
Rso-7(credit title not shown under Infrastructure Sustainability Council's terms)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
0.50 · Sustainability Factor (SF)
On what basis
Multiplier on the dollar value of products with the EPD, counted towards the share of total materials value (sliding scale to Level 3)
Products
materials and products (any category)
Scope
Not shown under Infrastructure Sustainability Council's terms
Conditions
Not shown under Infrastructure Sustainability Council's terms
Source
IS Rating v2.1 · Rso-7 · p. 53, 54, 56, 57

Australian Government ESP PolicyProcurement policy

Evaluation guidance – Products, 'Evidence of product sustainability' and 'Environmental Product Declarations'; SESP Template – Products, 'Products have a lower environmental footprint'
Status
Accepted with conditions
Named as
EPD
Edition named
ISO 14025 (or EN 15804 for construction products)
On what basis
named way to verify; 'Gold standard verification includes third-party EPDs' (p. 5)
Products
FFE, ICT Goods, Textiles
Scope
The tool says EPDs do not show environmental preferability unless compared with other robust EPDs (p. 5).
Conditions
Not shown under Commonwealth of Australia (Department of Finance)'s terms
Source
Australian Government ESP Policy · p. 5, 6, 16, 17; SESP Template (unpaginated)
SESP Guidance for tender evaluation – Construction Services, 'Evidence'
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
on the indicative list of evidence
Products
Construction materials
Scope
Indicative evidence list. Evaluators are told not all businesses can obtain EPDs.
Conditions
applicable to the region in which the procurement is delivered
Source
Australian Government ESP Policy · p. 5

Homestar v5Rating tool

EN2 Embodied Carbon, Carbon Footprint Data and Bespoke carbon footprint calculation
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
source data for the whole-of-life embodied carbon calculation
Products
All materials in the EN2 assessment scope
Scope
EN2 awards points for the LCA and A1-A5 results, not for holding an EPD.
Conditions
- datasets in line with EN 15804
- geographically relevant where possible
- used as source data in a bespoke calculation by or peer reviewed by a competent LCA practitioner
Source
Homestar v5 · EN2 · EN2 p. 1, 3, 4
EN3 Sustainable Materials, means of compliance 'EPD: Environmental Product Declaration', product-specific EPD; Additional Guidance on EPDs
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
1.25 points · points per material category
On what basis
product-specific EPD format
Products
not stated by the tool
Conditions
Not shown under New Zealand Green Building Council's terms
Source
Homestar v5 · EN3 · EN3 p. 10, 12
EN3 Sustainable Materials, means of compliance 'EPD', industry-wide EPD; Additional Guidance on EPDs
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
0.75 point · points per material category
On what basis
industry-wide EPD format
Products
not stated by the tool
Conditions
Not shown under New Zealand Green Building Council's terms
Source
Homestar v5 · EN3 · EN3 p. 10, 12

Homestar v4.1, supersededRating tool

MAT-1 Table 21 Environmental product Declaration; Additional Guidance: industry-wide EPD
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
1 · MAT-1 points per material category
On what basis
Industry wide EPD
Products
Any MAT-1 material category
Conditions
- industry-wide EPD
- issued in conformance with ISO 14025 or EN15804
- independently audited
- cradle-to-gate scope at minimum
- manufacturer recognised as a participant in the EPD
Source
Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7
MAT-1 Table 21 Environmental product Declaration; Additional Guidance: product-specific EPD
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
1.5 · MAT-1 points per material category
On what basis
Product Specific EPD
Products
Any MAT-1 material category
Conditions
- product-specific EPD
- issued in conformance with ISO 14025 or EN15804
- independently audited
- cradle-to-gate scope at minimum
Source
Homestar v4.1, superseded · MAT-1 · MAT p. 5, 7

EnviroDevelopment v4Rating tool

Materials 4.2.5(b) Structure: non-structural steel. Same clause in all ten typology sections: Masterplanned Communities, Residential Subdivision, Seniors Living, Multi-Unit Residential, Mixed Use, Industrial, Retail, Education, Health and Aged Care, Commercial
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Environmental Product Declaration to EN15804
Products
non-structural steel
Scope
Built form structure option. It is an alternative to recycled content ≥15%. It applies to 80% of non-structural steel, a project quantity.
Conditions
- EPD to EN15804
- product is non-structural steel
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(e) Structure: structural timber. Lettered 4.2.5(d) in Residential Subdivision. Same treatment in all ten typology sections.
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Environmental Product Declaration to EN15804
Products
structural timber
Scope
Built form structure option. It is an alternative or addition to PEFC/AFS/FSC certification.
Conditions
- EPD to EN15804
- product is structural timber
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.5(f) Structure: bricks. Lettered 4.2.5(e) in Residential Subdivision. Same treatment in all ten typology sections.
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
Environmental Product Declaration to EN15804
Products
bricks
Scope
Not shown under Urban Development Institute of Australia (EnviroDevelopment)'s terms
Conditions
- EPD to EN15804
- product is bricks
Source
EnviroDevelopment v4 · p. 28, 62, 100, 134, 166, 196, 223, 250, 278, 307
Materials 4.2.9 Alternative compliance (EPDs and/or certifications). Printed as 4.2.8 in Commercial. Same treatment in all ten typology sections.
Status
Accepted
Named as
EPD
Edition named
Not stated by the tool
Products
procured materials (any)
Scope
Alternative “compliance” (EnviroDevelopment’s word) route. 80% of procured materials is a project threshold. No EN15804 requirement is stated in this option.
Source
EnviroDevelopment v4 · p. 29, 63, 101, 135, 167, 197, 224, 251, 279, 308

EarthCheck BPDS v5Rating tool

30.1 Guidance: fallback where no formal rating is available for a material
Status
Accepted as an owner ruling
Named as
EPD
Edition named
Not stated by the tool
Level
4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
Products
Material categories listed in the 30.1 guidance
Scope
Not shown under EarthCheck Pty Ltd's terms
The rule
Not shown under EarthCheck Pty Ltd's terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 75).
Source
EarthCheck BPDS v5 · p. 75

LEED v5 BD+CRating tool

MRc2(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
1–3 POINTS · points
On what basis
project whole-project weighted-average GWP reduction against industry averages (Table 1)
Products
structure, enclosure and hardscape materials
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc2 · p. 2, 3
MRc2(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
1–2 POINTS NEW CONSTRUCTION · points
On what basis
number of material categories below industry benchmarks (Table 1: three categories 1 point; five or more 2 points)
Products
structure, enclosure and hardscape materials
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc2 · p. 3
MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
· LEED multi-attribute score (max 5)
Draws on
Climate Health, Ecosystem Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 BD+C · MRc4 · p. 5

LEED v5 ID+CRating tool

MRc4(credit title not shown under U.S. Green Building Council, Inc.'s terms)
Status
Accepted with conditions
Named as
not named by the tool; industry-average (industrywide) Type III EPD
Edition named
Not stated by the tool
Level
- Product-specific Type III: 1
- Optimised (over 20% lower GWP): 3
- Optimised (over 40% lower GWP, over 10% lower in three more categories): 5
· LEED multi-attribute score (max 5)
Draws on
Climate Health, Ecosystem Health
On what basis
the combined score Table 1 prints for the document; a product takes the highest score in each criteria area, and areas add up to at most 5; “+” and “up to” mean recycled or biobased content can add to it
Products
any MRc4 ID+C product category
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v5 ID+C · MRc4 · p. 5

LEED v4.1 BD+CRating tool

Counts towards MR Credit

EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per permanently installed product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 96
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
one whole product · products counted toward credit achievement
On what basis
per permanently installed product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 96
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
one whole product · products counted toward credit achievement
On what basis
per permanently installed product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 96
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
½ product · products counted toward credit achievement
On what basis
per product with an action plan
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1 product · products counted toward credit achievement
On what basis
per product with an optimization report
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per product with an optimization report
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
2 products · products counted toward credit achievement
On what basis
per product with an optimization report
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 97).
Source
LEED v4.1 BD+C · MR Credit · p. 97
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1.5 products · products counted toward credit achievement
On what basis
per product
Products
products under the Furniture and Medical Furnishings credit
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 106
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
one whole product · products counted toward credit achievement
On what basis
per product
Products
products under the Furniture and Medical Furnishings credit
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 106
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
one whole product · products counted toward credit achievement
On what basis
per product
Products
products under the Furniture and Medical Furnishings credit
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 BD+C · MR Credit · p. 106

LEED v4.1 ID+CRating tool

Counts towards MR Credit

EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
valued as one whole product · products (credit achievement calculation)
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 44
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
valued as one whole product · products (credit achievement calculation)
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 44
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
valued as 1.5 products · products (credit achievement calculation)
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 44
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
½ product; 1 product; 1.5 products; 2 products · products (credit achievement calculation)
On what basis
per product, by report type
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
Source
LEED v4.1 ID+C · MR Credit · p. 45
EPD
Status
Accepted with conditions
Edition named
Not stated by the tool
Level
1 product · products (credit achievement calculation)
On what basis
per product
Products
permanently installed products
Scope
Not shown under U.S. Green Building Council, Inc.'s terms
Conditions
Not shown under U.S. Green Building Council, Inc.'s terms
How sure
Klar Cite’s reading is uncertain here; check the tool’s page (p. 45).
Source
LEED v4.1 ID+C · MR Credit · p. 45

BREEAM International NC v7.1Rating tool

Evidence requirements, Table 8 Evidence types: Certificates of compliance (third party)
Status
Outside this credit's scope
Named as
EPD
Edition named
Not stated by the tool
Scope
General list of evidence document types, not a credit
Source
BREEAM International NC v7.1 · p. 34
Mat 01 Building life cycle assessment, M3 Third party verification, Table 73 item 2 (LCA or EPD data type); Definitions
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
first choice: product-specific EPD · Order of preference for LCA data
On what basis
LCA quality requirement checked by the third-party verifier for the exemplary verification credit (technical design phase)
Products
Construction products in the building LCA
Scope
Technical design and post-construction phases put a product EPD first and generic data second. Early design accepts generic or manufacturer-specific data.
Conditions
Not shown under BRE Global Ltd's terms
Source
BREEAM International NC v7.1 · Mat 01 · p. 298, 299, 301
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (multi-product, multi-manufacturer EPD)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
0.5 · EPD points
On what basis
Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
Products
Construction products (Table 75 material classes)
Scope
Not shown under BRE Global Ltd's terms
Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
Source
BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (multi-product, single-manufacturer EPD)
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
0.75 · EPD points
On what basis
Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
Products
Construction products (Table 75 material classes)
Scope
Not shown under BRE Global Ltd's terms
Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
Source
BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305
Mat 02 Environmental product declarations, criteria 1-2, M1, Table 74 (single-product, single-manufacturer EPD); CN1
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
Level
1.5 · EPD points
On what basis
Per EPD. Points are summed per material classification, capped at 4 per classification. The credit needs a total of at least 20.
Products
Construction products (Table 75 material classes)
Scope
Not shown under BRE Global Ltd's terms
Conditions
- EPD unexpired at the point of specification
- EPD not pending verification at specification
- Product installed in the building by the end of construction
- EPD issued or registered by a programme operator working to ISO 14025
- For products under the Construction Product Regulations: product category rules based on BS EN 15804
- Type III declaration that BREEAM calls “Independently verified” to ISO 14025 (definition)
Source
BREEAM International NC v7.1 · Mat 02 · p. 303, 304, 305

BREEAM International NC v6.0, supersededRating tool

Mat 01 Life cycle impacts, criterion 5 (One credit - Environmental product declarations); CN3.2; Relevant definitions
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
per product covered by an EPD that BREEAM calls “verified”
Products
construction products, classified by Mat 03 Table 46 material categories
Scope
Not shown under BRE Global Ltd's terms
Conditions
Not shown under BRE Global Ltd's terms
Source
BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278, 279
Mat 01 Life cycle impacts, exemplary level criterion 7; CN3.2
Status
Accepted with conditions
Named as
EPD
Edition named
Not stated by the tool
On what basis
per product covered by a manufacturer specific EPD that BREEAM calls “verified”
Products
construction products, classified by Mat 03 Table 46 material categories
Scope
Not shown under BRE Global Ltd's terms
Conditions
Not shown under BRE Global Ltd's terms
Source
BREEAM International NC v6.0, superseded · Mat 01 · p. 277, 278

Not named by: WELL v2.

Read EPD’s requirements →

EU Ecolabel

Where it earns points or counts, rating tool by rating tool. About EU Ecolabel

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Australian Government ESP PolicyProcurement policy

SESP Template – Products, 'Products have a lower environmental footprint'; Evaluation guidance – Products, 'Evidence of product sustainability'
Status
Accepted as an ISO 14024 Type I ecolabel (own statement)
Named as
EU Ecolabel
Edition named
Not stated by the tool
Products
FFE, ICT Goods, Textiles
The rule
- third-party “verified” (the ESP Policy’s word)
- ecolabel to ISO 14024
Source
Australian Government ESP Policy · SESP Template (unpaginated); Evaluation guidance p. 5

EarthCheck BPDS v5Rating tool

30 Sustainable Materials Selection and Arrangement, 30.1 Green rating/eco-label schemes
Status
Accepted as an ISO 14024 Type I ecolabel (own statement)
Named as
EU Ecolabel
Edition named
Not stated by the tool
Level
4 · credits (maximum for 30.1; 1 credit per 2 qualifying material categories)
On what basis
Not shown under EarthCheck Pty Ltd's terms
Products
Material categories listed in the 30.1 guidance: Wood/timber, composites, panels; Glass; Concrete/concrete boards; Plastics and rubbers; Stone and gravel; Brick (including clay tiles and other ceramics); Gypsum; Fit outs; Floorings; Paints
Scope
Counts only for the listed material categories. 1 credit per two categories at 90% of material cost or more, up to 4 credits for 30.1.
The rule
Not shown under EarthCheck Pty Ltd's terms
Source
EarthCheck BPDS v5 · p. 75

WELL v2Rating tool

X01 Material Restrictions, Part 3 Restrict Lead, 1: Paints and electronics (paints)
Status
Accepted as an ISO 14024 Type I ecolabel (own statement)
Named as
EU Ecolabel
Edition named
Not stated by the tool
Products
Paints applied as finishes
Scope
Paint path only.
The rule
Not shown under International WELL Building Institute pbc's terms
Source
WELL v2 · X01 (materials/feature/1)
X06 VOC Restrictions, Part 1 Limit VOCs From Wet-Applied Products (VOC content)
Status
Accepted with conditions
Named as
EU Ecolabel for indoor and outdoor paints and varnishes
Edition named
Not stated by the tool
On what basis
VOC content
Products
Interior wet-applied paints and varnishes
Scope
Does not cover adhesives or sealants. Does not satisfy the separate VOC emissions requirement: at least 75% of products need third-party lab testing to CDPH v1.2, AgBB, EU LCI/EN 16516-1 or a LEED v4.1 path. Not listed in X06 Part 2.
Conditions
- Product is an indoor or outdoor paint or varnish
- Counts for the VOC content requirement only
Source
WELL v2 · X06 (materials/feature/6)
X11 Cleaning Products and Protocols, Part 2 Select Preferred Cleaning Products
Status
Outside this credit's scope
Named as
EU Ecolabel
Edition named
Not stated by the tool
Products
Cleaning products
Scope
Cleaning products, not construction products.
Source
WELL v2 · X11 (materials/feature/11)

Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read EU Ecolabel’s requirements →

Steel Sustainability Australia

Where it earns points or counts, rating tool by rating tool. About Steel Sustainability Australia

Credit names, credential names and conditions are in each rating tool's or policy's own words, shown where its publisher's terms allow.

Green Star Responsible ProductsRating tool

Counts towards Responsible Products Value

Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.1 - Level 1
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.2 - Level 1
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.3 - Level 1
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.4 - Level 1
Earns
Responsible Products Value 4 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.0 - Level 1
Earns
Responsible Products Value 8 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.0 - Level 2B
Earns
Responsible Products Value 6 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.5 - Level 1
Earns
Responsible Products Value 9 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.0 - Level 2A
Earns
Responsible Products Value 12 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.0 - Level 3
Earns
Responsible Products Value 13 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.1 - Level 2A
Earns
Responsible Products Value 13 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.1 - Level 2B
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.2 - Level 2A
Earns
Responsible Products Value 13 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.2 - Level 2B
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.3 - Level 2A
Earns
Responsible Products Value 13 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.3 - Level 2B
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.4 - Level 2A
Earns
Responsible Products Value 13 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.4 - Level 2B
Earns
Responsible Products Value 10 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.1 - Level 3
Earns
Responsible Products Value 17 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.2 - Level 3
Earns
Responsible Products Value 17 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.3 - Level 3
Earns
Responsible Products Value 17 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.4 - Level 3
Earns
Responsible Products Value 17 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.5 - Level 2A
Earns
Responsible Products Value 17 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.5 - Level 2B
Earns
Responsible Products Value 15 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value
Steel Sustainability Australia
Status
Accepted
Edition named
Steel Sustainability Australia (SSA) Certification Program v1.5 - Level 3
Earns
Responsible Products Value 21 · Responsible Standard Scoring Dashboard, 27 Oct 2026
Source
Green Star Responsible Products · Responsible Products Value

Not named by: NABERS Embodied Carbon v2.1 (pilot), IS Rating v2.1, Australian Government ESP Policy, Homestar v5, Homestar v4.1, superseded, EnviroDevelopment v4, EarthCheck BPDS v5, LEED v5 BD+C, LEED v5 ID+C, LEED v4.1 BD+C, LEED v4.1 ID+C, WELL v2, BREEAM International NC v7.1, BREEAM International NC v6.0, superseded.

Read Steel Sustainability Australia’s requirements →